<?xml version="1.0" encoding="ISO-8859-1"?><article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<front>
<journal-meta>
<journal-id>1665-6423</journal-id>
<journal-title><![CDATA[Journal of applied research and technology]]></journal-title>
<abbrev-journal-title><![CDATA[J. appl. res. technol]]></abbrev-journal-title>
<issn>1665-6423</issn>
<publisher>
<publisher-name><![CDATA[Universidad Nacional Autónoma de México, Instituto de Ciencias Aplicadas y Tecnología]]></publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id>S1665-64232020000200069</article-id>
<title-group>
<article-title xml:lang="en"><![CDATA[Machine tool vibration on dimensional accuracy and surface roughness during milling operation of Al6082 with indexable carbide inserts]]></article-title>
</title-group>
<contrib-group>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Chamble]]></surname>
<given-names><![CDATA[Paramesh]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Bharath]]></surname>
<given-names><![CDATA[M. R.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Lokesha]]></surname>
<given-names><![CDATA[K.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Ezhil Singh]]></surname>
<given-names><![CDATA[S. Christopher]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
</contrib-group>
<aff id="Af1">
<institution><![CDATA[,Ramaiah Institute of Technology Department of Mechanical Engineering ]]></institution>
<addr-line><![CDATA[Bangalore Karnataka]]></addr-line>
<country>India</country>
</aff>
<aff id="Af2">
<institution><![CDATA[,Vimal Jyothi Engineering College Department of Mechanical Engineering ]]></institution>
<addr-line><![CDATA[Kannur Kerala]]></addr-line>
<country>India</country>
</aff>
<pub-date pub-type="pub">
<day>00</day>
<month>00</month>
<year>2020</year>
</pub-date>
<pub-date pub-type="epub">
<day>00</day>
<month>00</month>
<year>2020</year>
</pub-date>
<volume>18</volume>
<numero>2</numero>
<fpage>69</fpage>
<lpage>76</lpage>
<copyright-statement/>
<copyright-year/>
<self-uri xlink:href="http://www.scielo.org.mx/scielo.php?script=sci_arttext&amp;pid=S1665-64232020000200069&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://www.scielo.org.mx/scielo.php?script=sci_abstract&amp;pid=S1665-64232020000200069&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://www.scielo.org.mx/scielo.php?script=sci_pdf&amp;pid=S1665-64232020000200069&amp;lng=en&amp;nrm=iso"></self-uri><abstract abstract-type="short" xml:lang="en"><p><![CDATA[Abstract In this research paper, machining tool vibration occurs because of relative motion between the work piece and the cutting tool, which influences the surface finish of the machined part and the lifespan of the cutting tool. Some of the parameters that influence machining tool vibration include feed rate, depth of cut and spindle speed. In this study, experimentation is carried out on a conventional vertical milling machine to investigate the influence of machining tool vibration on surface roughness during face milling operation of Al6082 alloy with indexable carbide inserts. The eutectic phase for joint of Al6082 is &#946;-Al5FeSi eutectic phase. The machining is done in dry condition under the different combinations of Machining parameters designed through Taguchi L9 orthogonal array. The machining tool vibrations are captured with the help of tri-axial accelerometer. Analysis of variance (ANOVA) technique used to formulate the experimental data to analyze the effect of each parameter and machining tool vibration on surface roughness.]]></p></abstract>
<kwd-group>
<kwd lng="en"><![CDATA[Machining]]></kwd>
<kwd lng="en"><![CDATA[surface roughness]]></kwd>
<kwd lng="en"><![CDATA[vibrations]]></kwd>
<kwd lng="en"><![CDATA[Taguchi]]></kwd>
<kwd lng="en"><![CDATA[ANOVA]]></kwd>
</kwd-group>
</article-meta>
</front><back>
<ref-list>
<ref id="B1">
<nlm-citation citation-type="confpro">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Kusuma]]></surname>
<given-names><![CDATA[N.]]></given-names>
</name>
<name>
<surname><![CDATA[Agrawal]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<name>
<surname><![CDATA[Shashikumar]]></surname>
<given-names><![CDATA[V.]]></given-names>
</name>
</person-group>
<source><![CDATA[Investigation on the influence of Cutting Parameters on Machine Tool Vibration and Surface Finish Using MEMS Accelerometer in High Precision CNC Milling Machine]]></source>
<year>2014</year>
<conf-name><![CDATA[ Design and Research Conference]]></conf-name>
<conf-loc> </conf-loc>
<page-range>375-1 -375-6</page-range></nlm-citation>
</ref>
<ref id="B2">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Lmalghan]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
<name>
<surname><![CDATA[Rao]]></surname>
<given-names><![CDATA[M, C. K.]]></given-names>
</name>
<name>
<surname><![CDATA[Arun Kumar]]></surname>
<given-names><![CDATA[S.]]></given-names>
</name>
<name>
<surname><![CDATA[Rao]]></surname>
<given-names><![CDATA[S. S.]]></given-names>
</name>
<name>
<surname><![CDATA[Herbert]]></surname>
<given-names><![CDATA[M. A.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Machining Parameters Optimization of AA6061 Using Response Surface Methodology and Particle Swarm Optimization]]></article-title>
<source><![CDATA[International Journal of Precision Engineering and Manufacturing]]></source>
<year>2018</year>
<volume>19</volume>
<numero>5</numero>
<issue>5</issue>
<page-range>695-704</page-range></nlm-citation>
</ref>
<ref id="B3">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Moshat]]></surname>
<given-names><![CDATA[S.]]></given-names>
</name>
<name>
<surname><![CDATA[Datta]]></surname>
<given-names><![CDATA[S.]]></given-names>
</name>
<name>
<surname><![CDATA[Bandyopadhyay]]></surname>
<given-names><![CDATA[A.]]></given-names>
</name>
<name>
<surname><![CDATA[Pal]]></surname>
<given-names><![CDATA[P. P.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Optimization of CNC end Milling Process Parameter Using PCA-based Taguchi Method]]></article-title>
<source><![CDATA[International Journal of Engineering Reaserch and Technology]]></source>
<year>2010</year>
<volume>2</volume>
<numero>1</numero>
<issue>1</issue>
<page-range>92-102</page-range></nlm-citation>
</ref>
<ref id="B4">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Prasadraju]]></surname>
<given-names><![CDATA[K.]]></given-names>
</name>
<name>
<surname><![CDATA[Satish Raja]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<name>
<surname><![CDATA[Praveen]]></surname>
<given-names><![CDATA[V.]]></given-names>
</name>
<name>
<surname><![CDATA[Ajith Kumar]]></surname>
<given-names><![CDATA[I.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Optimization of Process parameter for milling operation using Taguchi method]]></article-title>
<source><![CDATA[International Journal of Engineering Trends and Technology]]></source>
<year>2017</year>
<volume>48</volume>
<numero>1</numero>
<issue>1</issue>
<page-range>1-6</page-range></nlm-citation>
</ref>
<ref id="B5">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Rawangwong]]></surname>
<given-names><![CDATA[S.]]></given-names>
</name>
<name>
<surname><![CDATA[Chatthong]]></surname>
<given-names><![CDATA[J.]]></given-names>
</name>
<name>
<surname><![CDATA[Boonchouytan]]></surname>
<given-names><![CDATA[W.]]></given-names>
</name>
<name>
<surname><![CDATA[Burapa]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Influence of Cutting Parameters in Face Milling Semi-solid AA 7075 Using Carbide Tool Affected the Surface Roughness and Tool Wear]]></article-title>
<source><![CDATA[Energy Procedia]]></source>
<year>2014</year>
<volume>56</volume>
<page-range>448-57</page-range></nlm-citation>
</ref>
<ref id="B6">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Ribeiro]]></surname>
<given-names><![CDATA[J. E.]]></given-names>
</name>
<name>
<surname><![CDATA[Cesar]]></surname>
<given-names><![CDATA[M. B.]]></given-names>
</name>
<name>
<surname><![CDATA[Lopes]]></surname>
<given-names><![CDATA[H.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Optimisation of Machining Parameters to Improve the Surface Quality]]></article-title>
<source><![CDATA[Procedia Structural Integrity]]></source>
<year>2017</year>
<volume>5</volume>
<page-range>355-62</page-range></nlm-citation>
</ref>
<ref id="B7">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Subramanian]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<name>
<surname><![CDATA[Sakthivel]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<name>
<surname><![CDATA[Sooryaprakash]]></surname>
<given-names><![CDATA[K.]]></given-names>
</name>
<name>
<surname><![CDATA[Sudhakaran]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Optimization of end Mill Tool Geometry Parameter for Al7075-t6 Machining Operation Based on Vibratuion Amplitude by Response Surface Methodology]]></article-title>
<source><![CDATA[Measurement]]></source>
<year>2013</year>
<volume>46</volume>
<numero>10</numero>
<issue>10</issue>
<page-range>4005-22</page-range></nlm-citation>
</ref>
<ref id="B8">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Sukumar]]></surname>
<given-names><![CDATA[M. S.]]></given-names>
</name>
<name>
<surname><![CDATA[Venkata Ramaiah]]></surname>
<given-names><![CDATA[P.]]></given-names>
</name>
<name>
<surname><![CDATA[Nagarjun]]></surname>
<given-names><![CDATA[A.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Optimization and Prediction of Parameters in Face Milling of Al-6061 Using Taguchi and ANN Approach]]></article-title>
<source><![CDATA[Procedia Engineering]]></source>
<year>2014</year>
<volume>97</volume>
<page-range>365-71</page-range></nlm-citation>
</ref>
<ref id="B9">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Suresh Babu]]></surname>
<given-names><![CDATA[V.]]></given-names>
</name>
<name>
<surname><![CDATA[Sriram Kumar]]></surname>
<given-names><![CDATA[S.]]></given-names>
</name>
<name>
<surname><![CDATA[Murali]]></surname>
<given-names><![CDATA[R. V.]]></given-names>
</name>
<name>
<surname><![CDATA[Madhava Rao]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Investigation and Validation of Optimal Cutting Parameters for Least Surface Roughness in EN24 with Response Surface Method]]></article-title>
<source><![CDATA[International Journal of Engineering, Science and Technology]]></source>
<year>2011</year>
<volume>3</volume>
<numero>6</numero>
<issue>6</issue>
<page-range>146-60</page-range></nlm-citation>
</ref>
</ref-list>
</back>
</article>
