SciELO - Scientific Electronic Library Online

 
vol.68 issue3Al-Si-Cu alloy enhanced to high-temperature application by nickel additionHydrophobization of paper intended for packaging author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Revista mexicana de física

Print version ISSN 0035-001X

Abstract

ESQUIVEL-MENDEZ, L. A. et al. CdTe mini-modules characterization and photovoltaic performance under outdoors conditions. Rev. mex. fis. [online]. 2022, vol.68, n.3, e031005.  Epub Apr 14, 2023. ISSN 0035-001X.  https://doi.org/10.31349/revmexfis.68.031005.

Polycrystalline CdTe thin films deposited in large areas present some difficulties, such as non-uniformity over the entire area. It is well known that the ratio between the thickness and grain size of CdTe thin films is approximately one. In contrast, the pin holes in CdTe should be minimized. CdS thin films as window materials must guarantee a uniform transparent film free of pinholes to avoid short-circuit in the photovoltaic device. In this work, CdTe and CdS thin films are reported in areas of 40 cm2 with optimal physical properties for potential application on solar cells. CdTe mini-modules were fabricated using CdTe and CdS layers obtained and characterized under outdoor conditions. The current-voltage measurements were performed under different load and solar irradiance conditions.

Keywords : CdTe mini-modules; solar cells; thin films; CdS; CdTe.

        · text in English     · English ( pdf )