SciELO - Scientific Electronic Library Online

 
vol.51 issue5Determination of the point and space groups for hydroxyapatite by computer simulation of CBED electron diffraction patternsSíntesis y caracterización de materiales moleculares de ftalocianinas metálicas en el módulo electroquímico del microscopio de fuerza atómica author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Revista mexicana de física

Print version ISSN 0035-001X

Rev. mex. fis. vol.51 n.5 México Oct. 2005

 

Instrumentación

 

Diseño de sistemas ópticos afocales con microlentes de silicio

 

A.G. Rojas H., F. Renero C., W. Calleja y R. Pérez R.

 

Instituto Nacional de Astrofísica Óptica y Electrónica, Apartado Postal 51 y 216 Puebla, 72000, México, Telfax: (52)(2) 2 4729 40, e-mail: agrojas@inaoep.mx, paco@inaoep.mx, wcalleja@inaoep.mx, raperez@inaoep.mx

 

Recibido el 22 de abril de 2004.
Aceptado el 6 de junio de 2005.

 

Resumen

Presentamos diseños de sistemas ópticos afocales para la longitud de onda de 1.5/μm. Los diseños están basados en el telescopio galileano, formado por una lente negativa de silicio con diámetro 305 μm y la lente positiva elegida entre 10 diferentes materiales de acuerdo a su desempeño óptico, evaluado mediante el cálculo de la aberración esférica y la razón de Strehl del sistema. La evaluación muestra que el mejor desempeño es obtenido con el ZnSe.

Descriptores: Sistemas ópticos; transmisión infrarroja; materiales de aberturas; colimadores.

 

Abstract

Design of afocal systems, for 1.5/μm wavelength, are presented. They are based on the Galilean Telescope, composed of a silicon negative microlens (305 μm diameter) and a positive lens chosen between 10 different materials, according to the best optical performance. The spherical aberration and the Strehl ratio are used to compute the best optical performance. It is shown that the afocal system, that uses the ZnSe as the positive lens, has the best optical performance.

Keywords: Optical system; infrared transmitting; aperture materials; collimators.

 

PACS: 42.15.Eq; 42.70.Km; 42.79.Ag

 

DESCARGAR ARTÍCULO EN FORMATO PDF

 

Agradecimientos

Este trabajo fue realizado mediante el proyecto CONACyT 34139A. Armando Gregorio Rojas Hernández (becario del CONACyT) agradece el apoyo económico a CONACyT por medio de Beca-Credito 136575. Los autores agradecen a Felix Gracia Témich, Edgar Méndez Martínez por sus comentarios y sugerencias; y al INAOE por facilitar sus instalaciones e infraestructura.

 

Referencias

1. D.L. Kendall, W.P. Eaton y R. Manginell, Optical Enginering 33 (1994) 3578 .         [ Links ]

2. M. Laikin, Lens design, 3a. Edi. (Marcel Dekker, Inc., New York, 2001) p. 159.         [ Links ]

3. E. Hecht y A. Zajac, Óptica, 3a Edi. (Addison-Wesley Iberoamericana,E.U.A,1986)p. 161        [ Links ]

4. W.J. Smith, Modern optical engineering, 3a. Ed. (McGraw-Hill,2000) p. 215.         [ Links ]

5. ZEMAX-EE Optical Design Program, Focus Software, Inc., (Tucson, 2001).         [ Links ]

6. Essential Macleod optical coating design program, version 7.3, (Tucson, 1998).         [ Links ]

7. H.A. Macleod, Thin-film optical filters, Elsevier publishing co., appendix. I, (New York 1969) p. 316.         [ Links ]

8. M. Ohring, Academic-Press. (1992) 518.

9. Optics reference, Lambda Research Corporation, OSLO Software and Optics Reference version 6.1,(Littleton, MA. 2001)100,149.         [ Links ]

10. M. Kufnery S. Kufner, VUBPRESS-Brussels (1997) 196.

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License