Servicios Personalizados
Revista
Articulo
Indicadores
-
Citado por SciELO
-
Accesos
Links relacionados
-
Similares en SciELO
Compartir
Superficies y vacío
versión impresa ISSN 1665-3521
Superf. vacío vol.23 no.4 Ciudad de México dic. 2010
Características de películas de SiOF obtenidas por APCVD con HF como fuente de flúor
M. Pacio*, H. Juárez, T. Díaz, G. García, E. Rosendo, G. Escalante y R. Pérez
Centro de Investigaciones en Dispositivos Semiconductores, Benemérita Universidad Autónoma de Puebla 14 Sur y San Claudio, Ciudad Universitaria, C. P. 72570, Puebla, México.
Recibido: 30 de junio de 2010.
Aceptado: 12 de noviembre de 2010.
Resumen
Se obtuvieron películas de óxido de silicio fluorado (SiOF) en un reactor convencional de depósito químico en fase vapor a presión atmosférica (APCVD), usando tetraetilortosilicato (TEOS) y ozono (O3) como precursores de SiO2, el anhídrido fluorhídrico fue empleado para la incorporación de átomos de flúor. Las películas fueron depositadas variando la temperatura del sustrato en el intervalo de 200 a 275 °C. La estructura de los enlaces químicos de las películas fue evaluada por espectroscopia infrarroja de transformada de Fourier (FTIR), y el índice de refracción por elipsometría. Los espectros FTIR de absorbancia de las películas depositadas muestran el modo de vibración correspondiente a enlaces SiF y cuya intensidad depende de la concentración de átomos, y ésta a su vez depende de la temperatura de depósito. La incorporación de flúor tiene una contribución en la reducción del índice de refracción en las películas de SiOF, el cual, disminuye de 1.46 a 1.35. Por lo tanto, el principal mecanismo responsable para esta disminución es la porosidad generada en las películas debido a la incorporación de flúor en la red. La constante dieléctrica fue reducida de 4.2, que corresponde a películas de SiO2, a valores que se encuentran en el intervalo de 3.18 a 3.6, para películas de SiOF obtenidas por la técnica APCVD.
Palabras clave: Sistema APCVD; Películas de SiOF; TEOS; Espectroscopia FTIR; SIMS.
Abstract
Fluorinated silicon oxide (SiOF) films were obtained in a conventional atmospheric pressure chemical vapor deposition (APCVD) reactor, using tetraethoxysilane (TEOS) and ozone (O3) as precursor of SiO2, and the fluorhydric anhydride was used for incorporation of fluorine atoms. The SiOF films were deposited changing the temperature of the substrate in the range of 200 to 275 °C. The chemical bonding structure of the films was evaluated by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and the refractive index by ellipsometry.
FTIR absorption spectra of the films deposited show the vibration mode corresponding to SiF bonds and its intensity depend of the deposit temperature and of the atoms concentration. The incorporation of fluorine has a contribution in the reduction of the refractive index of SiOF films, which decrease of 1.46 to 1.35. Therefore, the main mechanism responsible for the reduction of the refractive index is the porosity, generated by the incorporation of the fluorine atom in the network. Dielectric constant was reduced of 4.2, that corresponding to SiO2 films, to values in the range of 3.18 to 3.6 for SiOF films by APCVD technique.
Keywords: APCVD system; SiOF films; TEOS; FTIR spectroscopy; SIMS.
DESCARGAR ARTÍCULO EN FORMATO PDF
Referencias
[I]. T. Homma, Materials Chemistry and Physics, 41, 234 (1995). [ Links ]
[2]. H. Juárez, T. Díaz, M. Pacio, G. García S. E. Rosendo, M. Rubín, G. Romero, A. García and C. Morales, Phys. Stat. Sol. (c), 4, 1481 (2007). [ Links ]
[3]. T. Homma, R. Yamaguchi and Y. Murao, J. Electrochem. Soc., 140, 687 (1993). [ Links ]
[4]. T. Usami, K. Shimokawa and M. Yoshimaru, Jpn. J. Appl. Phys. Part 1, 33, 408 (1994). [ Links ]
[5]. V. L. Shannon and M. Z. Karim, Thin Solid Films, 270, 498 (1995). [ Links ]
[6]. P. F. Wang, S. J. Ding, D. W. Zhang, J, T. Wang and W. W. Lee, Thin Solid Films, 385, 115 (2001). [ Links ]
[7]. Y. J. Mei, T. C. Chang, S. J. Chang, F. M. Pan, M, S, K. Chen, A. Tuan, S. Chuo, and C. Y. Chang, Thin Solid Films, 308, 501 (1997). [ Links ]
[8]. S. M. Han and E. S. Aydil: J. Appl. Phys., 83, 2172 (1998). [ Links ] [9]. J. K. Kim, S. H. Jeong, B. S. Kim and S. H. Shim, J.Phys. D: Appl. Phys., 37, 2425 (2004). [ Links ]
[10]. V. Pankov, J. C. Alonso and A Ortiz: J. Appl. Phys., 86, 275 (1999). [ Links ]
[11]. W. Kern and D. A. Poutinen, RCA Rev. 31, 187 (1970) [ [ Links ]12]. H. Juárez, T. Díaz, M. Cuamatzi, E. Rosendo, J. Martínez, M. Pacio, J. A. García, and J. C. Pacheco, X Workshop IBERCHIP, Cartagena de Indias, Colombia, 1012 March 2004 [ Links ]
[13]. T. Homma, Thin Solid Films, 278, 28 (1996). [ Links ]
[14]. J. S. Chou and S. C. Lee, J. Appl. Phys., 77, 1805 (1995). [ Links ]
[15].P.G. Pai, S. S. Chao, Y. Takagi, and G. Lucovsky, J. Vac. Sci. Technol. A, 4, 689 (1989) [ Links ]
[16]. M. Pacio, H. Juárez, G. Escalante, G. García, T. Díaz, E. Rosendo, Mater. Sci. Eng. B, 174, 38 (2010) [ Links ]
[17]. C. Morales, H. Juárez, T. Díaz, Y. Matsumoto, E. Rosendo, G. García, M. Rubín, F. Mora, M. Pacio, A. García, Microelectron. J., 39, 586 (2008). [ Links ]