SciELO - Scientific Electronic Library Online

 
vol.24 issue3Analytical formula of the mutual impedance of a partial core transformer with conductive tapesCharacterization of activated sludge from two Wastewater Treatment Plants (WWTP) in Costa Rica author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería, investigación y tecnología

On-line version ISSN 2594-0732Print version ISSN 1405-7743

Abstract

MORFIN-MAGANA, Rodrigo et al. Measurement system analysis by attributes in quality inspection for blackberries. Ing. invest. y tecnol. [online]. 2023, vol.24, n.3.  Epub Nov 17, 2023. ISSN 2594-0732.  https://doi.org/10.22201/fi.25940732e.2023.24.3.018.

This paper describes an experimental process to evaluate the efficiency of the attributes measurement systems used for blackberry quality in packing companies is described. A characteristic of this type of measurement system is its qualitative nature and the subjective assessment that quality inspectors use to assess the fruits. In this work, the analysis results of the attributes measurements systems used in two different packing companies are presented, which obtained contrasting results in the concordance analysis, that are compared through the value of the Fleiss’ Kappa statistical coefficient. The differences obtained in the two case studies are analyzed using additional data describing the characteristics of each measurement system used, which suggests a relevant factor for the results obtained in each company. Finally, the work presents a discussion of the possible improvement actions for designing and implementing an attributes measurement system for blackberry packing companies.

Keywords : Quality assessment; attribute measurement system; visual assessment; Fleiss’ Kappa.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )