SciELO - Scientific Electronic Library Online

 
vol.14 issue4Solution of the Decoupling Problem with a Fuzzy Proportional Controller of a Regular Parallel Pipelines Irrigation SystemAnalysis of Flow and Heat Transfer in a Flat Solar Collector with Rectangular and Cylindrical Geometry Using CFD author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería, investigación y tecnología

On-line version ISSN 2594-0732Print version ISSN 1405-7743

Abstract

GUTIERREZ-GONZALEZ, Eduardo; PANTELEEVA, Olga Vladimirovna; HURTADO-ORTIZ, Moisés Fernando  and  GONZALEZ-NAVARRETE, Carlos. An Inventory Model Application with Periodic Review for the Manufacture of Distribution Transformers. Ing. invest. y tecnol. [online]. 2013, vol.14, n.4, pp.537-551. ISSN 2594-0732.

The paper proposes an Inventory Application Model with a periodic review under the policy (R, S), where the demand is not constant and varies widely. A proposed model with the historical critical materials used in the manufacture of low voltage windings of distribution transformers was proposed and implemented for the company studied by decreasing the inventory shortage. We found that the inventory holding costs for minimum levels of service was approximately 90% for each of the critical items. During the year the model was applied, penalty fine payments were reduced from $831,850 to $133,350 mx.

Keywords : gamma distribution; maximum likelihood; AIC; goodness of fit test; inventory level; level of service.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License