SciELO - Scientific Electronic Library Online

 
vol.68 issue6First principle investigation of physical properties of MNiBi: (M = Sc, Y) half-Heusler compoundsPrediction of equations of state of molecular liquids by an artificial neural network author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Revista mexicana de física

Print version ISSN 0035-001X

Abstract

LOPEZ-ORTEGA, M. et al. Standard enthalpies of formation of 3-hydroxyphthalic anhydride. Rev. mex. fis. [online]. 2022, vol.68, n.6.  Epub July 31, 2023. ISSN 0035-001X.  https://doi.org/10.31349/revmexfis.68.061701.

In this investigation thermochemical properties of 3-hydroxyphthalic anhydride were determined. Fusion enthalpy, fusion temperature and molar heat capacity in solid phase were obtained by differential scanning calorimetry. By the Knudsen effusion method, the molar enthalpy of sublimation at 298.15 K was obtained. By thermogravimetric data, it was possible to determine the molar enthalpy of sublimation and the molar enthalpy of vaporization. On the other hand, the molar enthalpy of formation in solid phase at 298.15 K was determined by combustion calorimetry. The molar enthalpy of formation in gas phase at 298.15 K was calculated from molar enthalpy of sublimation at 298.15 K and molar enthalpy of formation in solid phase at 298.15 K. This experimental value was compared both theoretical enthalpy of formation in gas phase by using Gaussian methods at the G3 and G4 levels and with an estimated value in relation to phthalic anhydride.

Keywords : 3-hydroxyphthalic anhydride; thermogravimetry; Knudsen effusion; calorimetry combustion; enthalpy of formation.

        · text in English     · English ( pdf )