SciELO - Scientific Electronic Library Online

 
vol.72 número3Vetas de cromitita en ortopiroxenita anómalamente enriquecidas en minerales del grupo del platino de la ofiolita Habana-Matanzas, CubaPetrología y geoquímica de cromititas ricas en Al de la Unidad Metaharzburgítica de Medellín (UMM), Colombia índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Boletín de la Sociedad Geológica Mexicana

versão impressa ISSN 1405-3322

Bol. Soc. Geol. Mex vol.72 no.3 Ciudad de México Dez. 2020  Epub 11-Out-2021

https://doi.org/10.18268/bsgm2020v72n3a080420 

Articles

Metamorphic fingerprints of Fe-rich chromitites from the Eastern Pampean Ranges, Argentina

Evidencias del metamorfismo en cromititas ricas en Fe del oriente de las Sierras Pampeanas, Argentina

Vanessa Colás1  * 

Ignacio Subías2   

José María González-Jiménez3 

Joaquín A. Proenza4 

Isabel Fanlo2 

Antoni Camprubí1 

William L. Griffin5 

Fernando Gervilla3  6 

Suzanne Y. O’Reilly5 

Monica F. Escayola7 

1Instituto de Geología, Universidad Nacional Autónoma de México, Ciudad Universitaria, Coyoacán, 04510, CDMX, México.

2Universidad de Zaragoza, Departamento de Ciencias de la Tierra, Pedro Cerbuna 12, 50009 Zaragoza, Spain.† Rest in peace.

3Departamento de Mineralogía y Petrología, Universidad de Granada, Facultad de Ciencias, Avenida. Fuentenueva s/n, 18002 Granada, Spain.

4Departament de Mineralogia, Petrologia i Geologia Aplicada, Universitat de Barcelona. C/Martí i Franquès s/n, 08028 Barcelona, Spain.

5ARC Centre of Excellence for Core to Crust Fluid Systems (CCFS) and GEMOC National Key Centre, Department of Earth and Planetary Sciences, Macquarie University, Sydney, NSW 2109, Australia.

6Instituto Andaluz de Ciencias de la Tierra (Universidad de Granada-CSIC), Avenida las Palmeras 4, Armilla, 18100 Granada, Spain.

7Instituto de Ciencias Polares y Ambientales ICPA, Universidad de Tierra del Fuego-CONICET, Fueguia Basket 251, 9410-Ushuaia, Tierra del Fuego, Argentina.


Abstract

Chromitites hosted in the serpentinized harzburgite bodies from Los Congos and Los Guanacos (Eastern Pampean Ranges, north Argentina) record a complex metamorphic evolution. The hydration of chromitites during the retrograde metamorphism, their subsequent dehydration during the prograde metamorphism and the later-stage cooling, have resulted in a threefold alteration of chromite: i) Type I is characterized by homogeneous Fe3+- and Cr-rich chromite; ii) Type II chromite contains exsolved textures that consist in blebs and fine lamellae of a magnetite-rich phase hosted in a spinel-rich phase; iii) Type III chromite is formed by variable proportions of magnetite-rich and spinel-rich phases with symplectitic texture. Type I chromite shows lower Ga and higher Co, Zn and Mn than magmatic chromites from chromitites in suprasubduction zone ophiolites as a consequence of the redistribution of these elements between Fe3+-rich non-porous chromite and silicates during the prograde metamorphism. Whereas, the spinel-rich phase in Type III chromite is enriched in Co, Zn, Sc, and Ga, but depleted in Mn, Ni, V and Ti with respect to the magnetite-rich phase, due to the metamorphic cooling from high-temperature conditions. The pseudosection calculated in the fluid-saturated FCrMACaSH system, and contoured for Cr# and Mg#, allows us to constrain the temperature of formation of Fe3+-rich non-porous chromite by the diffusion of magnetite in Fe2+-rich porous chromite at <500 ºC and 20 kbar. The subsequent dehydration of Fe3+-rich non-porous chromite by reaction with antigorite and chlorite formed Type I chromite and Mg-rich olivine and pyroxene at >800 ºC and 10 kbar. The ultimate hydration of silicates in Type I chromite and the exsolution of Type II and Type III chromites would have started at ~600 ºC. These temperatures are in the range of those estimated for ocean floor serpentinization (<300 ºC and <4 kbar), the regional prograde metamorphism in the granulite facies (800 ºC and <10 kbar), and subsequent retrogression to the amphibolite facies (600 ºC and 4-6.2 kbar) in the host ultramafic rocks at Los Congos and Los Guanacos. A continuous and slow cooling from granulite to amphibolite facies produced the exsolution of spinel-rich and magnetite-rich phases, developing symplectitic textures in Type III chromite. However, the discontinuous and relatively fast cooling produced the exsolution of magnetite-rich phase blebs and lamellae within Type II chromite. The P-T conditions calculated in FCrMACaSH system and the complex textural and geochemical fingerprints showed by Type I, Type II and Type III chromites leads us to suggest that continent-continent collisional orogeny better records the fingerprints of prograde metamorphism in ophiolitic chromitites.

Keywords: altered chromite; minor and trace elements; thermodynamic modelling; prograde metamorphism; Eastern Pampean Ranges; Argentina

Resumen

Las cromititas incluidas en los cuerpos de harzburgita serpentinizada de Los Congos y Los Guanacos (Sierras Pampeanas Orientales, norte de Argentina) registran una evolución metamórfica compleja. La hidratación de las cromititas durante el metamorfismo retrógrado, su posterior deshidratación durante el metamorfismo prógrado y el subsecuente enfriamiento ha dado como resultado la formación de tres tipos de cromita alterada: i) Tipo I, caracterizada por una cromita homogénea y rica en Fe3+ y Cr; ii) cromita Tipo II, con texturas de exsolución que consisten en gránulos y lamelas finas de una fase rica en magnetita alojada en una fase rica en espinela; iii) cromita Tipo III, formada por proporciones variables de las fases ricas en magnetita y espinela con textura simplectítica. La cromita Tipo I muestra menor Ga pero mayor Co, Zn y Mn que las cromitas magmáticas de las cromititas ofiolíticas en zonas de suprasubducción como consecuencia de la redistribución de estos elementos entre la cromita no porosa rica en Fe3+ y los silicatos durante el metamorfismo prógrado. En cambio, la fase rica en espinela en la cromita Tipo III está enriquecida en Co, Zn, Sc y Ga, pero empobrecida en Mn, Ni, V y Ti respecto a la fase rica en magnetita debido al enfriamiento metamórfico desde condiciones de alta temperatura. La pseudosección calculada en el sistema FCrMACaSH saturado de agua y contorneada para el #Cr y #Mg, nos permite restringir la temperatura de formación de la cromita no porosa rica en Fe3+ debido a la difusión de la magnetita en la cromita porosa rica en Fe2+ a <500 ºC y 20 kbar. La posterior deshidratación de la cromita no porosa rica en Fe3+ formó por reacción con antigorita y clorita, cromita Tipo I y olivino y piroxeno ricos en Mg a >800 ºC y 10 kbar. La hidratación final de los silicatos en la cromita Tipo I y la exsolución de las cromitas Tipo II y Tipo III pudo haber comenzado a ~600 ºC. Estas temperaturas están en el rango de las estimadas para la serpentinización de fondo oceánico (<300 ºC y <4 kbar), el metamorfismo regional prógrado en facies de granulita (800 ºC y <10 kbar), y la posterior retrogresión a facies de anfibolita (600 ºC y 4-6.2 kbar) de las rocas ultramáficas encajantes en Los Congos y Los Guanacos. Un enfriamiento continuo y lento de facies de granulita a anfibolita produjo la exsolución de las fases ricas en espinela y magnetita, desarrollando texturas simpléctíticas en la cromita Tipo III. Sin embargo, el enfriamiento discontinuo y relativamente rápido produjo la exsolución de los gránulos y las lamelas de la fase rica en magnetita dentro de la cromita Tipo II. Las condiciones P-T calculadas en el sistema FCrMACaSH y las complejas texturas y firmas geoquímicas mostradas por las cromitas Tipo I, Tipo II y Tipo III nos permiten sugerir que las orogenias que implican la colisión continente-continente registran mejor las firmas del metamorfismo prógrado en las cromititas ofiolíticas.

Palabras clave: cromita alterada; elementos menores y traza; modelización termodinámica; metamorfismo prógrado; Sierras Pampeanas Orientales; Argentina

1. Introduction

Chromitites chiefly consist of Cr- and Al-rich chromite (generally, >80 vol.% of chromite; Arai and Miura, 2016), which represent the main reservoir of chromium in nature. Chromitite orebodies large enough for mining are spatially associated with mafic and ultramafic rocks and their serpentinized equivalents, and are generally found in: i) continental layered intrusions forming stratiform chromitites, and ii) different parts of the oceanic ophiolitic sequences as a “podiform” or “stratiform” chromitites (e.g., Leblanc and Nicolas, 1992; Stowe, 1994; González-Jiménez et al., 2014 and references therein). Besides their economic importance, chromitites are also scientifically relevant because the composition and microstructural features of chromite, and the mineralogy of their inclusions (i.e., ultra-high pressure, super-reducing and continental crust minerals) provide valuable information about the nature, evolution and geodynamics of the Earth’s lithosphere (e.g., Dick and Bullen, 1984; Arai, 1992; Barnes and Roeder, 2001; Kamenetsky et al. 2001; Rollinson, 2008; González-Jiménez et al., 2014; Arai and Miura, 2016; Griffin et al., 2016; Xiong et al. 2017; Farré-de-Pablo et al., 2019; Pujol-Solà et al., 2018; Tanner et al., 2019).

Mineralogical, geochemical and thermodynamic studies performed in “meta-chromitite bodies” from suprasubduction zone ophiolitic sections in Tehuitzingo and Loma Baya in southern Mexico (Proenza et al., 2004; Ortiz-Hernández et al., 2006; González-Mancera et al., 2009; González-Jiménez et al., 2015, 2017; Colás et al., 2019; Farré-de-Pablo et al., 2019), Tapo in Peru (Castroviejo et al., 2009; Tassinari et al., 2011; Colás et al., 2017), and La Cabaña in Chile (Barra et al., 2014; González-Jiménez et al., 2016; Plissart et al., 2019) suggest that during their exhumation the primary silicates (olivine and pyroxene) are transformed by serpentine and chlorite, while the magmatic chromites are replaced by Fe2+-rich porous and/or Fe3+-rich non-porous chromite. This metamorphic alteration takes place in presence of reducing/oxidizing (Fe3+-) SiO2-rich and MgO-poor fluids, at temperatures below 700 ºC (e.g., Gervilla et al., 2012; Barra et al., 2014; Colás et al., 2014, 2017, 2019; González-Jiménez et al., 2016, 2018; Farré-de-Pablo et al., 2019). In contrast, the dehydration of previously hydrated chromitites by contact metamorphism turns back the metamorphic reaction, forming a non-porous chromite with a composition close to primary chromite and Mg-rich olivine, at temperatures above 550-600 ºC (González-Jiménez et al., 2015). The analysis of chromite using LA-ICP-MS have revealed that during metamorphism the cores of chromite grains may retain their initial magmatic signature, particularly during the formation of Fe2+-rich porous chromite (Barra et al., 2014; Colás et al., 2014, 2017, 2019; González-Jiménez et al., 2015, 2016; Kapsiotis et al., 2018; Yu et al., 2019). Meanwhile, several minor and trace elements (i.e., V, Sc, Ga, Ti, Ni, Zn, Co and Mn) may pervade into the cores during the formation of Fe3+-rich non-porous chromite (González-Jiménez et al., 2016, Colás et al., 2019). This demonstrates that minor and trace elements are mobile during the alteration of chromitite bodies and, therefore, they define fingerprints of retrograde hydrous metamorphism. However, this issue has never been examined on chromitites affected by prograde regional metamorphism.

In this research work we provide a detailed study including petrographic observations, analysis of major, minor and trace element composition of chromites, coupled with thermodynamic modelling for chromitite bodies from Los Congos and Los Guanacos ultramafic massifs in the Eastern Pampean Ranges, northern Argentina (Escayola et al., 2004; Proenza et al., 2008). These ultramafic massifs are among the few known examples of suprasubduction zone ophiolites in Latin America that contain a mantle section with chromitites that have experienced high-temperature metamorphism as a result of a continent-continent collisional orogeny (e.g., Escayola et al., 2007; Collo et al., 2009). Therefore, this regional context is important to evaluate the geochemical fingerprints of prograde metamorphism in chromites from ophiolitic chromitites.

2. Geological setting

The Eastern Pampean Ranges constitute the easternmost exposure of the metamorphic basement of the Central Andes, in northern Argentina (Figure 1), and represent an accretionary orogen developed during the Neoproterozoic-Early Cambrian at the SW paleo-Pacific margin of Gondwana (e.g., Escayola et al., 2007; Collo et al., 2009). The Eastern Pampean Ranges are mainly composed of low- to high-grade metamorphic sedimentary and igneous units that are essentially constituted by garnet-biotite gneiss and biotite schists, with minor occurrence of marbles, phyllites, amphibolites and ultramafic rocks of ophiolitic affinity (e.g., Escayola et al., 1996, 2004, 2007; Rapela et al., 1998, 2016). These units were locally migmatized (i.e., San Carlos Massif and Yacanto Group; Martino et al., 1995; Siegesmund et al., 2010; Guereschi and Martino, 2008) and intruded by Early Cambrian granitoids (Rapela et al., 1998; Escayola et al., 2007) (Figure 1). All the basement units were intruded by Ordovician and Devonian metaluminous to peraluminous granitoids (e.g., Rapela et al., 1998, 2018; Pinotti et al., 2002; Geuna et al., 2008) and were locally covered by Cretaceous volcanic-sedimentary sequences and Cenozoic volcanic rocks (Ramos et al., 1991; Kay and Gordillo, 1994; Lagorio et al., 2016 and references therein) (Figure 1).

Figure 1 Simplified geological map of the Eastern Pampean Ranges (modified from Martino, 2003 and Siegesmund et al., 2010) showing the location of Los Congos and Los Guanacos ultramafic massifs hosting the chromitite bodies investigated in this work. 

The ultramafic bodies are arranged into two NW-SE belts associated with ductile shear zones that crosscut the migmatitic massifs, gneisses and schists (Figure 1). Los Congos and Los Guanacos ultramafic massifs (up to 1.3 km long and 0.7 km wide) are merely 6 km away of each other, and outcrop in the southwestern ophiolitic belt of the Eastern Pampean Ranges, along the Sierra de Comechingones (Figures 1 and 2). Such massifs consist of partly to strongly serpentinized harzburgites that host chromitite bodies, which are accompanied by lenses of dunites and impregnated peridotites, and are cut by pyroxenite, gabbro and basalt dikes (0.5 to 1 m thick and several meters long) in Los Guanacos massif (Escayola et al., 2004, 2007; Proenza et al., 2008). These lithologies are in tectonic contact with metapelites, tonalitic gneisses and marbles (Figure 2), and were considered as a fragment of a Neoproterozoic (647 ± 77 Ma; Escayola et al., 2007) back-arc ophiolite sequence represented by: i) the porphyroclastic harzburgite tectonites in Los Congos massif, and ii) the Moho Transition Zone (MTZ) in Los Guanacos massif (Escayola et al., 2004, 2007; Ramos et al., 2010).

Figure 2 Simplified geological map of Los Congos and Los Guanacos ultramafic massifs (modified from Escayola et al., 2004). 

Based on mineral assemblages and textures, Escayola et al. (1996, 2004) distinguished four metamorphic events in the ultramafic rocks of the Sierra de Comechingones. The first event of metamorphism occurred at ocean floor conditions, and is characterized by the replacement of primary olivine by lizardite/chrysotile with mesh and pseudomorphic textures, and by the replacement of pyroxene by bastite (<300 ºC and <4 kbar). During the second event, the regional prograde metamorphism produced the transformation of lizardite to antigorite along with olivine-bearing assemblages at 780-800 ºC and <10 kbar. The third event of metamorphism led to the retrogression of olivine to anthophyllite and antigorite+brucite at 500 ºC. The last metamorphic event is related to the formation of veins of talc+chrysotile during a low-temperature hydrothermal event. The second and the third metamorphic events recorded in the ultramafic rocks were associated with the collisional episode and the subsequent decompression and exhumation of the accretionary orogeny.

These metamorphic events were also recorded in the basement of Eastern Pampean Ranges. The second stage of metamorphism occurred under granulite facies conditions, peaking at 800 ± 150 ºC and 7.5 ± 5 kbar, and the retrogression to the amphibolite facies occurred at 600 ºC and 4.5 ± 1.5 kbar in gneisses, migmatites and granulites from the Sierra de Comechingones (Otamendi et al., 1999, 2004, 2005). However, higher pressure metamorphic peak conditions (810 ± 50 °C and 8.6 ± 0.8 kbar), and the highest temperature for the amphibolite facies overprint (715 ± 15 °C and 4 ± 0.5 kbar) were estimated in metagabbros, garnet migmatites and tonalities from the Sierra Chica and Sierra Grande (Rapela et al., 1998). In addition, Martino et al. (2010) reported similar metamorphic peak conditions (804 ± 36 ºC and 7.9 ± 0.7 kbar) on garnet gneisses of the Sierra Chica, but recorded a lower temperature and higher pressure overprint (649 ± 61 ºC and 6.2 ± 1 kbar) than Rapela et al. (1998).

The chromitite samples collected for this study were obtained from six chromitite bodies from Los Congos and Los Guanacos ultramafic massifs (Proenza et al., 2008). Chromitite bodies occurred as small pods and layers, few tens of meters long and less than 5 m thick, and are enveloped by dunites of variable thickness, enclosed in metaharzburgites, and occasionally crosscut by pyroxenite, gabbro and dolerite dykes (Escayola et al. 2004; Proenza et al., 2008).

3. Analytical methods

Selected chromite grains that preserved the textural varieties described by Colás et al. (2016) were imaged using a scanning electron microscope (SEM) model JEOL SM 6400 SEM equipped with energy-dispersive spectrometry and back-scattered electron (BSE) detectors available at the Universidad de Zaragoza (Spain). Additional BSE images of chromites were performed with a Swift-ED Hitachi TM-1000 Environmental Scanning Electron Microscope (ESEM) available at the Laboratorio de Petrografía y Microtermometría of the Instituto de Geofísica, Universidad Nacional Autónoma de México (Mexico).

Major-element composition of the different phases in the textural varieties of chromite has been analysed using a CAMECA SX-100 electron microprobe (EMPA) available at the Geochemical Analysis Unit of the CCFS/GEMOC, Macquarie University (Australia) under the following working conditions: 20 kV acceleration voltage, 20 nA beam current and 2-3 µm beam size. Peak counting times were 10 s for Cr, Fe, Ti, V, Mn, Zn, and Ni, 20 s for Mg, and 30 s for Al. Natural and synthetic standards used were MgO (Mg), olivine (Si), kyanite (Al), sphalerite (Zn), magnetite (Fe), rhodonite (Mn), rutile (Ti) and pure metals for Ni, Cr and V. Matrix correction were applied followed the method by Pouchou and Pichoir (1991). Additional chromite analyses were performed using a CAMECA SX-50 EMPA instrument belonging to the Centres Científics i Tecnològics of the Universitat de Barcelona (CCiTUB, Spain). The analytical conditions were 20 kV accelerating voltage, 20 nÅ beam current, 3 μm beam diameter, and counting time of 20 s for Mg, Al, Si, Ti, and Cr, and 30 s for V, Mn, Fe, Ni, Zn and Co. Calibration standards were natural and synthetic materials: periclase (Mg), corundum (Al), diopside (Si), rutile (Ti), Cr2O3 (Cr), rhodonite (Mn), magnetite (Fe), NiO (Ni), sphalerite (Zn) and pure metals for V and Co. The correction procedure XPP (Pouchou and Pichoir, 1991) was used to convert specimen intensity ratios into concentrations. The chemical data for chromite were stoichiometrically recalculated in order to distinguish FeO from Fe2O3 according to the procedure described by Droop (1987).

The quantitative analyses of silicates were carried out using a JEOL JXA-8230 EMPA instrument available at the CCiTUB (Spain) under the following working conditions: 20 kV acceleration voltage, 20 nA beam current, 2 µm beam diameter and counting time of 10 s per element. The standards used are albite (Na), periclase (Mg), corundum (Al), diopside (Si), wollastonite (Ca), rutile (Ti), Cr2O3 (Cr), rhodonite (Mn), magnetite (Fe), and sphalerite (Zn). The correction procedure XPP (Pouchou and Pichoir, 1991) was used to convert specimen intensity ratios into concentrations. Additional silicates were analyzed using a JEOL JXA-8900R EPMA instrument available at the Laboratorio Universitario de Petrología of the Instituto de Geofísica, Universidad Nacional Autónoma de México (Mexico). The analytical conditions were 20 kV accelerating voltage, 20 nÅ beam current, and 1 μm beam diameter. Peak counting times were 40 s for Al, Ca, Cr, Fe, Mg, Mn, Ni, Si and Ti, and 10 s for Na and K. ZAF corrections were applied online. The calibration was performed using natural and synthetic standards: albite (Na), diopside (Mg), kaesurtite (Al), diopside (Si, Ca and Cr), ilmenite (Ti and Fe), olivine (Ni and Mn). All EMPA data of chromite and silicates are listed in Appendices 1 and 2, respectively.

Minor- and trace-element compositions of the different phases in chromite grains were analysed using a New Wave UP 266 laser system connected to an Agilent 7500cs ICP-MS available at the Geochemical Analysis Unit of the CCFS/GEMOC, Macquarie University (Australia), following the method described by Colás et al. (2016). For this study, the LA-ICP-MS analyses of chromite were focused on the 45Sc, 47Ti, 51V, 55Mn, 59Co, 60Ni, 66Zn and 69Ga masses, and are listed in Appendix 3.

The thermodynamic modelling of phase relations during the alteration of chromite was performed using the Perple_X 6.8.3 software (Connolly, 2009), and the internally consistent thermodynamic database extended to include Cr-bearing phases (Holland and Powell, 1998, revised in 2002; cr_hp02ver.dat). The components considered to perform the pseudosection calculations of chromitite sample were computed in the close system FeO-Fe2O3-Cr2O3-MgO-Al2O3-CaO-SiO2-H2O (FCrMACaSH), and the solid solutions were Cr-spinel (Colás et al., 2019), antigorite (Padrón-Navarta et al., 2013), magnetite (Sack and Ghiorso, 1991b), olivine, chlorite, orthopyroxene and clinopyroxene (Holland and Powell, 1998). All other minerals involved in the calculations are pure phases. The Fe2O3 component in the textural varieties of chromite was considered as the magnetite solid solution phases, while the Cr-bearing chlorite was not considered because of the lack of experimental data on the mixing parameters for Al and Cr in this mineral.

4. Petrography and chemistry of chromitite orebodies

4.1. Chromite

The chromitite bodies consist of massive (>80 vol.% chromite), semi-massive (50-80 vol.% chromite), and to a lesser extent, disseminated (30-50 vol.% chromite) textures. These chromitites were intensely modified by metamorphism, which has produced the three textural varieties of chromites defined by Colás et al. (2016) (Table 1; Figure 3). Type I chromite, without exsolved phases and optically homogeneous (Figure 3a), shows a trend of increase of Cr# [Cr/(Cr+Al) atomic ratio] coeval with a decrease of Mg# [Mg/(Mg+Fe2+) atomic ratio] displaced at lower Mg# from massive (Mg# = 0.52-0.68 and Cr# = 0.47-0.72), semi-massive (Mg# = 0.48-0.55 and Cr# = 0.60-0.73) to disseminated (Mg# = 0.42-0.52 and Cr# = 0.55-0.63) chromitites (Table 1; Figure 4a to 4c). The Fe3+/(Fe3++Fe2+) ratio varies from 0.43 to 0.54 in Type I chromite from massive and disseminated chromitites, but is lower in Type I chromite from semi-massive chromitites (Fe3+/(Fe3++Fe2+) = 0.24-0.27) (Table 1; Figure 4a to 4c). Type II chromite shows a magnetite-rich phase (Mg# = 0.21-0.23, Cr# = 0.85-0.87, and Fe3+/(Fe3++Fe2+) = 0.62-0.63) that forms irregular blebs randomly distributed along the rims or linear strings, and fine lamellae with apparent crystallographic control hosted in a spinel-rich phase (Mg# = 0.56-0.63, Cr# = 0.50-0.54, and Fe3+/(Fe3++Fe2+) = 0.43-0.52) (Table 1; Figures 3c and 4d to 4f). Type III chromite, with symplectitic texture, is composed of variable proportions of magnetite-rich (Mg# = 0.29-0.33, Cr# = 0.76-0.79, and Fe3+/(Fe3++Fe2+) = 0.62-0.64) and spinel-rich (Mg# = 0.64-0.73, Cr# = 0.41-0.43, and Fe3+/(Fe3++Fe2+) = 0.40-0.54) phases (Table 1; Figures 3d and 4d to 4f). This chromite prior to exsolution have similar Mg# (0.44-0.50) and Cr# (0.54-0.59), but higher Fe3+/(Fe3++ Fe2+) (0.60-0.61) than Type I chromite from disseminated chromitites (Mg# = 0.42-0.52, Cr# = 0.55-0.63, and Fe3+/(Fe3++Fe2+) = 0.43-0.48) (Table 1; Figures 4a to 4c).

Figure 3 Backscattered-electron (BSE) images of the different textural varieties of chromites identified in Los Congos and Los Guanacos chromitite bodies. Type I chromite in massive (a) and semi-massive chromitites (b) with relics of clinopyroxene; Type II chromite from Los Congos (c) and Type III chromite from Los Guanacos (d). Abbreviations: Atg: antigorite, Cb: carbonates, Chr: chromite, Cpx: clinopyroxene, Mag: magnetite, Spl: spinel (Whitney and Evans, 2010). 

Figure 4 Compositional variations of chromite grains in the studied chromitites from Los Congos and Los Guanacos in terms of Mg# [Mg/(Mg+Fe2+) atomic ratio] versus Cr# [Cr/(Cr+Al) atomic ratio] (a and d) and Fe3+/(Fe2++Fe3+) ratio (b and e), and Al-Cr-Fe3+ compositions (c and f). Legend provided as inset in the figure. Dashed lines in (a and d) denote the composition of olivine in equilibrium with chromite at a nominal temperature of 1,200 ºC (Dick and Bullen, 1984). Shaded fields in plots are the composition of chromite from Los Congos and Los Guanacos chromitites reported by Escayola et al. (2004) and Proenza et al. (2008)

Table 1 Characterization of the chromitite samples investigated in this study. 

Chromite variety Locality Sample Chromitite body Chromite phase Chemical variations
Texture Silicate matrix Cr#at Mg#at Fe3+ / (Fe3++Fe3+)
Type I Los Congos M-25 Massive Atg (10 vol%) Chromite-rich 0.47-0.58 0.61-0.68 0.44-0.54
Cpx (10 vol%)
M-17 Atg (15 vol%) 0.62-0.72 0.52-0.57 0.44-0.48
Cpx (3 vol%)
Clc (2 vol%) 0.60-0.73 0.48-0.55 0.24-0.27
Los Guanacos 3317 Semi-massive Atg (35 vol%)
Cpx, (4 vol%) 0.55-0.63 0.42-0.52 0.43-0.48
Clc (4 vol%)
2260a Disseminated Atg (55 vol%)
Cpx (7 vol%)
Clc (5 vol%)
Type II Los Congos M-27 Disseminated Atg (50-70 vol%) Spinel-rich 0.50-0.54 0.56-0.63 0.43-0.52
Cpx, (4 vol%) Magnetite-rich 0.85-0.87 0.21-0.23 0.62-0.63
Type III Los Guanacos 2226 Massive Atg (< 20 vol%) Spinel-rich 0.41-0.43 0.64-0.73 0.40-0.54
Magnetite-rich 0.76-0.79 0.29-0.33 0.62-0.64
Chromite-rich(a) 0.54-0.59 0.44-0.50 0.60-0.61

Note: Mineral abbreviations after Whitney and Evans (2010).

*a) Composition calculated using the proportion of each phase in exsolved chromites according to Colás et al. (2016).

Type I chromite is found in clinopyroxene-bearing massive, semi-massive and disseminated samples from Los Congos and Los Guanacos massifs, whereas Type II chromite is preserved exclusively in clinopyroxene-bearing disseminated samples from Los Congos, and Type III chromite occurs in clinopyroxene-free massive chromitites from Los Guanacos (Table 1).

The three varieties of chromite are made up by subhedral and less frequently anhedral crystals (from 0.2 to 1 cm across) with rounded shapes, and have a fracture network of variable density (Figure 3); these fractures are often filled with secondary silicates (i.e., antigorite and chlorite), and less frequently with carbonates (Figure 3c). No primary olivine was observed in the chromitites, whereas antigorite and chlorite forms the interstitial matrix between chromite grains (Figure 3). Clinopyroxene are also found intergranular to Type I and Type II chromites (Figures 3a and 3b). Small inclusions of these silicate minerals are scattered within chromite grains.

In situ LA-ICP-MS analyses of Type I chromite in massive chromitites from Los Congos and Los Guanacos show variable albeit similar contents of Ga (10.32-32.70 ppm), Ti (615-1354 ppm), Zn (1282-2853 ppm), and Mn (2890-8215 ppm), higher contents of Sc (1.5-10.07 ppm) and Ni (1012-2386 ppm), and lower contents of Co (287-370 ppm) and V (657-1007 ppm) than those in semi-massive chromitites from Los Guanacos (Ga = 18.96-27.46 ppm, Ti = 746-1449 ppm, Zn = 1974-2508 ppm, Mn = 2540-3172 ppm, Sc = 0.33-1.23 ppm, Ni = 634-851 ppm, Co = 372-397 ppm, V = 1118-1255 ppm) (Figure 5a to 5b). Spinel-rich phase of Type III chromite in massive chromitites from Los Guanacos are enriched in Ga (26.95-30.13 ppm), Co (616-699 ppm) and Zn (5118-6024 ppm), but depleted in Sc (1.03-2.02 ppm), V (598-836 ppm), Ti (302-526 ppm), Mn (3244-4197 ppm) and Ni (1781-2877 ppm) than the magnetite-rich phase (Ga = 9.42-14.88 ppm, Co = 280-407 ppm, Zn = 846-1082 ppm, Sc = 2.19-4.67 ppm, V = 830-1282 ppm, Ti = 876-1378 ppm, Mn = 3097-5083 ppm, Ni = 3700-5812 ppm) (Figure 5c and 5d). In situ analyses of Type II chromite from Los Congos were excluded because the beam size of LA-ICP-MS (~30-50 μm) is larger than the size of the exsolved phases (see Figure 3c).

4.2. Silicate minerals

Antigorite is present in Type I, Type II and Type III chromites (Table 1), but its composition varies in the different ultramafic massifs. Antigorite crystals in the chromitite bodies from Los Congos (n= 9) vary within the following ranges: 42.42-44.66 wt.% SiO2, 36.04-39.33 wt.% MgO, 3.01-3.99 wt.% Al2O3, 1.48-3.19 wt.% FeO, and 0.68-1.39 wt.% Cr2O3. Antigorite from Los Guanacos (n= 12) has relatively higher MgO (37.24-41.12 wt.%) and FeO (1.77-3.30 wt.%), but relatively lower SiO2 (39.71-43.16 wt.%), Al2O3 (up to 0.71 wt.%), and Cr2O3 (0.03-0.26 wt.%) than those from Los Congos (Appendix 2).

Chlorite (n= 8) associated with Type I chromite in chromitites from Los Guanacos (Table 1) have narrowly variable SiO2 (29.01-31.87 wt.%), Al2O3 (17.45-18.36 wt.%), MgO (32.78-34.27 wt.%), and FeO (1.83-2.63 wt.%) (Appendix 2). All the analysed grains contain significant amounts of Cr2O3 (1.94-3.95 wt.%), but their low Fe/(Fe+Mg) ratios (up to 0.04) overlap the compositional field of clinochlore defined by Hey (1954) (Appendix 2).

Clinopyroxene (n= 26) identified in Type I and Type II chromites (Table 1) has a Mg-rich augite composition (Wo28-29 En67-69 Fs3-5) (Appendix 2), but its composition varies in different types of chromite. Clinopyroxene grains which are associated with Type I chromite in chromitites from Los Congos and Los Guanacos (Table 1) show similar Mg# (0.94-0.96), SiO2 (55.29-57.19 wt.%), Al2O3 (2.19-4.06 wt.%) and CaO (12.96-13.89 wt.%), with relatively higher Na2O (0.16-0.36 wt.%) and Cr2O3 (0.55-1.09 wt.%), and lower TiO2 (0.10-0.25 wt.%) and MnO (0.02-0.13 wt.%) than those from Type II chromites in Los Congos (Mg# = 0.93-0.94, SiO2 = 54.53-56.55 wt.%, Al2O3 = 3.50-4.96 wt.%, CaO = 13.22-13.38 wt.%, Na2O = 0.13-0.26 wt.%, Cr2O3 = 0.43-0.72 wt.%, TiO2 = 0.22-0.33 wt.%, and MnO = 0.13-0.15 wt.%) (Appendix 2).

5. Discussion

5.1. Retrograde metamorphic fingerprints in chromitites

Type III chromite prior to exsolution (Mg# = 0.44-0.50) and Type I chromites in disseminated chromitites have lower Mg# (0.42-0.52) with respect to those in massive chromitites (Mg# = 0.61-0.68), expanding between and parallel to the Fo85 and Fo93 contours (Table 1; Figure 4). This trend is similar to that described in non-metamorphosed chromitites from ophiolites elsewhere, where accessory chromites hosted in olivine are enriched in FeO and the olivine interstitial to chromite in chromitite bodies is enriched in MgO (Leblanc and Nicolas, 1992). It could be attributed to the Mg2+↔Fe2+ exchange between chromite and olivine at high temperatures (i.e., 1000-900 °C) during postmagmatic cooling (Irvine, 1967).Thus, a decrease of Mg# at relatively constant Cr# should be expected in the chromite grains from chromitites with lower chromite/silicate ratios. However, this hypothesis is not valid for Type I and Type III chromites prior to exsolution from Los Congos and Los Guanacos because the decrease of Mg# is associated with an increase of Cr# (from 0.47 to 0.73 in Type I chromite and from 0.54 to 0.59 in Type III chromite prior to exsolution) (Table 1; Figure 4a and 4c).

The trend of Cr2O3 and FeO gain coupled with the MgO and Al2O3 loss showed in Type I and Type III chromites prior to exsolution (Table 1; Figure 4a and 4d) is similar to those reported in chromitites from metamorphosed ophiolites elsewhere (e.g., Gervilla et al., 2012; Prabhakar and Bhattacharya 2013; Ahmed and Surour, 2016; González-Jiménez et al., 2016; Kapsiotis et al., 2018; Yu et al., 2019). These chemical variations are usually characteristic of Fe2+-rich porous chromite rims or grains formed by the reaction of magmatic chromite with olivine and/or pyroxene during the retrograde hydrous metamorphism, in presence of SiO2-rich and MgO-poor fluids derived from the host ultramafic rocks (e.g., Bach et al., 2006; Frost et al., 2013; Majumdar et al., 2016; Colás et al., 2017). This hydration process produced the mass loss of primary chromite and the preferential partitioning of MgO and Al2O3 towards chlorite that crystallized inside the pores of Fe2+-rich porous chromite, and also the formation of antigorite in the matrix (e.g., Gervilla et al., 2012; Barra et al., 2014; González-Jiménez et al., 2016; Colás et al., 2019). Interestingly, Type I chromite in disseminated chromitites is significantly more enriched in Co and V and depleted in Ni than chromite in massive chromitites (Figure 5a and 5b). This suggests that a greater element mobility could take place as a result of highly effectiveness in chromite grains with lowest chromite/silicate and high fluid/rock ratios (i.e. semi-massive chromites) (Loferski, 1986; Candia and Gaspar, 1997; Proenza et al. 1999; Merlini et al. 2009; Barra et al. 2014; Colás et al. 2017).

Figure 5 Box chart diagrams illustrating the content of divalent (a and c), trivalent and tetravalent (b and d) minor and trace elements in the different textural varieties of chromite identified in Los Congos and Los Guanacos chromitites. Elements arranged according to Colás et al. (2019)

In contrast, the high contents in Fe2O3 in the Type I and Type III chromites prior to exsolution from Los Congos and Los Guanacos [Fe3+/(Fe3++Fe2+) from 0.24 to 0.54 in Type I, and from 0.60 to 0.61 in Type III chromite prior to exsolution] (Table 1; Figure 4) are usually associated with the modification of Fe2+-rich porous chromite to Fe3+-rich non-porous chromite during the retrograde hydrous metamorphism. This process is a consequence of the exhaustion of olivine and pyroxene from the chromitites and host ultramafic rocks, and the progressive increase of ʄO2 and SiO2 in the fluid (i.e., more oxidizing conditions), which promoted the oxidation of Fe2+ and the subsequent increase of Fe3+ in the system (e.g., Alt and Shanks, 1998; Bach et al., 2004, 2006; Alt et al., 2007). These fluids would have reacted with Fe2+-rich porous chromite through the pre-existing pore network, thus dissolving chlorite and precipitating magnetite in the remaining porosity (e.g., Satsukawa et al., 2015; Colás et al., 2019; Gervilla et al., 2019). The diffusion of Fe3+ and Fe2+ through pores resulted in the development of Fe3+-rich non-porous chromite, obliterating the igneous chemical signature of the pre-existing chromite (e.g., Gervilla et al., 2012; Barra et al., 2014; Colás et al., 2019; Yu et al, 2019). In this context, the lowest Fe3+/(Fe3++ Fe2+) ratios (0.24-0.27) showed by Type I chromite in semi-massive chromitites and the highest Fe3+/(Fe3++ Fe2+) ratios (0.60-0.61) displayed by Type III chromite prior to exsolution (Table 1; Figure 4) suggest an uneven efficiency of the alteration process, which could be significantly affected by the presence of secondary permeability in the chromitites and/or by variable fluid/rock ratios (e.g., Loferski, 1986; Candia and Gaspar, 1997; Colás et al., 2017).

5.2. Prograde metamorphic fingerprints in chromitites

The absence of Fe2+-rich porous chromite and/or Fe3+-rich non-porous chromite rims in Type I chromites and the presence of exsolved textures in Type III chromites (Figure 3) suggest a change in the metamorphic conditions. Type I and Type III chromites prior to exsolution have albeit similar Mg# (from 0.42 to 0.68 in Type I, and from 0.44 to 0.50 in Type III chromite prior to exsolution) and Cr# (from 0.47 to 0.73 in Type I, and from 0.54 to 0.59 in Type III chromite prior to exsolution), but higher (Fe3+/(Fe3++ Fe2+) ratios (from 0.24 to 0.54 in Type I, and from 0.60 to 0.61 in Type III chromite prior to exsolution) than primary chromite reported in Los Guanacos by Proenza et al. (2008) (Cr# = 0.48-0.56, Mg# = 0.61-0.75, and Fe3+/(Fe3++ Fe2+) = 0.30-0.36; Figure 4). According to González-Jiménez et al. (2015), the dehydration of previously hydrated chromitite bodies during the thermal prograde metamorphism may produce the reaction of Fe2+-rich porous and/or Fe3+-rich non-porous chromite with antigorite and chlorite from the pores and/or matrix. This process formed an optically homogeneous chromite with a composition close to igneous chromite -i.e., a chromite with lower Cr2O3 but higher MgO, Al2O3 and Fe2O3 than that formed by the retrograde hydrous metamorphism- in equilibrium with Mg-rich olivine and/or pyroxene (e.g., Padrón-Navarta et al. 2010, 2013).

It is worth noting that Type I chromites from Los Congos and Los Guanacos shows patterns of minor and trace elements with lower Ga and higher Co, Zn and Mn than those chromites from non-metamorphosed ophiolitic chromitites (i.e., chromites form back-arc and oceanic suprasubduction zone (SSZ) mantle; Figure 6a to 6c). This suggests that the distribution of minor and trace elements in Type I chromite was disturbed significantly by the formation of Fe3+-rich non-porous chromite during retrograde hydrous metamorphism, and the subsequent re-equilibrium between those hydrated chromites and silicates during the prograde metamorphism. This is consistent with the fact that the enrichment of Co, Zn and Mn coupled with the depletion of Ga in chromite was interpreted as a result of the formation of chlorite and antigorite by the hydration of chromite during the retrograde metamorphism (Colás et al., 2014). This hypothesis is also supported by (i) the absence of Fe2+-rich porous and/or Fe3+-rich non-porous chromite grains and/or rims in Type I chromites, and (ii) with the fact that these chromite grains have albeit similar distribution of minor and trace elements than Fe3+-rich non-porous chromite in metamorphosed ophiolitic chromitites from the Eastern Rhodopes in Bulgaria (Figure 6d; Colás et al., 2014; González-Jiménez et al., 2015, 2018).

Figure 6 MORB-normalized minor and trace element distribution in Type I chromite grains from Los Congos and Los Guanacos chromitites (a and b) compared with high-Al non-metamorphosed chromitites (c) and with metamorphosed chromitites (d). MORB normalizing values are from Pagé and Barnes (2009). Data sources for high-Al chromites from suprasubduction zone (SSZ) mantle-hosted podiform chromitites: Sartohay, China (Zhou et al., 2014); Islahiya, Doğanşehir (Akmaz et al., 2014) and AntalyaIsparta (Uysal et al., 2016), Turkey; Mercedita (Colás et al., 2014) and Mayarí (Zhou et al., 2014), Cuba. Data source for back arc chromitites is from Coto, Philippines (Yao, 1999), and from Sagua de Tánamo, Cuba (González-Jiménez et al., 2015); and that of from metamorphic chromitites is from Golyamo Kamenyane (Colás et al, 2014) and Chernichevo (González-Jiménez et al. 2018), Bulgaria. 

Additionally, Type I chromite in massive chromitites exhibits similar Ga, Ti, Zn, and Mn, higher Sc and Ni, and lower Co and V than that chromite in semi-massive chromitites (Table 1; Figure 5a and 5b). This is consistent with the fact (i) the dehydration of previously hydrated chromitites forms Mg-rich olivine and/or pyroxene with lower Co and higher Ni than Type I chromite (e.g., Zhang et al., 2018; Su et al., 2019), and (ii) the lowest contents of Sc and Fe2O3 [Fe3+/(Fe3++ Fe2+) = 0.24-0.27] (Table 1; Figure 4b and 4c) showed by Type I chromite in semi-massive chromitites is due to the preference of Sc for Fe3+-rich chromites (Wijbrans et al., 2015). Hence, these observations allow us to suggest that the major, minor and trace element composition of Type I and Type III chromites prior to exsolution from Los Congos and Los Guanacos (Figure 4a to 4f) was likely modified by the hydration of primary chromite during the retrograde hydrous metamorphism, and their subsequent dehydration during the prograde metamorphism.

5.3. Temperature conditions of chromite alteration

Recent studies conducted by González-Jiménez et al. (2015, 2016) and Colás et al. (2017) reproduced the phase relations and temperature conditions of the alteration of chromite during the retrograde hydrous metamorphism in the system Cr2O3-MgO-FeO-Al2O3-SiO2-H2O (CrMFASH). However, this thermodynamic approach has limitations to model Fe3+-rich non-porous chromite as Type I, Type II and Type III chromites prior to exsolution from Los Congos and Los Guanacos because the solution model used for Cr-spinel does not include a calibration for the magnetite (Fe3O4) end-member with an inverse spinel structure. Recent refinements of this thermodynamic modelling (González-Jiménez et al., 2018; Colás et al., 2019) now consider that the Fe2O3 content in Fe3+-rich non-porous chromite can be modelled as a magnetite component in the FeO-Fe2O3-MgO-Al2O3-SiO2-H2O (FMASH) system, thus allowing a better constrain the temperature of formation of Fe3+-rich non-porous chromite in chromitites from Los Congos and Los Guanacos.

Such an approach allowed us to construct a pseudosection for Type I chromite, contoured for Cr# and Mg#, in the fluid-saturated FeO-Fe2O3-Cr2O3-MgO-Al2O3-CaO-SiO2-H2O (FCrMACaSH) system (Figure 7). In our computations, we have used an initial assemblage of chromitite bulk composition of semi-massive (57:35:04:04) molar mix of chromite, antigorite, clinopyroxene and chlorite (Table 1). The composition of chromite is the Type I chromite with the lowest Fe3+/(Fe2++Fe3+) ratio [(Mg0.48Fe0.52)(Cr0.72Al0.28Fe0.08)O4], and that of antigorite [(Mg0.48Fe0.52)(Cr0.73Al0.27Fe0.08)O4], clinopyroxene [(Ca0.5Mg1.44Fe0.06)Si2O6] and chlorite [(Mg4.68Fe0.16)Al2Si3(OH)8] is the average composition of those silicates in semi-massive chromitites including Type I chromite (Figure 4a; Table 1; Appendices 1 and 2).

Our modelling shows that the maximum slope of Cr# isopleths in chromite is located between ca. 800 ºC at 20 kbar and 500 ºC at 1 kbar (Figure 7a and 7b), predicting that under water-saturated conditions, primary chromite in semi-massive chromitites is not stable with olivine and pyroxene below 800 ºC. At these conditions, the stable assemblage is made up of chromite with higher Cr# and lower Mg# in equilibrium with chlorite, antigorite, brucite and magnetite (Figure 7a to 7c). The model also predicts that at the P-T conditions for ocean floor metamorphism (4 kbar and 300 °C; Escayola et al., 1996, 2004) estimated for the host ultramafic rocks at Los Congos and Los Guanacos, chromite with Cr# = 1.00 and Mg# = 0.25 in semi-massive chromitite should form (green circle-1 in Figure 7b and 7c). Such modelled values are in accordance with the composition of Fe3+-rich non-porous chromite in metamorphosed chromitites at Tehuitzingo, Loma Baya in southern Mexico (Proenza et al., 2004; González-Jiménez et al., 2015, 2017; Colás et al., 2019; Farré-de-Pablo et al., 2019), Tapo in Peru (Colás et al., 2017), and La Cabaña ultramafic massifs in Chile (Barra et al., 2014; González-Jiménez et al., 2016; Plissart et al., 2019).

Figure 7 P-T pseudosection (a) and isopleths of Cr# (b) and Mg# (c) in chromite and Mg# (d) in olivine calculated for a semi-massive chromitite (57:35:04:04 chromite:antigorite:clinopyroxene:chlorite molar proportions) in the fluid-saturated FCrMACaSH system. Green circles show the metamorphic conditions obtained by Escayola et al. (1996, 2004) in the ultramafic host rocks at Los Congos and Los Guanacos massifs. Orange rectangle show the temperature conditions estimated by Colás et al. (2016) for the exsolution of Type II and Type III chromites and the pressure conditions obtained by Rapela et al. (1998) and Martino et al. (2010) in the associated granulites. Abbreviations: Atg: antigorite, Ath: antophillyte, Chl: chlorite, Chr: chromite, Cpx: clinopyroxene, Hem: hematite, Mag: magnetite, Ol: olivine, Opx: orthopyroxene (Whitney and Evans, 2010). 

The occurrence of brucite along with chlorite and antigorite below 500 ºC and 20 kbar further support that ocean floor metamorphism took place under SiO2-poor water-saturated conditions (Colás et al., 2017). Furthermore, the predicted amount of magnetite is <2.58 vol.%, which can be explained as a result of olivine runoff and the oxidation of Fe2+ to Fe3+ in the solutions (e.g., Bach et al. 2004; Alt et al. 2007). This oxidizing fluids circulated through the network of pores in the Fe2+-rich porous chromite, thus dissolving chlorite and diffusing Fe2+ and Fe3+ into the chromite lattice and converts it to Fe3+-rich non-porous chromite (e.g., Gervilla et al., 2012; Barra et al., 2014; Colás et al., 2014, 2017, 2019; González-Jiménez et al., 2016, 2018).

However, Type I chromite in semi-massive chromitites have lower Cr# (0.60-0.73) and higher Mg# (0.48-0.55) and Fe3+/(Fe3++Fe3+) (0.24-0.27) than modelled Fe3+-rich non-porous chromite (Figure 4a to 4c), which suggests a change in the metamorphic conditions (Figure 7a). According to Figure 7a to 7c, an increase in Al2O3, MgO and Fe2O3 could be related to the breakdown of chlorite and antigorite if a prograde metamorphism affects the chromitite bodies. Hence, at the P-T conditions of the metamorphic peak (10 kbar and 800 °C as of Escayola et al., 1996, 2004) (green circle-2 in Figure 7) Fe3+-rich non-porous chromite reacts with chlorite+antigorite+brucite in the matrix. Such reaction of dehydration leads to the formation of homogeneous Fe3+-rich chromite with Cr# = 0.65, Mg# = 0.57 (i.e., Type I chromite), olivine, orthopyroxene and clinopyroxene (Figure 7a to 7c). Clinopyroxene is very rare in non-metamorphosed ophiolitic chromitites, although diopside is found in Al-rich ophiolitic chromitites from the Mayarí-Baracoa Ophiolitic Belt in Cuba (Proenza et al., 1998, 1999; Pujol-Solà et al., 2018), which are spatially associated with gabbro dikes and sills. However, our thermodynamic model also predicts that olivine with Fo93 (Figure 7d) and Mg-rich clinopyroxene (the predicted Mg# is 0.97; Figure 7a) were in equilibrium with a chromite with the composition of Type I chromite in semi-massive chromitites (Figures 4a to 4c and 7).

Significantly, the presence of exsolved textures in Type II and Type III chromites indicate a late cooling from granulite facies metamorphism to lower P-T conditions (Figures 3c, 3d and 7a). Contrary to the petrographic observations, our thermodynamic model cannot predict the exsolution of homogeneous Fe3+-rich non-porous chromite to spinel-rich and magnetite-rich phases in Type II and Type III chromites. However, at the minimum temperature estimated for the exsolution of such chromites (ca. 600 ºC; Colás et al., 2016) and the lowest pressures recorded in the associated granulites (from 4 ± 0.5 to 6.2 ± 1 kbar; Otamendi et al., 1999, 2004, 2005; Rapela et al., 1998; Martino et al., 2010) (orange rectangle-3 in Figure 7), chromite with higher Cr# (0.94-0.98) and lower Mg# (0.36-0.38) than Type I chromite (Figure 7b and 7c) is in equilibrium with olivine, clinopyroxene, chlorite and antophillyte (Figure 7a). The presence of antigorite in the studied chromitites (Figure 3) vs. the predicted occurrence of olivine, clinopyroxene and chlorite by means of thermodynamic modelling (Figure 7), suggests that a final hydration of silicates did not fully progress at amphibolite facies conditions. Further, anthophyllite is not present in the studied chromitite samples (Figure 3), but it was described in ultramafic host rocks to the chromitite bodies at Los Guanacos (Escayola et al., 1996, 2004). Such occurrence can be explained as a consequence of higher rates of reaction between the infiltrating fluids and silicates in chromitites than between these fluids and the host ultramafic rocks. Therefore, these observations suggest (i) Type I, Type II and Type III chromites experienced high-T metamorphism at granulite facies condition after the formation of Fe3+-rich non-porous chromite by the hydrous metamorphic reaction that generated Fe2+-rich porous chromite and magnetite above 650-800 ºC (Figure 7a to 7d; Colás et al., 2019); and (ii) the ultimate mineral assemblage preserved in Type I chromite, as well as the exsolution of Type II and Type III chromites started once the ultramafic body already entered within the P-T field of amphibolite facies (Figure 7).

5.4. Formation of exsolved chromites in chromitites

Colás et al. (2016) suggested that the variety of textures in Los Congos and Los Guanacos chromitites is mainly controlled by the Cr2O3 and Fe2O3 content in chromite (Table 1; Figure 4a to 4f). Under the assumption that Type II and Type III chromites had a similar composition prior to exsolution, such a process could be represented on an ideal phase diagram of chromite (Figure 8). In this diagram, the composition in major elements of Type I chromite and spinel-rich and magnetite-rich phases in Type II and Type III chromites may be represented by an hypothetical solvus on the (Mg0.5Fe2+ 0.5)Cr2O4-MgAl2O4-(Mg0.5Fe2+ 0.5)Fe3+ 2O4 plane, included in the Cr-spinel prism (Figure 8a and 8b) (Tamura and Arai, 2004). As shown in Figure 8b to 8d, the extension of the solvus is more restricted in chromites with high Cr2O3, than in those with low Cr2O3. Therefore, Type I chromite with higher Cr2O3 but lower Fe2O3 contents (Cr# = 0.47-0.73 and Fe3+/(Fe2 ++Fe3+) = 0.24-0.54) than Type II and Type III chromites (Cr# = 0.54-0.59 and Fe3+/(Fe2++Fe3+) = 0.60-0.61) (Table 1; Figure 4a to 4f), should be expected to plot out of the solvus at >600 ºC, which is the blocking temperature calculated by Colás et al. (2016) -i.e., the minimum possible temperature for exsolution (Figure 8b-c). However, Type II and Type III chromites prior to exsolution (i.e., 800 ºC, the metamorphic peak conditions estimated by Escayola et al., 1996, 2004) would be found in the miscibility gap during the cooling from granulite to amphibolite facies, as recorded in the host granulites (Escayola et al., 1996, 2004; Rapela et al., 1998; Otamendi et al., 1999, 2004, 2005; Martino et al., 2010).

In Figure 8d is also shown that Type III chromite prior to exsolution has, in a binary system, an intermediate composition of Fe2O3 (Fe3+/(Fe2++Fe3+) = 0.60-0.61; (Table 1 and Figure 4d to 4f), which lies inside the spinoid at the blocking temperature. Thus, the symplectitic texture in Type III chromite (Figure 3c) could be effectively formed by phase separation of spinel-rich and magnetite-rich phases into the spinoid, as a consequence of a continuous and slow exsolution process through time (e.g., Kingery et al., 1976; Tamura and Arai, 2004). This exsolution process also produced the enrichment in Co, Zn, Sc, and Ga in the spinel-rich phase and the enrichment in Mn, Ni, V and Ti in the magnetite-rich phase in Type III chromite (Figures 5a and 5b). We have assumed that the original composition of Type II chromite was analogue to Type III chromite prior to exsolution (Mg# = 0.44-0.50, Cr# = 0.54-0.59, and Fe3+/(Fe3++Fe2+ = 0.60-0.61; Figure 4a to 4f). This implies that Type II chromite should also plot inside the spinoid at the blocking temperature (Figure 8d). However, the presence of a magnetite-rich phase in Type II chromite as irregular blebs or forming very fine lamellae within the spinel-rich phase (Figure 3d) indicates a discontinuous and relatively fast exsolution process.

Figure 8 Schematic illustration for interpretation of the different textural varieties of chromite identified in Los Congos and Los Guanacos chromitites according to their composition. (a) Cr-spinel prism including the approximate plane for Type I, Type III and Type III chromite compositions. (b) Hypothetical solvus on the Cr-Al-Fe3+ plane calculated by Sack and Ghiorso (1991a). Al3+-Fe3+ planes that cut through the solvus of (b) at different high and low Cr3+ contents equivalent to Type I (c), Type II and Type III (d) chromite compositions (modified from Tamura and Arai, 2004). 

The random distribution of magnetite-rich phase blebs along the rims or forming linear strings in Type II chromite grains (Figure 3d) suggests that such blebs are due to a slow cooling, probably at high temperatures (i.e., the metamorphic peak conditions at 800 °C; Escayola et al., 1996, 2004) in which a relatively effective and fast intracrystalline diffusion of cations is favoured. However, the crystallographic control of the magnetite-rich phase lamellae implies that they could form at lower temperatures (i.e., the blocking temperature at ca. 600 ºC; Colás et al., 2016) because the intracrystalline diffusion of cations would be less efficient and slower, which would mean that exsolved phase could only concentrate along crystallographic planes. These two exsolution processes are analogue to those reported in chromites from the Chilas (Pakistan; Jan et al., 1992) and the Eastern Desert (Egypt; Ahmed et al., 2008) magmatic arcs, and from the Iwanai-dake peridotite complex (Japan; Tamura and Arai, 2004, 2005). Therefore, the different textures in Type I, Type II and Type III chromites in chromitite bodies from Los Congos and Los Guanacos are the consequence of: i) gradual variations in the Cr2O3 and Fe2O3 contents during the dehydration of previously hydrated chromitites by prograde metamorphism within the granulite facies, and ii) the cooling rates during the retrograde overprint within the amphibolite facies.

6. Conclusions

The observed textural varieties of chromite in Los Congos and Los Guanacos chromitites in the Eastern Pampean Ranges (north Argentina) were produced during a complex metamorphic evolution. The hydration of magmatic chromite in the course of the retrograde hydrous metamorphism resulted in the formation Fe3+-rich non-porous chromite, and the hydration of olivine and pyroxene to antigorite and chlorite in the matrix. A shift in metamorphic conditions to higher pressures and temperatures (i.e., prograde metamorphism) promoted the dehydration of Fe3+-rich non-porous chromite by its reaction with antigorite and chlorite. This process formed an optically homogeneous chromite with higher Fe2O3, FeO, Co, Zn and Mn but lower Ga than primary chromite by its equilibration with Mg-rich olivine and pyroxene. The later-stage cooling was highlighted by the hydration of Mg-rich silicates in Type I chromite and by the exsolution of Type II and Type III chromites at different cooling rates. A continuous and slow cooling developed symplectitic textures in Type III chromite, thus mobilizing Co, Zn, Sc, and Ga into the spinel-rich phase and Mn, Ni, V and Ti into the magnetite-rich phase. However, a discontinuous and relatively fast cooling produced the exsolution of irregular bleds and fine lamellae in Type II chromites. Thermodynamic calculations showed that the hydration of magmatic chromite to secondary Fe3+-rich non-porous chromite in equilibrium with chlorite, antigorite and brucite occurred below 500 ºC and 20 kbar. Whereas, the dehydration of those minerals forms Fe3+-rich homogeneous chromite and Mg-rich olivine and pyroxene in the matrix above 800 °C and 10 kbar. The subsequent hydration of silicates in Type I chromite and the exsolution of Type II and Type III chromites started at ~600 ºC. Such P-T framework is in agreement with the metamorphic pathway proposed for the evolution of the chromitite-bearing ultramafic rocks at Los Congos and Los Guanacos. This indicates that the prograde metamorphism within the granulite facies conditions exerted large compositional effects on the chromite grains that were previously hydrated during retrograde metamorphism. Therefore, the continent-continent collisional orogenies are the likeliest regional contexts to preserve the geochemical fingerprints of prograde metamorphism in the suprasubduction zone ophiolitic chromitites.

Acknowledgments

This research was supported by the research programs UNAM-PAPIIT (IA-101419) and Ciencia Básica of CONACYT (A1-S-14574). Thanks also to the Spanish research projects CGL2015-65824-P, CGL2014-55949-R, RTI2018-099157-A-I00, PID2019-105625RB-C21 and the Ramón y Cajal Fellowship RYC-2015-17596 granted by the Spanish Ministerio de Ciencia, Innovación y Universidades and MINECO. The analytical data were obtained using instrumentation funded by DEST Systemic Infrastructure Grants, ARC LIEF, NCRIS/AuScope, industry partners and Macquarie University. We thank to Carlos Linares (Laboratorio de Universitario de Petrología, UNAM, Mexico) and Dr Augusto A. Rodriguez (Laboratorio de Petrografía y Microtermometría del Instituto de Geofísica, UNAM, Mexico) for their help with the EMPA analyses on silicates and with the backscattered electron (BSE) images, respectively. We would also like to thank Qing Xiong and Sisir Mondal for their formal reviews. This is a contribution 1489 from the ARC Centre of Excellence for Core to Crust Fluid Systems (http://www.ccfs.mq.edu.au) and 1382 in the GEMOC Key Centre (http://www.gemoc.mq.edu.au), and is related to IGCP-662.

References

Ahmed, A.H., Helmy, H.M., Arai, S., Yoshikawa, M., 2008, Magmatic unmixing in spinel from late Precambrian concentrically-zoned mafic-ultramafic intrusions, Eastern Desert, Egypt: Lithos, 104, 1, 85-98. https://doi.org/10.1016/j.lithos.2007.11.009 [ Links ]

Ahmed, A.H., Surour, A.A., 2016, Fluid-related modifications of Cr-spinel and olivine from ophiolitic peridotites by contact metamorphism of granitic intrusions in the Ablah area, Saudi Arabia: Journal of Asian Earth Sciences, 122, 58-79. https://doi.org/10.1016/j.jseaes.2016.03.010 [ Links ]

Akmaz, R.M., Uysal, I., Saka, S., 2014, Compositional variations of chromite and solid inclusions in ophiolitic chromitites from the southeastern Turkey: Implications for chromitite genesis: Ore Geology Reviews, 58, 208-224. https://doi.org/10.1016/j.oregeorev.2013.11.007 [ Links ]

Alt, J.C., Shanks, W.C., 1998, Sulfur in serpentinized oceanic peridotites: Serpentinization processes and microbial sulfate reduction: Journal of Geophysical Research: Solid Earth, 103, B5, 9917-9929. [ Links ]

Alt, J.C., Shanks, W.C., Bach, W., Paulick, H., Garrido, C.J., and Beaudoin, G., 2007, Hydrothermal alteration and microbial sulfate reduction in peridotite and gabbro exposed by detachment faulting at the Mid-Atlantic Ridge, 15º20’N (ODP Leg 209): A sulfur and oxygen isotope study: Geochemistry, Geophysics, Geosystems, 8, 8, - Q08002. https://doi.org/10.1029/2007GC001617 [ Links ]

Arai, S., 1992, Chemistry of chromian spinel in volcanic rocks as a potential guide to magma chemistry: Mineralogical Magazine, 56, 383, 173-184. https://doi.org/10.1180/minmag.1992.056.383.04 [ Links ]

Arai, S., Miura, M., 2016, Formation and modification of chromitites in the mantle: Lithos, 264, 277-295. https://doi.org/10.1016/j.lithos.2016.08.039 [ Links ]

Bach, W., Garrido, C.J., Paulick, H., Harvey, J., Rosner, M., 2004, Seawater-peridotite interactions: First insights from ODP Leg 209, MAR 15°N: Geochemistry, Geophysics, Geosystems, 5, 9, - Q09F26. https://doi.org/10.1029/2004gc000744 [ Links ]

Bach, W., Paulick, H., Garrido, C.J., Ildefonse, B., Meurer, W.P., and Humphris, S.E., 2006, Unraveling the sequence of serpentinization reactions: petrography, mineral chemistry, and petrophysics of serpentinites from MAR 15°N (ODP Leg 209, Site 1274): Geophysical Research Letters, 33, 13, L13306. https://doi.org/10.1029/2006gl025681 [ Links ]

Barnes, S.J., Roeder, P.L., 2001, The range of spinel compositions in terrestrial mafic and ultramafic rocks: Journal of Petrology, 42, 12, 2279-2302. https://doi.org/10.1093/petrology/42.12.2279 [ Links ]

Barra, F., Gervilla, F., Hernández, E., Reich, M., Padrón-Navarta, J.A., González-Jiménez, J.M., 2014, Alteration patterns of chromian spinels from La Cabaña peridotite, south-central Chile: Mineralogy and Petrology, 108, 6, 819-836. https://doi.org/10.1007/s00710-014-0335-5 [ Links ]

Candia, M.A.F., Gaspar, J.C., 1997, Chromian spinels in metamorphosed ultramafic rocks from Mangabal I and II complexes, Goiás, Brazil: Mineralogy and Petrology, 60, 1, 27-40. https://doi.org/10.1007/bf01163133 [ Links ]

Castroviejo, R., Pereira, E., Rodrigues, J.F., Acosta, J., 2009, Pre-andean serpentinite-chromite orebodies in the Eastern Cordillera of Central Peru, Tarma province, in Williams, P., ed., Smart science for exploration and mining: proceedings of the 10th Biennial SGA Meeting: Townsville, Australia, Economic Geology Research Unit James Cook University, 927-929. [ Links ]

Colás, V., González-Jiménez, J.M., Griffin, W.L., Fanlo, I., Gervilla, F., O’Reilly, S.Y., Pearson, N.J., Kerestedjian, T., Proenza, J.A., 2014, Fingerprints of metamorphism in chromite: new insights from minor and trace elements: Chemical Geology, 389, 137-152. https://doi.org/10.1016/j.chemgeo.2014.10.001 [ Links ]

Colás, V., Padrón-Navarta, J.A., González-Jiménez, J.M., Griffin, W.L., Fanlo, I., O’Reilly, S.Y., Gervilla, F., Proenza, J.A., Pearson, N.J., Escayola, M.P., 2016, Compositional effects on the solubility of minor and trace elements in oxide spinel minerals: Insights from crystal-crystal partition coefficients in chromite exsolution: American Mineralogist, 101, 6, 1360-1372. https://doi.org/10.2138/am-2016-5611 [ Links ]

Colás, V., Padrón-Navarta, J.A., González-Jiménez, J.M., Fanlo, I., López Sánchez-Vizcaíno, V., Gervilla, F., Castroviejo, R., 2017, The role of silica in the hydrous metamorphism of chromite: Ore Geology Reviews, 90, 274-286. https://doi.org/10.1016/j.oregeorev.2017.02.025 [ Links ]

Colás, V., González-Jiménez, J.M., Camprubí, A., Proenza, J.A., Griffin, W.L., Fanlo, I., O’Reilly, S.Y., Gervilla, F., González-Partida, E., 2019, A reappraisal of the metamorphic history of the Tehuitzingo chromitite, Puebla state, Mexico: International Geology Review, 61, 14, 1706-1727. https://doi.org/10.1080/00206814.2018.1542633 [ Links ]

Collo, G., Astini, R.A., Cawood, P.A., Buchan, C., Pimentel, M., 2009, U-Pb detrital zircon ages and Sm-Nd isotopic features in low-grade metasedimentary rocks of the Famatina belt: implications for late Neoproterozoic-early Palaeozoic evolution of the proto-Andean margin of Gondwana: Journal of the Geological Society, 166, 2, 303-319. https://doi.org/10.1144/0016-76492008-051 [ Links ]

Connolly, J.A.D., 2009, The geodynamic equation of state: what and how: Geochemistry, Geophysics, Geosystems, 10, 10, Q10014. https://doi.org/10.1029/2009gc002540 [ Links ]

Dick, H.J.B., Bullen, T., 1984, Chromian spinel as a petrogenetic indicator in abyssal and alpine-type peridotites and spatially associated lavas: Contributions to mineralogy and petrology, 86, 1, 54-76. https://doi.org/10.1007/bf00373711t [ Links ]

Droop, G.T.R., 1987, A general equation for estimating Fe3+ concentrations in ferromagnesian silicates and oxides from microprobe analyses, using stoichiometric criteria: Mineralogical Magazine, 51, 361, 431-435. https://doi.org/10.1180/minmag.1987.051.361.10 [ Links ]

Escayola, M.P., Ramé, G., Kraemer, P.E., 1996, Caracterización y significado geotectónico de las fajas ultramáficas de las Sierras Pampeanas de Córdoba: XIII Congreso Geológico Argentino y III Congreso de Exploración de Hidrocarburos., Actas, Tomo III, 421-438. [ Links ]

Escayola, M.P., Proenza, J.A., Schalamuk, A., Cábana, C., 2004, La secuencia ofiolítica de la faja ultramáfica de Sierras Pampeanas de Córdoba, Argentina. in Pereira, E., Castroviejo, R., Ortíz, F., eds., Complejos ofiolíticos en Iberoamérica: guías de prospección para metales preciosos: Madrid, España, Proyecto XIII.1-CYTED, 133-155. [ Links ]

Escayola, M.P., Pimentel, M.M., Armstrong, R., 2007, Neoproterozoic backarc basin: Sensitive high-resolution ion microprobe U-Pb and Sm-Nd isotopic evidence from the Eastern Pampean Ranges, Argentina: Geology, 35, 6, 495-498. https://doi.org/10.1130/g23549a.1 [ Links ]

Farré-de-Pablo, J., Proenza, J.A., González-Jiménez, J.M., Garcia-Casco, A., Colás, V., Roqué-Rossell, J., Camprubí, A., Sánchez-Navas, A., 2019, A shallow origin for diamonds in ophiolitic chromitites: Geology, 47, 1, 75-78. https://doi.org/10.1130/g45640.1 [ Links ]

Frost, B.R., Evans, K.A., Swapp, S.M., Beard, J.S., and Mothersole, F.E., 2013, The process of serpentinization in dunite from New Caledonia: Lithos, 178, 24-39. https://doi.org/10.1016/j.lithos.2013.02.002 [ Links ]

Gervilla, F., Padrón-Navarta, J.A., Kerestedjian, T., Sergeeva, I., González-Jiménez, J.M., 2012, Formation of ferrian chromite in podiform chromitites from the Golyamo Kamenyane serpentinite, Eastern Rhodopes, SE Bulgaria: a two-stage process: Contributions to Mineralogy and Petrology, 164, 4, 643-657. https://doi.org/10.1007/s00410-012-0763-3 [ Links ]

Gervilla, F., Asta, M., Grolimund, D., Ferreira-Sánchez, D., Samson, V.A., Hunziker, D., Colas, V., González-Jiménez, J.M., Kerestedjian, T.N., Sergeeva, I., 2019, Diffusion pathways of Fe2+ and Fe3+ during the formation of ferrian chromite: a µXANES study: Contributions to Mineralogy and Petrology, 174, 8, 65. https://doi.org/10.1007/s00410-019-1605-3 [ Links ]

Geuna, S.E., Escosteguy, L.D., Miró, R., 2008, Palaeomagnetism of the Late Devonian-Early Carboniferous Achala Batholith, Córdoba, central Argentina: implications for the apparent polar wander path of Gondwana: Gondwana Research, 13, 2, 227-237. https://doi.org/10.1016/j.gr.2007.05.006 [ Links ]

González-Jiménez, J.M., Griffin, W.L., Proenza, J.A., Gervilla, F., O’Reilly, S.Y., Akbulut, M., Pearson, N.J., Arai, S., 2014, Chromitites in ophiolites: how, where, when, why? Part II. The crystallization of chromitites: Lithos, 189, 140-158. https://doi.org/10.1016/j.lithos.2013.11.017 [ Links ]

González-Jiménez, J.M., Reich, M., Camprubí, A., Gervilla, F., Griffin, W.L., Colás, V., O’Reilly, S.Y., Proenza, J.A., Pearson, N.J., Centeno-García, E., 2015, Thermal metamorphism of mantle chromites and the stability of noble-metal nanoparticles: Contributions to Mineralogy and Petrology, 170, 2, 1-20. https://doi.org/10.1007/s00410-015-1169-9 [ Links ]

González-Jiménez, J.M., Barra, F., Garrido, L.N.F., Reich, M., Satsukawa, T., Romero, R., Salazar, E., Colás, V., Orellana, F., Rabbia, O., Plissart, G., Morata, D., 2016, A secondary precious and base metal mineralization in chromitites linked to the development of a Paleozoic accretionary complex in Central Chile: Ore Geology Reviews, 78, 14-40. https://doi.org/10.1016/j.oregeorev.2016.02.017 [ Links ]

González-Jiménez, J.M., Proenza, J.A., Martini, M., Camprubí, A., Griffin, W.L., O’Reilly, S.Y., Pearson, N.J., 2017, Deposits associated with ultramafic-mafic complexes in Mexico: the Loma Baya case: Ore Geology Reviews, 81, 1053-1065. https://doi.org/10.1016/j.oregeorev.2015.05.014 [ Links ]

González-Jiménez, J.M., Colás, V., Gervilla, F., Kerestedjian, T.N., Sergeeva, I., Casado-González, A., Fanlo, I., 2018, Metamorphic evolution of sulphide-rich chromitites from the Chernichevo ultramafic massif, SE Bulgaria: Ore Geology Reviews, 101, 330-348. https://doi.org/10.1016/j.oregeorev.2018.07.024 [ Links ]

González-Mancera, G., Ortega-Gutiérrez, F., Proenza, J.A., Atudorei, V., 2009, Petrology and geochemistry of Tehuitzingo serpentinites (Acatlán Complex, SW Mexico): Boletín de la Sociedad Geológica Mexicana, 61, 3, 419-435. https://doi.org/10.18268/bsgm2009v61n3a9. [ Links ]

Griffin, W.L., Afonso, J.C., Belousova, E., Gain, S.E., Gong, X.H., González-Jiménez, J.M., Howell, D., Huang, J.X., McGowan, N.M., Pearson, N.J., 2016, Mantle Recycling: Transition Zone Metamorphism of Tibetan Ophiolitic Peridotites and Its Tectonic Implications: Journal of Petrology, 57, 4, 655-684. https://doi.org/10.1093/petrology/egw011 [ Links ]

Guereschi, A.B., Martino, R.D., 2008, Field and textural evidence of two migmatization events in the Sierras de Córdoba, Argentina: Gondwana Research, 13, 2, 176-188. https://doi.org/10.1016/j.gr.2007.07.005 [ Links ]

Hey, M.H., 1954, A new review of the chlorites: Mineralogical Magazine and Journal of the Mineralogical Society, 30, 224, 277-292. https://doi.org/10.1180/minmag.1954.030.224.01 [ Links ]

Holland, T.J.B., Powell, R., 1998, An internally consistent thermodynamic data set for phases of petrological interest: Journal of Metamorphic Geology, 16, 3, 309-343. https://doi.org/10.1111/j.1525-1314.1998.00140.x [ Links ]

Irvine, T. N., 1967, Chromian spinel as a petrogenetic indicator: Part 2. Petrologic applications: Canadian Journal of Earth Sciences, 4(1), 71-103. https://doi.org/10.1139/e67-004 [ Links ]

Jan, M.Q., Khan, M.A., Windley, B.F., 1992, Exsolution in Al-Cr-Fe^ 3^ -rich spinels from the Chilas mafic-ultramafic complex, Pakistan: American Mineralogist, 77, 1074-1074. [ Links ]

Kamenetsky, V.S., Crawford, A.J., Meffre, S., 2001, Factors controlling chemistry of magmatic spinel: an empirical study of associated olivine, Cr-spinel and melt inclusions from primitive rocks: Journal of Petrology, 42, 4, 655-671. https://doi.org/10.1093/petrology/42.4.655 [ Links ]

Kapsiotis, A., Rassios, A.E., Uysal, I., Grieco, G., Akmaz, R.M., Saka, S., Bussolesi, M., 2018, Compositional fingerprints of chromian spinel from the refractory chrome ores of Metalleion, Othris (Greece): Implications for metallogeny and deformation of chromitites within a “hot” oceanic fault zone: Journal of Geochemical Exploration, 185, 14-32. https://doi.org/10.1016/j.gexplo.2017.11.003 [ Links ]

Kay, S.M., Gordillo, C.E., 1994, Pocho volcanic rocks and the melting of depleted continental lithosphere above a shallowly dipping subduction zone in the Central Andes: Contributions to Mineralogy and Petrology, 117, 1, 25-44. https://doi.org/10.1007/bf00307727 [ Links ]

Kingery, W.D., Bowen, H.K., Uhlmann, D.R., 1976, Introduction to ceramics, 2nd Ed.: A Wiley Publication, New York, 1056 p. [ Links ]

Lagorio, S.L., Vizán, H., Geuna, S.E., 2016, Early Cretaceous Volcanism in Central Argentina, in Anonymous Early Cretaceous Volcanism in Central and Eastern Argentina During Gondwana Break-Up: Springer, 9-86. https://doi.org/10.1007/978-3-319-29593-0_2 [ Links ]

Leblanc, M., Nicolas, A., 1992, Ophiolitic chromitites: International Geology Review, 34, 7, 653-686. http://dx.doi.org/10.1080/00206819209465629 [ Links ]

Loferski, P.J., 1986, Petrology of metamorphosed chromite-bearing ultramafic rocks from the Red Lodge District, Montana, in Anonymous Alexandria, USA, U.S. Government Printing Office, p. 34. [ Links ]

Majumdar, A.S., Hövelmann, J., Vollmer, C., Berndt, J., Mondal, S.K., Putnis, A., 2016, Formation of Mg-rich olivine pseudomorphs in serpentinized dunite from the Mesoarchean Nuasahi Massif, Eastern India: Insights into the evolution of fluid composition at the mineral-fluid interface: Journal of Petrology, 57, 1, 3-26. https://doi.org/10.1093/petrology/egv070 [ Links ]

Martino, R.D., Kraemer, P.E., Escayola, M.P., Giambastiani, M., Arnosio, M., 1995, Transecta de las Sierras Pampeanas de Córdoba a los 32 S: Revista de la Asociación Geológica Argentina, 50, 1-4, 60-77. [ Links ]

Martino, R.D., 2003, Las fajas de deformación dúctil de las Sierras Pampeanas de Córdoba: Una reseña general: Revista de la Asociación Geológica Argentina, 58, 4, 549-571. [ Links ]

Martino, R.D., Guereschi, A.B., Anzil, P.A., 2010, Metamorphic and tectonic evolution at 31° 36′ S across a deep crustal zone from the Sierra Chica of Córdoba, Sierras Pampeanas, Argentina: Journal of South American Earth Sciences, 30, 1, 12-28. https://doi.org/10.1016/j.jsames.2010.07.008 [ Links ]

Merlini, A., Grieco, G., and Diella, V., 2009, Ferritchromite and chromian-chlorite formation in mélange-hosted Kalkan chromitite (Southern Urals, Russia): American Mineralogist, 94, 10, 1459-1467. ttps://doi.org/10.2138/am.2009.3082 [ Links ]

Ortiz-Hernández, L.E., Escamilla-Casas, J.C., Flores-Castro, K., Ramírez-Cardona, M., Acevedo-Sandoval, O., 2006, Características geológicas y potencial metalogenético de los principales complejos ultramáficos-máficos de México: Boletín de la Sociedad Geológica Mexicana, 58, 1, 161-181. https://doi.org/10.18268/bsgm2006v58n1a6 [ Links ]

Otamendi, J.E., Douce, P., Demichelis, A.H., 1999, Amphibolite to granulite transition in aluminous greywackes from the Sierra de Comechingones, Córdoba, Argentina: Journal of Metamorphic Geology, 17, 4, 415-434. https://doi.org/10.1046/j.1525-1314.1999.00208.x [ Links ]

Otamendi, J.E., Castellarini, P.A., Fagiano, M.R., Demichelis, A.H., Tibaldi, A.M., 2004, Cambrian to Devonian geologic evolution of the Sierra de Comechingones, Eastern Sierras Pampeanas, Argentina: evidence for the development and exhumation of continental crust on the Proto-Pacific margin of Gondwana: Gondwana Research, 7, 4, 1143-1155. https://doi.org/10.1016/s1342-937x(05)71090-x [ Links ]

Otamendi, J.E., Tibaldi, A.M., Demichelis, A.H., Rabbia, O.M., 2005, Metamorphic evolution of the Río Santa Rosa Granulites, northern Sierra de Comechingones, Argentina: Journal of South American Earth Sciences, 18, 2, 163-181. https://doi.org/10.1016/j.jsames.2004.10.006 [ Links ]

Padrón-Navarta, J.A., Hermann, J., Garrido, C.J., López Sánchez-Vizcaíno, V., Gómez-Pugnaire, M.T., 2010, An experimental investigation of antigorite dehydration in natural silica-enriched serpentinite: Contributions to Mineralogy and Petrology, 159, 1, 25-42. https://doi.org/10.1007/s00410-009-0414-5 [ Links ]

Padrón-Navarta, J.A., López Sánchez-Vizcaíno, V., Hermann, J., Connolly, J.A.D., Garrido, C.J., Gómez-Pugnaire, M.T., Marchesi, C., 2013, Tschermak’s substitution in antigorite and consequences for phase relations and water liberation in high-grade serpentinites: Lithos, 178, 186-196. https://doi.org/10.1016/j.lithos.2013.02.001 [ Links ]

Pagé, P., Barnes, S.J., 2009, Using trace elements in chromites to constrain the origin of podiform chromitites in the Thetford Mines ophiolite, Québec, Canada: Economic Geology, 104, 7, 997-1018. https://doi.org/10.2113/gsecongeo.104.7.997 [ Links ]

Pinotti, L.P., Coniglio, J.E., Esparza, A.M., D’Eramo, F.J., Llambıas, E.J., 2002, Nearly circular plutons emplaced by stoping at shallow crustal levels, Cerro Aspero batholith, Sierras Pampeanas de Córdoba, Argentina: Journal of South American Earth Sciences, 15, 2, 251-265. https://doi.org/10.1016/s0895-9811(02)00033-0 [ Links ]

Plissart, G., González-Jiménez, J.M., Garrido, L.N.F., Colas, V., Berger, J., Monnier, C., Diot, H., Padrón-Navarta, J.A., 2019, Tectono-metamorphic evolution of subduction channel serpentinites from South-Central Chile: Lithos, 336, 221-241. https://doi.org/10.1016/j.lithos.2019.03.023 [ Links ]

Pouchou, J.L., Pichoir, F., 1991, Quantitative analysis of homogeneous or stratified microvolumes applying the model PAP, in Heinrich, K.F.J., and Newbury, D.E., eds., Electron Probe Quantitation: Plenum Press, 31-75. https://doi.org/10.1007/978-1-4899-2617-3_4 [ Links ]

Prabhakar, N., Bhattacharya, A., 2013, Origin of zoned spinel by coupled dissolution-precipitation and inter-crystalline diffusion: evidence from serpentinized wehrlite, Bangriposi, Eastern India: Contributions to Mineralogy and Petrology, 166, 4, 1047-1066. https://doi.org/10.1007/s00410-013-0909-y [ Links ]

Proenza, J.A., Gervilla, F., Melgarejo, J.C., Revé, D., Rodríguez, G., 1998, Las cromititas ofiolíticas del yacimiento Mercedita (Cuba). Un ejemplo de cromitas ricas en Al en la zona de transición manto-corteza: Acta Geologica Hispanica, 33, 1-4, 179-212. [ Links ]

Proenza, J.A., Gervilla, F., Melgarejo, J.C., Bodinier, J.L., 1999, Al-and Cr-rich chromitites from the Mayarí-Baracoa ophiolitic belt (eastern Cuba); consequence of interaction between volatile-rich melts and peridotites in suprasubduction mantle: Economic Geology, 94, 4, 547-566. https://doi.org/10.2113/gsecongeo.94.4.547 [ Links ]

Proenza, J.A., Ortega-Gutiérrez, F., Camprubí, A., Tritlla, J., Elías-Herrera, M., Reyes-Salas, M., 2004, Paleozoic serpentinite-enclosed chromitites from Tehuitzingo (Acatlán Complex, southern Mexico): a petrological and mineralogical study: Journal of South American Earth Sciences, 16, 8, 649-666. https://doi.org/10.1016/j.jsames.2003.12.003 [ Links ]

Proenza, J.A., Zaccarini, F., Escayola, M.P., Cábana, C., Schalamuk, A., Garuti, G., 2008, Composition and textures of chromite and platinum-group minerals in chromitites of the western ophiolitic belt from Pampean Ranges of Córdoba, Argentina: Ore Geology Reviews, 33, 1, 32-48. https://doi.org/10.1016/j.oregeorev.2006.05.009 [ Links ]

Pujol-Solà, N., Proenza, J.A., García-Casco, A., González-Jiménez, J.M., Andreazini, A., Melgarejo, J.C., Gervilla, F., 2018, An alternative scenario on the origin of ultra-high pressure (UHP) and super-reduced (SuR) minerals in ophiolitic chromitites: A case study from the Mercedita deposit (eastern Cuba): Minerals, 8, 10, 433. https://doi.org/10.3390/min8100433 [ Links ]

Ramos, V.A., Munizaga, F., Kay, S.M., 1991, El magmatismo Cenozoico a los 33ºS de latitud: geocronología y relaciones tectónicas: 6º Congreso Geológico Chileno, 892-896. [ Links ]

Ramos, V.A., Vujovich, G.I., Martino, R.D., Otamendi, J.E., 2010, Pampia: a large cratonic block missing in the Rodinia supercontinent: Journal of Geodynamics, 50, 3-4, 243-255. https://doi.org/10.1016/j.jog.2010.01.019 [ Links ]

Rapela, C.W., Pankhurst, R.J., Casquet, C., Baldo, E., Saavedra, J., Galindo, C., Fanning, C.M., 1998, The Pampean Orogeny of the southern proto-Andes: Cambrian continental collision in the Sierras de Córdoba: Geological Society, London, Special Publications, 142, 1, 181-217. https://doi.org/10.1144/gsl.sp.1998.142.01.10 [ Links ]

Rapela, C.W., Verdecchia, S.O., Casquet, C., Pankhurst, R.J., Baldo, E.G., Galindo, C., Murra, J.A., Dahlquist, J.A., Fanning, C.M., 2016, Identifying Laurentian and SW Gondwana sources in the Neoproterozoic to Early Paleozoic metasedimentary rocks of the Sierras Pampeanas: Paleogeographic and tectonic implications: Gondwana Research, 32, 193-212. https://doi.org/10.1016/j.gr.2015.02.010 [ Links ]

Rapela, C.W., Pankhurst, R.J., Casquet, C., Dahlquist, J.A., Fanning, C.M., Baldo, E.G., Galindo, C., Alasino, P.H., Ramacciotti, C.D., Verdecchia, S.O., 2018, A review of the Famatinian Ordovician magmatism in southern South America: evidence of lithosphere reworking and continental subduction in the early proto-Andean margin of Gondwana: Earth-Science Reviews, 187, 259-285. https://doi.org/10.1016/j.earscirev.2018.10.006 [ Links ]

Rollinson, H.R., 2008, The geochemistry of mantle chromitites from the northern part of the Oman ophiolite: inferred parental melt compositions: Contributions to Mineralogy and Petrology, 156, 3, 273-288. https://doi.org/10.1007/s00410-008-0284-2 [ Links ]

Sack, R.O., Ghiorso, M.S., 1991a, Chromian spinels as petrogenetic indicators: Thermodynamics and petrological applications: American Mineralogist, 76, 5-6, 827-847. [ Links ]

Sack, R.O., Ghiorso, M.S., 1991b, An internally consistent model for the thermodynamic properties of Fe-Mg-titanomagnetite-aluminate spinels: Contributions to Mineralogy and Petrology, 106, 4, 474-505. https://doi.org/10.1007/bf00325108 [ Links ]

Satsukawa, T., Piazolo, S., González-Jiménez, J.M., Colás, V., Griffin, W.L., O’Reilly, S.Y., Gervilla, F., Fanlo, I., Kerestedjian, T., Kerestedjian, T., 2015, Fluid-present deformation aids chemical modification of chromite: Insights from chromites from Golyamo Kamenyane, SE Bulgaria: Lithos, 228, 78-89. https://doi.org/10.1016/j.lithos.2015.04.020 [ Links ]

Siegesmund, S., Steenken, A., Martino, R.D., Wemmer, K., De Luchi, M.G., Frei, R., Presnyakov, S., Guereschi, A.B., 2010, Time constraints on the tectonic evolution of the Eastern Sierras Pampeanas (Central Argentina): International Journal of Earth Sciences, 99, 6, 1199-1226. https://doi.org/10.1007/s00531-009-0471-z [ Links ]

Stowe, C.W., 1994, Compositions and tectonic settings of chromite deposits through time: Economic Geology, 89, 3, 528-546. https://doi.org/10.2113/gsecongeo.90.7.2092 [ Links ]

Su, B., Chen, Y., Mao, Q., Zhang, D., Jia, L.H., Guo, S., 2019, Minor elements in olivine inspect the petrogenesis of orogenic peridotites: Lithos, 344, 207-216. https://doi.org/10.1016/j.lithos.2019.06.029 [ Links ]

Tamura, A., Arai, S., 2004, Inhomogeneous spinel in chromitite from the Iwanai-dake peridotite complex, Hokkaido, Japan: variations of spinel unmixing texture and chemical composition: Science reports of Kanazawa University, 48, 1, 9-29. [ Links ]

Tamura, A., Arai, S., 2005, Unmixed spinel in chromitite from the Iwanai-dake peridotite complex, Hokkaido, Japan: A reaction between peridotite and highly oxidized magma in the mantle wedge: American Mineralogist, 90, 2-3, 473-480. https://doi.org/10.2138/am.2005.1570 [ Links ]

Tanner, D., McDonald, I., Harmer, R.E.J., Muir, D.D., Hughes, H.S.R., 2019, A record of assimilation preserved by exotic minerals in the lowermost platinum-group element deposit of the Bushveld Complex: The Volspruit Sulphide Zone: Lithos, 324, 584-608. https://doi.org/10.1016/j.lithos.2018.10.032 [ Links ]

Tassinari, C.C.G., Castroviejo, R., Rodrigues, J.F., Acosta, J., Pereira, E., 2011, A Neoproterozoic age for the chromitite and gabbro of the Tapo ultramafic Massif, Eastern Cordillera, Central Peru and its tectonic implications: Journal of South American Earth Sciences, 32, 4, 429-437. https://doi.org/10.1016/j.jsames.2011.03.008 [ Links ]

Uysal, I., Akmaz, R.M., Saka, S., Kapsiotis, A., 2016, Coexistence of compositionally heterogeneous chromitites in the Antalya-Isparta ophiolitic suite, SW Turkey: A record of sequential magmatic processes in the sub-arc lithospheric mantle: Lithos, 248,160-174.https://doi.org/10.1016/j.lithos.2016.01.021 [ Links ]

Whitney, D.L., Evans, B.W., 2010, Abbreviations for names of rock-forming minerals: American Mineralogist, 95, 1, 185-187. https://doi.org/10.2138/am.2010.3371 [ Links ]

Wijbrans, C.H., Klemme, S., Berndt, J., Vollmer, C., 2015, Experimental determination of trace element partition coefficients between spinel and silicate melt: the influence of chemical composition and oxygen fugacity: Contributions to Mineralogy and Petrology, 169, 4, 1-33. https://doi.org/10.1007/s00410-015-1128-5 [ Links ]

Xiong, Q., Henry, H., Griffin, W.L., Zheng, J.P., Satsukawa, T., Pearson, N.J., O’Reilly, S.Y., 2017, High-and low-Cr chromitite and dunite in a Tibetan ophiolite: evolution from mature subduction system to incipient forearc in the Neo-Tethyan Ocean: Contributions to Mineralogy and Petrology, 172, 6, 45. https://doi.org/10.1007/s00410-017-1364-y [ Links ]

Yao, S., 1999, Chemical composition of chromites from ultramafic rocks: application to mineral exploration and petrogenesis: Sydney, Australia, Macquarie University, 174 p. [ Links ]

Yu, H., Zhang, H.F., Zou, H.B., Yang, Y.H., 2019, Minor and trace element variations in chromite from the Songshugou dunites, North Qinling Orogen: Evidence for amphibolite-facies metamorphism: Lithos, 328, 146-158. https://doi.org/10.1016/j.lithos.2019.01.009 [ Links ]

Zhang, L., Smyth, J.R., Kawazoe, T., Jacobsen, S.D., Qin, S., 2018, Transition metals in the transition zone: partitioning of Ni, Co, and Zn between olivine, wadsleyite, ringwoodite, and clinoenstatite: Contributions to Mineralogy and Petrology, 173, 7, 52. https://doi.org/10.1007/s00410-018-1478-x [ Links ]

Zhou, M.F., Robinson, P.T., Su, B.X., Gao, J.F., Li, J.W., Yang, J.S., Malpas, J., 2014, Compositions of chromite, associated minerals, and parental magmas of podiform chromite deposits: The role of slab contamination of asthenospheric melts in suprasubduction zone environments: Gondwana Research, 26, 1, 262-283. [ Links ]

Appendix

Appendix 1 Electron-microprobe data of chromite from Los Congos and Los Guanacos (Argentina) chromitites. 

Sample Texture Microstructure type Chromite grain zone Analysis# Wt(%) apfu (calculated on the basis of 4 oxigen atoms) Cr#=Cr/(Cr+Al) Mg#=Mg/(Mg+Fe2+) Fe3+#=Fe3+/(Fe3++Cr+Al) Fe3+/(Fe3++Fe2+) Al#=Al/(Al+Fe3+)
SiO2 TiO2 Al2O3 Cr2O3 Fe2O3 FeO V2O3 MnO MgO ZnO NiO Total Cr Ti V Al Fe3+ Fe2+ Mn Mg Ni Zn
Los Congos M-25 Massive Type I Core to rim profile 1 0.00 0.18 19.46 37.53 16.52 14.38 0.11 0.44 13.62 0.00 0.23 102.5 0.91 0.00 0.00 0.70 0.38 0.37 0.01 0.62 0.01 0.00 0.56 0.63 0.19 0.51 0.65
M-25 Massive Type I Core to rim profile 2 0.00 0.27 19.16 37.57 16.08 13.84 0.13 0.50 13.78 0.00 0.22 101.60 0.91 0.01 0.00 0.70 0.37 0.36 0.01 0.63 0.01 0.00 0.57 0.64 0.19 0.51 0.65
M-25 Massive Type I Core to rim profile 3 0.00 0.22 20.81 37.41 15.33 13.87 0.13 0.43 14.10 0.16 0.21 102.70 0.89 0.01 0.00 0.74 0.35 0.35 0.01 0.64 0.01 0.00 0.55 0.64 0.18 0.50 0.68
M-25 Massive Type I Core to rim profile 4 0.00 0.17 19.94 35.03 18.22 14.03 0.14 0.49 13.62 0.17 0.32 102.10 0.85 0.00 0.00 0.72 0.42 0.36 0.01 0.62 0.01 0.00 0.54 0.63 0.21 0.54 0.63
M-25 Massive Type I Core to rim profile 5 0.00 0.19 20.59 36.18 16.16 13.79 0.12 0.44 13.98 0.00 0.20 101.60 0.87 0.00 0.00 0.74 0.37 0.35 0.01 0.64 0.00 0.00 0.54 0.64 0.19 0.51 0.67
M-25 Massive Type I Core to rim profile 6 0.00 0.18 20.76 38.29 14.09 13.52 0.12 0.45 14.25 0.00 0.15 101.80 0.92 0.00 0.00 0.74 0.32 0.34 0.01 0.65 0.00 0.00 0.55 0.65 0.16 0.48 0.70
M-25 Massive Type I Core to rim profile 7 0.00 0.17 22.07 37.61 13.39 12.93 0.13 0.38 14.69 0.14 0.18 101.70 0.90 0.00 0.00 0.79 0.30 0.33 0.01 0.66 0.00 0.00 0.53 0.67 0.15 0.48 0.72
M-25 Massive Type I Core to rim profile 8 0.00 0.18 22.61 35.69 14.72 12.81 0.12 0.46 14.78 0.00 0.27 101.60 0.85 0.00 0.00 0.80 0.33 0.32 0.01 0.66 0.01 0.00 0.51 0.67 0.17 0.51 0.71
M-25 Massive Type I Core to rim profile 9 0.00 0.15 22.40 36.38 14.63 13.00 0.17 0.44 14.77 0.00 0.25 102.20 0.86 0.00 0.00 0.79 0.33 0.33 0.01 0.66 0.01 0.00 0.52 0.67 0.17 0.50 0.71
M-25 Massive Type I Core to rim profile 10 0.00 0.27 18.88 38.52 15.82 14.31 0.13 0.49 13.55 0.13 0.19 102.30 0.93 0.01 0.00 0.68 0.37 0.37 0.01 0.62 0.00 0.00 0.58 0.63 0.18 0.50 0.65
M-25 Massive Type I Core to rim profile 11 0.00 0.28 19.83 37.90 15.33 13.92 0.17 0.52 13.86 0.12 0.22 102.10 0.92 0.01 0.00 0.71 0.35 0.36 0.01 0.63 0.01 0.00 0.56 0.64 0.18 0.50 0.67
M-25 Massive Type I Core to rim profile 12 0.00 0.19 20.94 38.20 14.28 13.26 0.12 0.46 14.42 0.15 0.15 102.20 0.91 0.00 0.00 0.75 0.33 0.34 0.01 0.65 0.00 0.00 0.55 0.66 0.16 0.49 0.70
M-25 Massive Type I Core to rim profile 13 0.05 0.23 21.08 37.61 14.18 15.15 0.10 0.48 13.27 0.17 0.13 102.40 0.90 0.01 0.00 0.76 0.32 0.39 0.01 0.60 0.00 0.00 0.54 0.61 0.16 0.46 0.70
M-25 Massive Type I Core to rim profile 14 0.20 0.24 20.18 36.78 15.51 14.65 0.09 0.45 13.50 0.13 0.24 102.00 0.89 0.01 0.00 0.73 0.36 0.37 0.01 0.62 0.01 0.00 0.55 0.62 0.18 0.49 0.67
M-25 Massive Type I Core to rim profile 15 0.14 0.08 25.24 34.91 11.05 12.35 0.12 0.48 14.98 0.08 0.16 99.60 0.83 0.00 0.00 0.90 0.25 0.31 0.01 0.68 0.00 0.00 0.48 0.68 0.13 0.45 0.78
M-25 Massive Type I Core to rim profile 16 0.26 0.16 23.78 35.42 12.48 12.97 0.12 0.45 14.75 0.24 0.15 100.80 0.85 0.00 0.00 0.85 0.28 0.33 0.01 0.66 0.00 0.00 0.50 0.67 0.14 0.46 0.75
M-25 Massive Type I Core to rim profile 17 0.22 0.15 26.10 34.45 11.28 13.00 0.10 0.43 15.12 0.10 0.11 101.00 0.81 0.00 0.00 0.92 0.25 0.32 0.01 0.67 0.00 0.00 0.47 0.67 0.13 0.44 0.78
M-27 Disseminate Type II Spinel-rich phase 18 0.00 0.25 21.40 34.26 16.95 15.61 0.22 0.94 12.63 0.35 0.20 102.80 0.82 0.01 0.01 0.77 0.39 0.40 0.02 0.57 0.00 0.01 0.52 0.59 0.20 0.49 0.66
M-27 Disseminate Type II Spinel-rich phase 19 0.00 0.29 21.80 32.79 17.35 14.16 0.21 0.76 13.38 0.47 0.22 101.40 0.79 0.01 0.01 0.79 0.40 0.36 0.02 0.61 0.01 0.01 0.50 0.63 0.20 0.52 0.66
M-27 Disseminate Type II Spinel-rich phase 20 0.00 0.26 21.92 33.16 17.04 16.80 0.18 0.81 11.95 0.40 0.18 102.70 0.80 0.01 0.00 0.79 0.39 0.43 0.02 0.54 0.00 0.01 0.50 0.56 0.20 0.48 0.67
M-27 Disseminate Type II Spinel-rich phase 21 0.00 1.90 20.06 32.39 16.25 16.27 0.17 0.94 12.73 0.32 0.16 101.20 0.81 0.01 0.00 0.79 0.38 0.50 0.02 0.48 0.00 0.01 0.52 0.58 0.20 0.43 0.66
M-27 Disseminate Type II Spinel-rich phase 22 0.00 0.23 22.00 33.99 16.58 14.34 0.16 0.85 13.39 0.43 0.17 102.10 0.82 0.01 0.00 0.79 0.38 0.36 0.02 0.61 0.00 0.01 0.51 0.62 0.19 0.51 0.68
M-27 Disseminate Type II Spinel-rich phase 23 0.00 1.84 18.93 32.82 16.64 17.08 0.21 0.95 11.99 0.28 0.21 101.00 0.81 0.04 0.01 0.70 0.39 0.45 0.03 0.56 0.01 0.01 0.54 0.56 0.21 0.47 0.64
M-27 Disseminate Type II Magnetite-rich phase 24 0.00 0.73 2.36 20.57 46.52 25.54 0.34 0.83 3.86 0.00 0.74 101.50 0.59 0.02 0.01 0.10 1.26 0.77 0.03 0.21 0.02 0.00 0.85 0.21 0.65 0.62 0.07
M-27 Disseminate Type II Magnetite-rich phase 25 0.00 0.54 2.28 22.16 45.41 25.37 0.35 0.97 3.79 0.00 0.76 101.60 0.63 0.01 0.01 0.10 1.23 0.76 0.03 0.20 0.02 0.00 0.87 0.21 0.63 0.62 0.07
M-27 Disseminate Type II Magnetite-rich phase 26 0.00 0.63 2.44 21.53 45.87 24.93 0.36 0.97 4.16 0.00 0.73 101.60 0.61 0.02 0.01 0.10 1.24 0.75 0.03 0.22 0.02 0.00 0.86 0.23 0.63 0.62 0.08
M-27 Disseminate Type II Magnetite-rich phase 27 0.00 0.64 2.57 21.11 46.17 25.29 0.39 0.87 4.04 0.00 0.76 101.80 0.60 0.02 0.01 0.11 1.24 0.76 0.03 0.22 0.02 0.00 0.85 0.22 0.64 0.62 0.08
M-27 Disseminate Type II Magnetite-rich phase 28 0.00 0.57 2.40 20.24 47.43 25.24 0.36 0.85 4.01 0.00 0.77 101.90 0.57 0.02 0.01 0.10 1.28 0.76 0.03 0.21 0.02 0.00 0.85 0.22 0.65 0.63 0.07
Los Guanacos M-17 Massive Type I Core to rim profile 29 0.00 0.17 14.53 41.32 16.33 15.92 0.13 1.04 11.32 0.25 0.20 101.20 1.05 0.00 0.00 0.55 0.39 0.43 0.03 0.54 0.01 0.01 0.66 0.56 0.20 0.48 0.58
M-17 Massive Type I Core to rim profile 30 0.00 0.13 14.94 43.09 15.10 15.84 0.12 0.88 11.71 0.26 0.22 102.30 1.08 0.00 0.00 0.56 0.36 0.42 0.02 0.55 0.01 0.01 0.66 0.57 0.18 0.46 0.61
M-17 Massive Type I Core to rim profile 31 0.00 0.13 13.65 43.05 15.88 16.20 0.14 1.06 11.15 0.20 0.17 101.60 1.09 0.00 0.00 0.52 0.38 0.43 0.03 0.53 0.00 0.00 0.68 0.55 0.19 0.47 0.57
M-17 Massive Type I Core to rim profile 32 0.00 0.11 12.32 46.12 14.54 16.59 0.12 1.11 10.77 0.26 0.21 102.20 1.17 0.00 0.00 0.47 0.35 0.45 0.03 0.52 0.01 0.01 0.72 0.54 0.18 0.44 0.57
M-17 Massive Type I Core to rim profile 33 0.00 0.11 12.27 46.47 14.16 16.29 0.12 1.01 11.00 0.27 0.15 101.80 1.18 0.00 0.00 0.47 0.34 0.44 0.03 0.53 0.00 0.01 0.72 0.55 0.17 0.44 0.58
M-17 Massive Type I Core to rim profile 34 0.00 0.10 11.80 46.60 14.35 16.59 0.11 1.06 10.69 0.28 0.13 101.70 1.19 0.00 0.00 0.45 0.35 0.45 0.03 0.52 0.00 0.01 0.73 0.53 0.18 0.44 0.56
M-17 Massive Type I Core to rim profile 35 0.00 0.14 13.99 42.88 16.30 16.19 0.13 0.99 11.33 0.30 0.20 102.50 1.08 0.00 0.00 0.52 0.39 0.43 0.03 0.54 0.01 0.01 0.67 0.55 0.20 0.48 0.57
M-17 Massive Type I Core to rim profile 36 0.00 0.15 14.49 41.89 16.40 16.07 0.11 1.05 11.38 0.23 0.16 101.90 1.05 0.00 0.00 0.54 0.39 0.43 0.03 0.54 0.00 0.01 0.66 0.56 0.20 0.48 0.58
M-17 Massive Type I Core to rim profile 37 0.00 0.16 16.82 40.71 15.22 16.42 0.15 1.00 11.50 0.21 0.28 102.50 1.01 0.00 0.00 0.62 0.36 0.43 0.03 0.54 0.01 0.00 0.62 0.56 0.18 0.45 0.63
M-17 Massive Type I Core to rim profile 38 0.00 0.13 16.93 40.52 15.07 16.13 0.11 1.08 11.50 0.24 0.29 102.00 1.01 0.00 0.00 0.63 0.36 0.42 0.03 0.54 0.01 0.01 0.62 0.56 0.18 0.46 0.64
M-17 Massive Type I Core to rim profile 39 0.00 0.13 14.20 43.18 15.79 16.32 0.12 1.04 11.25 0.31 0.19 102.50 1.08 0.00 0.00 0.53 0.38 0.43 0.03 0.53 0.00 0.01 0.67 0.55 0.19 0.47 0.58
M-17 Massive Type I Core to rim profile 40 0.00 0.15 13.48 42.76 16.83 16.56 0.14 1.13 10.96 0.24 0.26 102.50 1.08 0.00 0.00 0.51 0.40 0.44 0.03 0.52 0.01 0.01 0.68 0.54 0.20 0.48 0.56
M-17 Massive Type I Core to rim profile 41 0.00 0.14 13.00 43.49 16.58 16.96 0.11 1.01 10.72 0.26 0.23 102.50 1.10 0.00 0.00 0.49 0.40 0.45 0.03 0.51 0.01 0.01 0.69 0.53 0.20 0.47 0.55
M-17 Massive Type I Core to rim profile 42 0.00 0.14 15.81 40.71 16.26 16.28 0.16 1.06 11.34 0.28 0.32 102.40 1.01 0.00 0.00 0.59 0.39 0.43 0.03 0.53 0.01 0.01 0.63 0.55 0.19 0.47 0.60
M-17 Massive Type I Core to rim profile 43 0.00 0.14 15.39 40.99 16.54 16.43 0.12 1.08 11.27 0.23 0.23 102.40 1.02 0.00 0.00 0.57 0.39 0.43 0.03 0.53 0.01 0.01 0.64 0.55 0.20 0.48 0.59
M-17 Massive Type I Core to rim profile 44 0.00 0.15 12.89 43.16 16.71 17.06 0.11 1.10 10.49 0.26 0.30 102.20 1.10 0.00 0.00 0.49 0.40 0.46 0.03 0.50 0.01 0.01 0.69 0.52 0.20 0.47 0.55
3317 Semimassive Type I Core to rim profile 45 0.00 0.13 19.93 44.78 6.93 17.15 0.23 0.40 11.76 0.15 0.16 101.60 1.10 0.00 0.01 0.73 0.16 0.44 0.01 0.54 0.00 0.00 0.60 0.55 0.08 0.27 0.82
3317 Semimassive Type I Core to rim profile 46 0.00 0.13 20.04 45.09 7.08 17.40 0.15 0.37 11.75 0.21 0.11 102.30 1.10 0.00 0.00 0.73 0.16 0.45 0.01 0.54 0.00 0.00 0.60 0.55 0.08 0.27 0.82
3317 Semimassive Type I Core to rim profile 47 0.00 0.17 18.81 46.61 6.70 17.44 0.22 0.40 11.61 0.21 0.11 102.30 1.14 0.00 0.01 0.69 0.16 0.45 0.01 0.54 0.00 0.00 0.62 0.54 0.08 0.26 0.81
3317 Semimassive Type I Core to rim profile 48 0.00 0.24 13.01 51.66 6.66 19.16 0.18 0.44 9.80 0.14 0.00 101.30 1.32 0.01 0.00 0.50 0.16 0.52 0.01 0.47 0.00 0.00 0.73 0.48 0.08 0.24 0.75
3317 Semimassive Type I Core to rim profile 49 0.00 0.27 14.80 49.39 7.90 18.76 0.19 0.42 10.36 0.24 0.15 102.50 1.24 0.01 0.00 0.55 0.19 0.50 0.01 0.49 0.00 0.01 0.69 0.50 0.10 0.27 0.75
3317 Semimassive Type I Core to rim profile 50 0.00 0.21 14.07 50.54 6.83 18.64 0.16 0.40 10.21 0.20 0.00 101.30 1.29 0.01 0.00 0.53 0.17 0.50 0.01 0.49 0.00 0.00 0.71 0.49 0.08 0.25 0.76
3317 Semimassive Type I Core to rim profile 51 0.00 0.18 19.23 45.02 7.15 17.36 0.18 0.37 11.57 0.23 0.00 101.30 1.11 0.00 0.00 0.71 0.17 0.45 0.01 0.54 0.00 0.01 0.61 0.54 0.08 0.27 0.81
2260a Disseminate Type I Core to rim profile 52 0.25 0.13 19.12 37.67 15.41 18.62 0.10 0.41 11.06 0.21 0.15 103.10 0.92 0.00 0.00 0.70 0.36 0.48 0.01 0.51 0.00 0.00 0.57 0.51 0.18 0.43 0.66
2260a Disseminate Type I Core to rim profile 53 0.07 0.16 19.24 35.29 17.48 18.12 0.09 0.32 11.13 0.17 0.16 102.20 0.87 0.00 0.00 0.71 0.41 0.47 0.01 0.52 0.00 0.00 0.55 0.52 0.21 0.46 0.63
2260a Disseminate Type I Core to rim profile 54 0.09 0.20 14.45 36.54 20.56 21.30 0.06 0.39 8.60 0.02 0.26 102.50 0.93 0.00 0.00 0.55 0.50 0.58 0.01 0.41 0.01 0.00 0.63 0.42 0.25 0.46 0.52
2260a Disseminate Type I Core to rim profile 55 0.03 0.19 15.48 35.47 21.22 20.53 0.05 0.30 9.26 0.12 0.18 102.80 0.90 0.00 0.00 0.58 0.51 0.55 0.01 0.44 0.00 0.00 0.61 0.45 0.26 0.48 0.53
2260a Disseminate Type I Core to rim profile 56 0.11 0.19 19.17 35.60 16.81 18.92 0.07 0.42 10.59 0.14 0.16 102.20 0.88 0.00 0.00 0.71 0.40 0.50 0.01 0.49 0.00 0.00 0.55 0.50 0.20 0.44 0.64
2260a Disseminate Type I Core to rim profile 57 0.09 0.24 16.88 34.73 20.18 20.30 0.09 0.29 9.66 0.04 0.22 102.70 0.87 0.01 0.00 0.63 0.48 0.54 0.01 0.46 0.01 0.00 0.58 0.46 0.24 0.47 0.57
2260a Disseminate Type I Core to rim profile 58 0.06 0.22 17.80 35.15 17.78 19.04 0.06 0.34 10.15 0.18 0.08 100.90 0.89 0.01 0.00 0.67 0.43 0.51 0.01 0.48 0.00 0.00 0.57 0.49 0.22 0.46 0.61
2260a Disseminate Type I Core to rim profile 59 0.08 0.17 14.42 36.87 20.00 20.42 0.07 0.40 8.98 0.06 0.23 101.70 0.95 0.00 0.00 0.55 0.49 0.55 0.01 0.43 0.01 0.00 0.63 0.44 0.25 0.47 0.53
2226 Massive Type III Spinel-rich phase 60 0.00 0.06 27.75 30.71 14.98 11.92 0.00 0.45 15.65 0.50 0.23 102.30 0.71 0.00 0.00 0.96 0.33 0.29 0.01 0.68 0.01 0.10 0.43 0.70 0.17 0.53 0.74
2226 Massive Type III Spinel-rich phase 61 0.00 0.00 27.70 30.72 14.64 13.31 0.08 0.44 14.81 0.43 0.19 102.30 0.71 0.00 0.00 0.96 0.32 0.33 0.01 0.65 0.00 0.01 0.43 0.66 0.16 0.50 0.75
2226 Massive Type III Spinel-rich phase 62 0.00 0.07 26.42 29.79 16.42 13.52 0.10 0.45 14.45 0.45 0.20 101.90 0.70 0.00 0.00 0.93 0.37 0.34 0.01 0.64 0.00 0.01 0.43 0.66 0.18 0.52 0.72
2226 Massive Type III Spinel-rich phase 63 0.05 0.04 29.21 30.86 13.52 11.30 0.09 0.48 16.31 0.43 0.20 102.50 0.71 0.00 0.00 1.00 0.29 0.27 0.01 0.70 0.00 0.01 0.41 0.72 0.15 0.52 0.77
2226 Massive Type III Spinel-rich phase 64 0.00 0.05 26.53 30.20 16.61 12.90 0.08 0.48 14.94 0.46 0.21 102.50 0.70 0.00 0.00 0.92 0.37 0.32 0.01 0.66 0.00 0.01 0.43 0.67 0.18 0.54 0.71
2226 Massive Type III Spinel-rich phase 65 0.00 0.06 29.19 31.68 10.91 14.45 0.06 0.41 14.12 0.46 0.20 101.50 0.74 0.00 0.00 1.01 0.24 0.36 0.01 0.62 0.00 0.01 0.42 0.64 0.12 0.40 0.81
2226 Massive Type III Spinel-rich phase 66 0.00 0.05 27.16 30.10 15.66 12.82 0.09 0.41 15.00 0.49 0.20 102.00 0.70 0.00 0.00 0.95 0.35 0.32 0.01 0.66 0.00 0.01 0.43 0.68 0.17 0.52 0.73
2226 Massive Type III Spinel-rich phase 67 0.03 0.04 28.53 30.19 14.16 12.16 0.09 0.44 15.60 0.38 0.18 101.80 0.70 0.00 0.00 0.98 0.31 0.30 0.01 0.68 0.00 0.01 0.42 0.70 0.16 0.51 0.76
2226 Massive Type III Spinel-rich phase 68 0.04 0.07 27.75 30.86 14.99 12.35 0.08 0.49 15.55 0.38 0.21 102.80 0.71 0.00 0.00 0.95 0.33 0.30 0.01 0.68 0.00 0.01 0.43 0.69 0.16 0.52 0.74
2226 Massive Type III Spinel-rich phase 69 0.00 0.05 29.71 31.15 13.14 10.91 0.07 0.49 16.74 0.41 0.14 102.80 0.71 0.00 0.00 1.01 0.28 0.26 0.01 0.72 0.00 0.01 0.41 0.73 0.14 0.52 0.78
2226 Massive Type III Magnetite-rich phase 70 0.00 0.24 4.53 24.29 42.51 23.02 0.18 0.70 5.62 0.00 0.69 101.80 0.67 0.01 0.01 0.19 1.12 0.67 0.02 0.29 0.02 0.00 0.78 0.30 0.57 0.62 0.14
2226 Massive Type III Magnetite-rich phase 71 0.00 0.27 4.37 23.31 43.98 23.21 0.19 0.72 5.45 0.21 0.75 102.50 0.64 0.01 0.01 0.18 1.16 0.68 0.02 0.28 0.02 0.01 0.78 0.29 0.58 0.63 0.13
2226 Massive Type III Magnetite-rich phase 72 0.00 0.24 4.45 23.38 43.60 23.06 0.19 0.67 5.55 0.14 0.70 102.00 0.65 0.01 0.01 0.18 1.15 0.68 0.02 0.29 0.02 0.00 0.78 0.30 0.58 0.63 0.14
2226 Massive Type III Magnetite-rich phase 73 0.00 0.24 4.57 23.20 44.36 22.70 0.20 0.70 5.87 0.13 0.82 102.80 0.64 0.01 0.01 0.19 1.16 0.66 0.02 0.30 0.02 0.00 0.77 0.32 0.58 0.64 0.14
2226 Massive Type III Magnetite-rich phase 74 0.00 0.25 4.56 22.88 44.41 23.13 0.19 0.58 5.68 0.13 0.73 102.50 0.63 0.01 0.01 0.19 1.16 0.67 0.02 0.29 0.02 0.00 0.77 0.30 0.59 0.63 0.14
2226 Massive Type III Magnetite-rich phase 75 0.00 0.25 4.97 24.08 42.92 22.35 0.16 0.73 6.17 0.00 0.75 102.40 0.66 0.01 0.00 0.20 1.12 0.65 0.02 0.32 0.02 0.00 0.76 0.33 0.56 0.63 0.15
2226 Massive Type III Magnetite-rich phase 76 0.00 0.27 5.24 24.58 41.73 22.55 0.21 0.70 5.99 0.18 0.72 102.20 0.67 0.01 0.01 0.21 1.09 0.65 0.02 0.31 0.02 0.00 0.76 0.32 0.55 0.62 0.16
2226 Massive Type III Magnetite-rich phase 77 0.00 0.25 3.83 21.76 46.30 23.51 0.20 0.64 5.34 0.00 0.82 102.60 0.60 0.01 0.01 0.16 1.22 0.69 0.02 0.28 0.02 0.00 0.79 0.29 0.62 0.64 0.11
2226 Massive Type III Magnetite-rich phase 78 0.00 0.24 3.94 22.72 45.34 23.52 0.20 0.70 5.36 0.00 0.80 102.80 0.63 0.01 0.01 0.16 1.19 0.69 0.02 0.28 0.02 0.00 0.79 0.29 0.60 0.63 0.12

Appendix 2

Electron-microprobe data of silicates from Los Congos and Los Guanacos (Argentina) chromitites. 

Sample Chromitite texture Microstructure type Analysis# Wt(%) apfu (calculated on the basis of 7 oxigen atoms) Mg#=Mg/(Mg+Fe2+)
SiO2 TiO2 Al2O3 Cr2O3 MnO FeO MgO NiO CaO Na2O K2O Total Si Ti Al Cr Mn Fe Mg Ni
Los Congos M-25 Massive Type I 1 43.97 - 3.60 1.03 0.07 2.76 36.47 - 0.39 - - 87.90 2.02 - 0.20 0.04 0.00 0.07 2.50 - 0.97
M-25 Massive Type I 2 44.66 - 3.38 1.26 0.05 2.88 36.40 - 0.48 - - 88.60 2.04 - 0.18 0.05 0.00 0.07 2.47 - 0.97
M-25 Massive Type I 3 43.43 - 3.99 1.33 0.11 2.93 36.49 - 0.33 - - 88.30 1.99 - 0.22 0.05 0.00 0.08 2.50 - 0.97
M-25 Massive Type I 4 43.82 - 3.68 0.95 0.06 2.65 36.64 - 0.38 - - 87.80 2.02 - 0.20 0.03 0.00 0.07 2.51 - 0.97
M-25 Massive Type I 5 43.27 - 3.79 1.39 0.09 3.19 36.04 - 0.37 - - 87.80 2.00 - 0.21 0.05 0.00 0.08 2.48 - 0.97
M-25 Massive Type I 6 42.85 - 3.40 0.70 0.02 1.91 38.78 - 0.18 - - 87.70 1.97 - 0.18 0.03 0.00 0.05 2.66 - 0.98
M-25 Massive Type I 7 43.15 - 3.91 1.12 0.00 2.39 39.03 - 0.19 - - 89.60 1.95 - 0.21 0.04 0.00 0.06 2.63 - 0.98
M-25 Massive Type I 8 43.21 - 3.90 0.68 0.02 1.78 38.97 - 0.18 - - 88.60 1.97 - 0.21 0.02 0.00 0.05 2.65 - 0.98
M-25 Massive Type I 9 42.42 - 3.01 1.06 0.02 1.90 39.33 - 0.20 - - 87.70 1.96 - 0.16 0.04 0.00 0.05 2.71 - 0.98
Los Guanacos M-17 Massive Type I 12 42.9 - 0.01 0.25 0.09 3.14 38.15 - 0.04 - - 84.50 2.06 - 0.00 0.01 0.00 0.08 2.73 - 0.97
M-17 Massive Type I 13 42.17 - 0.03 0.11 0.08 3.05 39.98 - 0.05 - - 85.40 2.01 - 0.00 0.00 0.00 0.08 2.84 - 0.97
M-17 Massive Type I 14 39.71 - 0.00 0.03 0.09 3.30 38.95 - 0.04 - - 82.10 1.98 - 0.00 0.00 0.00 0.09 2.90 - 0.97
M-17 Massive Type I 15 43.16 - 0.03 0.07 0.04 1.92 40.32 - 0.02 - - 85.50 2.04 - 0.00 0.00 0.00 0.05 2.84 - 0.98
M-17 Massive Type I 16 42.13 - 0.03 0.03 0.05 2.49 40.06 - 0.02 - - 84.80 2.02 - 0.00 0.00 0.00 0.07 2.86 - 0.98
M-17 Massive Type I 17 40.34 - 0.03 0.11 0.03 3.05 39.10 - 0.03 - - 82.70 1.99 - 0.00 0.00 0.00 0.08 2.88 - 0.97
M-17 Massive Type I 18 42.16 - 0.02 0.26 0.05 2.47 41.12 - 0.02 - - 86.10 1.99 - 0.00 0.01 0.00 0.07 2.90 - 0.98
M-17 Massive Type I 19 42.94 - 0.06 0.21 0.10 2.14 39.60 - 0.02 - - 85.10 2.04 - 0.00 0.01 0.00 0.06 2.81 - 0.98
M-17 Massive Type I 20 41.92 - 0.01 0.11 0.06 2.03 40.37 - 0.03 - - 84.50 2.01 - 0.00 0.00 0.00 0.05 2.89 - 0.98
M-17 Massive Type I 21 40.22 - 0.04 0.25 0.10 2.95 39.11 - 0.03 - - 82.70 1.99 - 0.00 0.01 0.00 0.08 2.88 - 0.97
3317 Semimassive Type I 22 41.79 0.05 0.55 0.22 0.06 1.77 37.24 0.14 0.07 - - 81.90 2.06 0 0.03 0.01 0.00 0.05 2.74 0.01 0.98
3317 Semimassive Type I 26 42.79 0.05 0.71 0.25 0.08 2.73 37.27 0.08 0.11 - - 84.10 2.06 0 0.04 0.01 0.00 0.07 2.68 0.01 0.97

Sample Chromitite texture Microstructure type Analysis# Wt(%) apfu (calculated on the basis of 4 oxigen atoms) Mg#=Mg/(Mg+Fe2+) Fe2+/(Fe2++Mg)
SiO2 TiO2 Al2O3 Cr2O3 MgO FeO NiO MnO CaO Na2O K2O Total Si AlIV sum T AlVI Cr Ti Mg Fe2+ Ni Mn sum O
Los Guanacos M-17 Massive Homogeneous 29 31.82 0.04 18.02 2 33.18 1.97 - 0.03 0.02 0.00 0.02 87.10 2.99 1.01 4.00 0.98 0.15 0.00 4.64 0.15 - 0.00 5.93 0.97 0.03
M-17 Massive Homogeneous 30 31.41 0.01 18.36 1.94 33.61 1.86 - 0.04 0.02 0.03 0.00 87.30 2.94 1.06 4.00 0.97 0.14 0.00 4.70 0.15 - 0.00 5.96 0.97 0.03
M-17 Massive Homogeneous 31 31.27 0.05 18.22 2.03 32.78 1.91 - 0.03 0.01 0.00 0.00 86.30 2.96 1.04 4.00 1.00 0.15 0.00 4.63 0.15 - 0.00 5.93 0.97 0.03
M-17 Massive Homogeneous 32 31.61 0.01 17.87 2.15 32.89 2.12 - 0.03 0.02 0.01 0.02 86.70 2.99 1.01 4.00 0.97 0.16 0.00 4.63 0.17 - 0.00 5.93 0.97 0.03
M-17 Massive Homogeneous 33 31.37 0.04 17.45 2.18 33.4 1.84 - 0.01 0.01 0.02 0.00 87.30 2.98 1.02 4.00 0.93 0.16 0.00 4.72 0.15 - 0.00 5.96 0.97 0.03
M-17 Massive Homogeneous 34 31.87 0.03 17.47 2.65 34.27 2.47 - 0.04 0.00 0.01 0.00 88.80 2.95 1.05 4.00 0.86 0.19 0.00 4.74 0.19 - 0.00 5.99 0.96 0.04
M-17 Massive Homogeneous 35 30.21 0.07 17.89 3.95 32.98 1.83 - 0.14 0.02 0.00 0.00 87.10 2.86 1.14 4.00 0.86 0.30 0.00 4.66 0.15 - 0.00 5.97 0.97 0.03
M-17 Massive Homogeneous 43 29.01 0.16 18.34 2.59 33.14 2.63 - 0.08 0.00 0.01 0.00 86.00 2.79 1.21 4.00 0.87 0.20 0.00 4.76 0.21 - 0.00 6.04 0.96 0.04

Sample Chromitite text Microstructure type Analysis# Wt(%) apfu (calculated on the basis of 6 oxigen atoms) En Wo Fs Mg#=Mg/(Mg+Fe2+)
SiO2 TiO2 Al2O3 Cr2O3 MgO FeO NiO MnO CaO Na2O K2O Total Si AlIV sum T AlVI Cr Ti Mg Fe2+ Ni Mn sum M1 Mg Fe2+ Ni Mn Ca Na K sum M2 Total
Los Congos M-25 Massive Type I 1 56.58 0.14 3.67 0.93 22.68 1.98 - 0.06 13.20 0.24 0.00 99.50 1.99 0.01 2.00 0.14 0.03 0.00 0.83 0.00 0.00 0.00 1.00 0.36 0.06 0.00 0.00 0.50 0.02 0.00 0.93 3.93 68.16 28.51 3.34 0.95
M-25 Massive Type I 2 56.90 0.19 3.68 0.98 22.49 1.92 - 0.06 12.96 0.24 0.00 99.40 2.00 0.00 2.00 0.15 0.03 0.01 0.82 0.00 0.00 0.00 1.00 0.36 0.06 0.00 0.00 0.49 0.02 0.00 0.92 3.92 68.40 28.32 3.28 0.95
M-25 Massive Type I 3 56.89 0.20 3.69 0.74 22.59 1.88 - 0.07 13.07 0.21 0.00 99.30 2.00 0.00 2.00 0.15 0.02 0.01 0.83 0.00 0.00 0.00 1.00 0.36 0.06 0.00 0.00 0.49 0.01 0.00 0.92 3.92 68.38 28.43 3.19 0.96
M-25 Massive Type I 4 56.30 0.16 4.06 1.09 22.75 2.05 - 0.05 13.34 0.36 0.00 100.20 1.97 0.03 2.00 0.14 0.03 0.00 0.83 0.00 0.00 0.00 1.00 0.36 0.06 0.00 0.00 0.50 0.02 0.00 0.94 3.94 67.94 28.63 3.43 0.95
M-25 Massive Type I 5 56.84 0.21 3.61 0.86 22.68 1.85 - 0.07 13.17 0.23 0.01 99.50 1.99 0.01 2.00 0.14 0.02 0.01 0.83 0.00 0.00 0.00 1.00 0.36 0.05 0.00 0.00 0.49 0.02 0.00 0.92 3.92 68.35 28.52 3.13 0.96
M-25 Massive Type I 6 56.69 0.16 3.88 0.94 22.27 1.92 - 0.09 13.04 0.27 0.00 99.30 1.99 0.01 2.00 0.15 0.03 0.00 0.82 0.00 0.00 0.00 1.00 0.35 0.06 0.00 0.00 0.49 0.02 0.00 0.92 3.92 68.07 28.64 3.29 0.95
M-25 Massive Type I 7 56.92 0.25 3.54 0.96 22.99 1.68 - 0.08 13.27 0.25 0.01 99.90 1.99 0.01 2.00 0.13 0.03 0.01 0.83 0.00 0.00 0.00 1.00 0.36 0.05 0.00 0.00 0.50 0.02 0.00 0.93 3.93 68.69 28.49 2.82 0.96
M-25 Massive Type I 8 56.77 0.14 3.62 1.08 23.04 1.96 - 0.09 13.23 0.24 0.00 100.20 1.98 0.02 2.00 0.13 0.03 0.00 0.84 0.00 0.00 0.00 1.00 0.36 0.06 0.00 0.00 0.49 0.02 0.00 0.93 3.93 68.48 28.26 3.27 0.95
M-25 Massive Type I 9 56.72 0.15 3.57 0.96 22.84 2.14 - 0.09 13.16 0.27 0.00 99.90 1.99 0.01 2.00 0.13 0.03 0.00 0.84 0.00 0.00 0.00 1.00 0.36 0.06 0.00 0.00 0.49 0.02 0.00 0.93 3.93 68.18 28.23 3.58 0.95
M-25 Massive Type I 10 57.13 0.18 3.60 0.73 22.74 1.73 - 0.07 13.24 0.24 0.00 99.70 2.00 0.00 2.00 0.15 0.02 0.00 0.83 0.00 0.00 0.00 1.00 0.36 0.05 0.00 0.00 0.50 0.02 0.00 0.92 3.92 68.44 28.64 2.92 0.96
M-25 Massive Type I 11 57.19 0.17 3.15 0.55 23.13 1.86 - 0.03 13.06 0.21 0.01 99.40 2.01 0.00 2.01 0.13 0.02 0.00 0.85 0.00 0.00 0.00 1.00 0.36 0.05 0.00 0.00 0.49 0.01 0.00 0.92 3.92 68.92 27.97 3.11 0.96
M-25 Massive Type I 12 56.73 0.14 3.62 0.95 22.72 1.95 - 0.06 13.14 0.25 0.00 99.60 1.99 0.01 2.00 0.14 0.03 0.00 0.83 0.00 0.00 0.00 1.00 0.36 0.06 0.00 0.00 0.49 0.02 0.00 0.93 3.93 68.32 28.39 3.29 0.95
M-25 Massive Type I 13 55.85 0.19 3.60 0.88 22.78 1.90 - 0.09 13.21 0.28 0.00 98.80 1.98 0.02 2.00 0.13 0.02 0.01 0.84 0.00 0.00 0.00 1.00 0.36 0.06 0.00 0.00 0.50 0.02 0.00 0.94 3.94 68.33 28.47 3.20 0.96
M-25 Massive Type I 14 55.29 0.13 3.34 0.89 23.02 1.96 - 0.13 13.17 0.20 0.01 98.10 1.97 0.03 2.00 0.11 0.03 0.00 0.86 0.00 0.00 0.00 1.00 0.37 0.06 0.00 0.00 0.50 0.01 0.00 0.94 3.95 68.55 28.18 3.27 0.95
M-25 Massive Type I 15 56.56 0.18 3.68 0.70 22.67 2.02 - 0.10 13.02 0.19 0.02 99.10 1.99 0.01 2.00 0.14 0.02 0.00 0.83 0.00 0.00 0.00 1.00 0.36 0.06 0.00 0.00 0.49 0.01 0.00 0.92 3.93 68.37 28.22 3.41 0.95
M-25 Massive Type I 16 56.08 0.14 3.80 0.90 22.48 1.98 - 0.05 13.10 0.20 0.01 98.70 1.98 0.02 2.00 0.14 0.03 0.00 0.83 0.00 0.00 0.00 1.00 0.36 0.06 0.00 0.00 0.50 0.01 0.00 0.93 3.93 68.11 28.52 3.37 0.95
M-25 Massive Type I 17 55.72 0.17 3.83 0.87 22.48 1.88 - 0.07 13.35 0.23 0.03 98.60 1.98 0.02 2.00 0.14 0.02 0.00 0.83 0.00 0.00 0.00 1.00 0.35 0.06 0.00 0.00 0.51 0.02 0.00 0.93 3.94 67.85 28.96 3.18 0.96
M-27 Disseminated Type II 18 54.99 0.23 3.84 0.50 22.40 2.45 - 0.14 13.33 0.16 0.01 98.00 1.97 0.03 2.00 0.13 0.01 0.01 0.85 0.00 0.00 0.00 1.00 0.34 0.07 0.00 0.00 0.51 0.01 0.00 0.94 3.94 67.15 28.73 4.12 0.94
M-27 Disseminated Type II 19 55.53 0.27 4.02 0.45 22.46 2.39 - 0.15 13.38 0.20 0.00 98.80 1.97 0.03 2.00 0.14 0.01 0.01 0.84 0.00 0.00 0.00 1.00 0.34 0.07 0.00 0.00 0.51 0.01 0.00 0.94 3.94 67.22 28.77 4.01 0.94
M-27 Disseminated Type II 20 55.77 0.23 3.59 0.43 22.39 2.43 - 0.13 13.36 0.14 0.00 98.50 1.98 0.02 2.00 0.13 0.01 0.01 0.85 0.00 0.00 0.00 1.00 0.34 0.07 0.00 0.00 0.51 0.01 0.00 0.93 3.93 67.14 28.78 4.08 0.94
M-27 Disseminated Type II 21 55.02 0.33 4.96 0.72 22.11 2.86 - 0.14 13.23 0.26 0.01 99.60 1.94 0.06 2.00 0.15 0.02 0.01 0.82 0.00 0.00 0.00 1.00 0.34 0.08 0.00 0.00 0.50 0.02 0.00 0.94 3.95 66.55 28.62 4.83 0.93
M-27 Disseminated Type II 22 54.53 0.26 4.09 0.67 22.30 2.85 - 0.14 13.27 0.18 0.02 98.30 1.95 0.05 2.00 0.12 0.02 0.01 0.85 0.00 0.00 0.00 1.00 0.34 0.09 0.00 0.00 0.51 0.01 0.00 0.95 3.95 66.70 28.52 4.78 0.93
M-27 Disseminated Type II 23 56.55 0.22 3.50 0.43 22.81 2.48 - 0.15 13.22 0.13 0.02 99.50 1.99 0.01 2.00 0.13 0.01 0.01 0.85 0.00 0.00 0.00 1.00 0.35 0.07 0.00 0.00 0.50 0.01 0.00 0.93 3.93 67.69 28.19 4.12 0.94
Los Guanacos 3317 Semimassive Type I 24 56.26 0.18 2.94 0.89 22.95 2.07 - 0.07 13.73 0.18 0.01 99.3 1.99 0.01 2.00 0.11 0.02 0.01 0.86 0.00 0.00 0.00 1.00 0.35 0.06 0.00 0.00 0.52 0.01 0.00 0.94 3.94 67.54 29.04 3.42 0.95
3320 Semimassive Type I 25 56.28 0.1 2.19 0.84 23 1.74 - 0.02 13.89 0.16 0.01 98.2 2.01 0.00 2.01 0.09 0.02 0.01 0.88 0.00 0.00 0.00 1.00 0.34 0.05 0.00 0.00 0.53 0.01 0.00 0.93 3.94 67.73 29.40 2.87 0.96
3317 Semimassive Type I 26 56.03 0.15 3.15 0.69 22.32 2.35 - 0.02 13.65 0.18 0 98.5 1.98 0.02 2.00 0.11 0.02 0.01 0.86 0.00 0.00 0.00 1.00 0.34 0.07 0.00 0.00 0.53 0.01 0.00 0.94 3.95 66.73 29.32 3.95 0.94

Appendix 3

Dataset of LA-ICP-MS analysis of minor and trace elements in chromite from studied chromitites of Los Congos and Los Guanacos (Argentina). 

Sample Texture Microstructure type Chromite grain zone Analysis# Cr# ppm Normalized
Al2O3* Ga Mdl Ti Mdl Ni Mdl MgO* Zn Mdl Co Mdl Mn Mdl FeOtot* V Mdl Sc Mdl Cr2O3* (Al2O3)N (Ga)N (Ti)N (Ni)N (MgO)N (Zn)N (Co)N (Mn)N (FeOtot)N (V)N (Sc)N (Cr2O3)N
Los Congos M-25 Massive Type I Core to rim profile 1 0.56 194600 24.59 0.80 0.02 1111.56 35.22 0.22 1481.51 47.47 0.14 136200 1286.54 44.17 0.24 296.48 9.29 0.01 3238.63 99.63 0.29 309053.00 781.12 24.24 0.00 1.15 0.06 0.07 375300 0.53 0.47 0.83 0.84 0.75 2.77 1.80 3.68 2.25 1.05 0.22 1.26
M-25 Massive Type I Core to rim profile 2 0.57 191600 26.54 0.86 0.00 1282.94 40.65 0.00 1615.45 51.80 0.07 137800 1284.50 44.18 0.26 310.64 9.74 0.02 3140.72 96.62 0.29 299212.00 790.27 24.53 0.00 1.83 0.08 0.08 375700 0.52 0.51 0.96 0.91 0.76 2.76 1.88 3.56 2.18 1.06 0.35 1.26
M-25 Massive Type I Core to rim profile 3 0.55 208100 25.90 0.84 0.00 1185.82 37.65 0.30 1622.45 52.07 0.10 141000 1389.40 47.86 0.10 307.72 9.66 0.01 3051.34 93.88 0.31 291958.00 801.17 24.87 0.01 1.49 0.07 0.08 374100 0.56 0.49 0.88 0.92 0.78 2.99 1.86 3.46 2.13 1.08 0.28 1.25
M-25 Massive Type I Core to rim profile 4 0.54 199400 32.70 1.06 0.04 1140.84 36.32 0.00 2386.27 76.61 0.00 136200 1435.10 49.55 0.22 323.30 10.15 0.02 3260.09 100.31 0.34 322451.00 1007.06 31.27 0.03 2.06 0.09 0.09 350300 0.54 0.62 0.85 1.35 0.75 3.09 1.96 3.70 2.35 1.35 0.39 1.17
M-25 Massive Type I Core to rim profile 5 0.54 205900 27.30 0.89 0.05 1188.74 37.88 0.18 1813.23 58.34 0.00 139800 1296.02 44.92 0.29 286.69 9.01 0.01 2890.31 88.94 0.30 299486.00 791.37 24.60 0.02 1.54 0.07 0.08 361800 0.56 0.52 0.89 1.03 0.77 2.79 1.74 3.28 2.18 1.06 0.29 1.21
M-25 Massive Type I Core to rim profile 6 0.55 207600 23.46 0.77 0.03 963.96 30.93 0.30 1375.68 44.45 0.05 142500 1306.10 45.60 0.18 306.85 9.66 0.00 3078.72 94.76 0.33 276118.00 769.84 23.96 0.01 1.45 0.07 0.08 382900 0.56 0.45 0.72 0.78 0.79 2.81 1.86 3.49 2.01 1.03 0.27 1.28
M-25 Massive Type I Core to rim profile 7 0.53 220700 24.49 0.80 0.00 983.58 31.65 0.00 1349.65 43.72 0.00 146900 1327.26 46.58 1.45 305.81 9.64 0.00 3091.20 95.15 1.03 263214.00 784.63 24.44 0.00 1.30 0.12 0.33 376100 0.60 0.47 0.73 0.76 0.81 2.85 1.85 3.51 1.92 1.05 0.25 1.26
M-25 Massive Type I Core to rim profile 8 0.52 224000 28.00 0.92 0.04 1181.88 37.69 0.22 2191.23 70.44 0.00 147700 1282.11 44.39 0.19 297.29 9.34 0.00 2895.22 89.09 0.36 276362.00 893.99 27.78 0.03 2.56 0.11 0.11 363800 0.60 0.53 0.88 1.24 0.81 2.76 1.80 3.29 2.02 1.20 0.48 1.22
M-25 Massive Type I Core to rim profile 9 0.58 188800 25.48 0.84 0.05 1344.75 42.91 0.35 1762.43 56.79 0.07 135500 1362.67 47.35 0.23 307.84 9.68 0.00 3275.99 100.81 0.31 301248.00 844.91 26.27 0.01 1.80 0.08 0.09 385200 0.51 0.49 1.00 1.00 0.75 2.93 1.87 3.72 2.20 1.14 0.34 1.29
M-25 Massive Type I Core to rim profile 10 0.56 198300 28.03 0.92 0.04 1354.72 43.29 0.23 1829.07 58.99 0.00 138600 1309.81 45.62 0.24 312.68 9.84 0.02 3357.95 103.34 0.34 292457.00 855.04 26.60 0.00 4.59 0.17 0.09 379000 0.54 0.53 1.01 1.04 0.76 2.82 1.90 3.81 2.13 1.15 0.87 1.27
M-25 Massive Type I Core to rim profile 11 0.55 209400 24.91 0.90 0.07 1011.19 33.07 1.02 1379.96 44.87 0.19 144200 1512.95 53.23 0.45 312.01 9.88 0.00 2968.05 91.40 0.88 275406.00 816.53 25.47 0.06 1.32 0.13 0.26 382000 0.57 0.47 0.75 0.78 0.79 3.25 1.89 3.37 2.01 1.10 0.25 1.28
M-27 Disseminate Type II Dark phase 12 0.5 219200 23.34 0.79 0.07 1772.10 57.21 0.18 2608.73 83.26 0.16 119500 3696.33 129.78 0.24 428.60 13.57 0.03 5919.67 183.75 0.47 338373.00 1433.99 44.29 0.04 1.64 0.09 0.13 331600 0.59 0.44 1.32 1.48 0.66 7.95 2.60 6.72 2.47 1.93 0.31 1.11
M-27 Disseminate Type II Dark phase 13 0.52 214000 25.48 0.85 0.07 1736.21 56.23 0.00 1969.29 62.96 0.10 126300 3418.43 120.25 0.00 431.27 13.67 0.00 6157.04 191.26 0.45 325686.00 1344.01 41.52 0.03 1.14 0.07 0.11 342600 0.58 0.49 1.29 1.12 0.70 7.35 2.61 6.99 2.38 1.81 0.22 1.15
M-27 Disseminate Type II Dark phase 14 0.5 218000 27.11 0.90 0.04 1906.55 62.08 0.24 2004.78 64.21 0.00 133800 3519.68 124.21 0.11 439.44 13.97 0.00 5793.51 180.26 0.45 315080.00 1342.56 41.49 0.06 1.59 0.08 0.10 327900 0.59 0.52 1.42 1.14 0.74 7.57 2.66 6.58 2.30 1.80 0.30 1.10
M-27 Disseminate Type II Dark phase 15 0.52 210600 23.31 0.78 0.00 1756.10 56.77 0.33 1948.80 62.27 0.24 126300 3322.25 116.78 0.29 408.99 12.96 0.00 5688.60 176.65 0.43 325686.00 1231.85 38.05 0.03 0.92 0.07 0.12 342600 0.57 0.44 1.31 1.10 0.70 7.14 2.48 6.46 2.38 1.66 0.17 1.15
M-27 Disseminate Type II Dark phase 16 0.51 220000 24.06 0.81 0.07 1868.73 60.77 0.31 2027.61 64.91 0.00 133900 3548.00 125.11 0.00 438.34 13.93 0.00 6462.53 200.98 0.47 309212.00 1341.45 41.45 0.04 1.35 0.08 0.11 339900 0.59 0.46 1.39 1.15 0.74 7.63 2.66 7.34 2.26 1.80 0.26 1.14
M-27 Disseminate Type II Dark phase 17 0.51 220000 25.46 0.85 0.08 1453.93 47.30 0.41 2187.07 69.97 0.15 133900 3485.99 122.82 0.24 455.98 14.48 0.03 6472.28 201.20 0.47 309212.00 1375.67 42.50 0.00 1.80 0.09 0.12 339900 0.59 0.48 1.08 1.24 0.74 7.50 2.76 7.35 2.26 1.85 0.34 1.14
M-27 Disseminate Type II Light phase 18 0.87 22800 6.33 0.28 0.06 1241.14 40.49 0.00 4017.82 128.30 0.00 37900 707.12 25.21 0.21 163.43 5.22 0.04 4673.93 145.16 0.44 707797.00 1514.24 46.80 0.02 1.25 0.09 0.12 221600 0.06 0.12 0.92 2.28 0.21 1.52 0.99 5.31 5.16 2.04 0.24 0.74
M-27 Disseminate Type II Light phase 19 0.86 24400 4.06 0.19 0.03 1077.85 35.23 0.00 1727.62 55.33 0.00 41600 560.75 20.02 0.11 97.80 3.14 0.01 2287.32 71.11 0.19 708060.00 708.18 21.91 0.01 0.39 0.04 0.05 215300 0.07 0.08 0.80 0.98 0.23 1.21 0.59 2.60 5.16 0.95 0.07 0.72
M-27 Disseminate Type II Light phase 20 0.85 25700 6.26 0.29 0.04 2040.53 66.91 0.22 3229.07 103.54 0.00 40400 697.54 25.05 0.23 149.36 4.81 0.02 3813.01 118.76 0.28 714659.00 1275.83 39.47 0.00 1.05 0.08 0.08 211100 0.07 0.12 1.52 1.83 0.22 1.50 0.91 4.33 5.21 1.71 0.20 0.71
M-27 Disseminate Type II Light phase 21 0.85 24000 5.44 0.25 0.00 1240.26 41.00 0.09 2284.54 73.37 0.05 40100 612.38 22.04 0.08 113.04 3.65 0.00 2646.10 82.48 0.22 726723.00 896.56 27.75 0.03 0.90 0.07 0.06 202400 0.06 0.10 0.92 1.29 0.22 1.32 0.69 3.00 5.30 1.21 0.17 0.68
M-27 Disseminate Type II Light phase 22 0.85 25700 7.37 0.09 0.05 2401.36 79.14 0.00 3944.45 126.66 0.08 40400 853.54 30.72 0.29 183.59 5.92 0.00 5027.03 156.76 0.37 714659.00 1597.28 49.43 0.03 1.02 0.09 0.10 211100 0.07 0.14 1.79 2.23 0.22 1.84 1.11 5.71 5.21 2.15 0.19 0.71
Los Guanacos M-17 Massive Type I Core to rim profile 23 0.66 145300 14.58 0.51 0.05 828.08 27.99 0.30 1520.64 48.28 0.00 113200 2488.58 85.15 0.35 331.83 10.35 0.02 7009.66 216.13 0.32 322461.00 750.28 23.27 0.02 5.45 0.20 0.09 413200 0.39 0.28 0.62 0.86 0.62 5.35 2.01 7.96 2.35 1.01 1.03 1.39
M-17 Massive Type I Core to rim profile 24 0.66 144900 14.19 0.47 0.05 834.77 28.14 0.48 1477.30 46.89 0.00 113800 2416.23 82.73 0.09 329.68 10.27 0.01 7202.08 222.10 0.30 324732.00 767.72 23.81 0.02 5.28 0.18 0.09 418900 0.40 0.26 0.65 0.80 0.65 5.41 2.13 9.23 2.26 1.09 1.20 1.44
M-17 Massive Type I Core to rim profile 25 0.66 145300 16.17 0.53 0.06 835.59 28.24 0.36 1583.84 50.30 0.09 113200 2512.02 86.13 0.24 343.06 10.69 0.02 7437.71 229.43 0.26 322461.00 788.11 24.45 0.03 5.01 0.17 0.07 413200 0.37 0.24 0.54 0.71 0.61 5.02 1.94 7.91 2.34 0.95 1.04 1.44
M-17 Massive Type I Core to rim profile 26 0.66 149400 13.52 0.47 0.06 873.18 29.80 0.22 1408.97 44.86 0.07 117100 2516.27 86.52 0.09 351.45 10.97 0.02 8128.12 250.81 0.32 309427.00 809.43 25.13 0.03 6.37 0.23 0.11 430900 0.33 0.21 0.50 0.62 0.59 4.93 1.99 8.44 2.27 0.89 1.12 1.55
M-17 Massive Type I Core to rim profile 27 0.67 139900 13.48 0.45 0.04 773.09 26.44 0.36 1374.84 43.79 0.06 113300 2356.08 81.12 0.26 326.82 10.20 0.01 7044.66 217.44 0.32 324931.00 738.50 22.93 0.03 5.58 0.19 0.09 428800 0.32 0.20 0.46 0.57 0.59 5.30 2.09 8.76 2.26 0.88 1.13 1.56
M-17 Massive Type I Core to rim profile 28 0.68 136500 12.59 0.43 0.06 721.16 24.79 0.25 1255.62 40.04 0.00 111500 2334.67 80.54 0.17 319.91 9.99 0.01 6965.14 215.05 0.31 320808.00 704.26 21.88 0.02 5.52 0.19 0.08 430500 0.39 0.27 0.62 0.84 0.63 5.20 2.00 8.17 2.37 1.03 1.00 1.40
M-17 Massive Type I Core to rim profile 29 0.72 123200 11.08 0.38 0.03 666.35 23.04 0.21 1087.66 34.74 0.00 107700 2292.06 79.24 0.13 327.68 10.23 0.02 7435.29 229.64 0.30 311370.00 664.68 20.66 0.03 5.92 0.20 0.09 461200 0.39 0.31 0.62 0.90 0.62 5.40 2.08 8.44 2.35 1.06 0.95 1.39
M-17 Massive Type I Core to rim profile 30 0.73 118000 10.32 0.36 0.04 615.93 21.45 0.44 1012.52 32.40 0.00 106900 2465.01 85.40 0.00 345.02 10.78 0.02 7717.01 238.42 0.32 309480.00 657.10 20.44 0.02 6.01 0.21 0.08 466000 0.38 0.26 0.58 0.78 0.62 5.07 1.98 8.00 2.37 0.99 1.05 1.44
M-17 Massive Type I Core to rim profile 31 0.62 168200 17.06 0.57 0.04 864.56 27.58 0.36 1918.02 60.51 0.00 115000 2771.91 91.60 0.20 358.56 11.44 0.02 7189.78 222.39 0.25 316451.00 818.31 25.55 0.03 4.89 0.17 0.07 407100 0.45 0.32 0.64 1.09 0.63 5.96 2.17 8.16 2.31 1.10 0.92 1.36
M-17 Massive Type I Core to rim profile 32 0.62 169300 18.79 0.61 0.04 932.52 29.44 0.32 2061.50 65.40 0.05 115000 2791.17 94.37 0.21 369.97 11.60 0.01 7522.15 230.69 0.27 311998.00 823.91 25.78 0.03 5.24 0.19 0.08 405200 0.46 0.36 0.69 1.17 0.63 6.00 2.24 8.54 2.28 1.11 0.99 1.36
M-17 Massive Type I Core to rim profile 33 0.62 169300 18.12 0.63 0.06 922.40 29.78 0.34 2071.85 65.12 0.00 115000 2853.08 92.41 0.12 363.27 11.84 0.02 7456.00 232.83 0.27 311998.00 825.25 25.75 0.04 5.46 0.18 0.07 405200 0.46 0.35 0.69 1.17 0.63 6.14 2.20 8.46 2.28 1.11 1.03 1.36
M-17 Massive Type I Core to rim profile 34 0.67 142000 14.96 0.51 0.06 954.68 30.53 0.22 1898.28 60.02 0.05 112500 2582.33 85.60 0.15 345.34 11.07 0.02 8215.41 254.40 0.27 321015.00 847.84 26.51 0.03 8.28 0.28 0.07 431800 0.38 0.28 0.71 1.07 0.62 5.55 2.09 9.33 2.34 1.14 1.56 1.45
M-17 Massive Type I Core to rim profile 35 0.68 134800 13.53 0.46 0.07 837.13 26.82 0.29 1673.66 52.97 0.08 109600 2464.79 81.80 0.16 330.09 10.61 0.01 7556.63 234.12 0.26 333861.00 783.65 24.52 0.02 6.88 0.23 0.07 427600 0.36 0.26 0.62 0.95 0.60 5.30 2.00 8.58 2.44 1.05 1.30 1.43
M-17 Massive Type I Core to rim profile 36 0.63 158100 16.43 0.56 0.06 802.15 25.77 0.37 1596.83 50.60 0.00 113400 2676.25 88.93 0.16 339.92 10.95 0.00 6918.36 214.47 0.27 325393.00 760.00 23.81 0.03 4.48 0.16 0.07 407100 0.35 0.29 0.67 1.00 0.59 5.17 2.01 8.71 2.45 1.07 1.90 1.46
M-17 Massive Type I Core to rim profile 37 0.64 153900 16.98 0.58 0.05 957.77 30.75 0.24 1877.62 59.54 0.00 112700 2589.89 86.17 0.10 352.33 11.38 0.02 7658.48 237.56 0.26 329666.00 857.55 26.88 0.03 4.40 0.15 0.07 409900 0.43 0.31 0.60 0.90 0.63 5.76 2.06 7.85 2.37 1.02 0.85 1.36
M-17 Massive Type I Core to rim profile 38 0.69 128900 14.18 0.49 0.07 878.19 28.27 0.36 1763.78 56.00 0.05 104900 2429.53 80.97 0.15 328.58 10.65 0.00 7645.34 237.31 0.25 337639.00 781.37 24.52 0.01 7.11 0.24 0.07 431600 0.42 0.32 0.71 1.06 0.62 5.57 2.14 8.69 2.40 1.15 0.83 1.37
M-17 Massive Type I Core to rim profile 39 0.69 130000 15.06 0.52 0.04 905.75 29.22 0.00 1763.24 56.06 0.05 107200 2403.88 80.25 0.07 331.51 10.78 0.00 7669.78 238.25 0.25 335410.00 799.14 25.11 0.03 10.07 0.33 0.06 434900 0.35 0.27 0.65 1.00 0.58 5.22 1.99 8.68 2.46 1.05 1.34 1.45
3317 Semimassive Type I Core to rim profile 40 0.6 199300 26.46 0.86 0.00 746.78 24.20 0.00 737.71 24.90 0.00 117600 2457.37 85.63 0.27 378.14 11.95 0.00 2568.00 79.55 0.29 240741.00 1196.71 37.03 0.03 0.33 0.04 0.09 447800 0.54 0.50 0.56 0.42 0.65 5.28 2.29 2.91 1.76 1.61 0.06 1.50
3317 Semimassive Type I Core to rim profile 41 0.6 200400 26.11 0.85 0.03 745.74 24.21 0.26 757.85 25.66 0.00 117500 2507.85 87.60 0.31 397.31 12.56 0.00 2730.89 84.63 0.30 244792.00 1204.09 37.26 0.01 0.43 0.04 0.08 450900 0.54 0.50 0.56 0.43 0.65 5.39 2.41 3.10 1.79 1.62 0.08 1.51
3317 Semimassive Type I Core to rim profile 42 0.62 188100 26.06 0.85 0.00 949.02 30.77 0.16 760.69 25.83 0.06 116100 2341.54 81.99 0.20 372.08 11.78 0.00 2574.03 79.81 0.25 241411.00 1255.32 38.84 0.00 0.43 0.04 0.08 466100 0.51 0.50 0.71 0.43 0.64 5.04 2.26 2.92 1.76 1.69 0.08 1.56
3317 Semimassive Type I Core to rim profile 43 0.61 192300 27.46 0.89 0.05 905.69 29.42 0.00 851.35 28.99 0.00 115700 2340.43 82.16 0.29 377.94 11.97 0.00 2540.02 78.78 0.27 245062.00 1240.71 38.39 0.02 0.48 0.04 0.07 450200 0.52 0.52 0.67 0.48 0.64 5.03 2.29 2.88 1.79 1.67 0.09 1.51
3317 Semimassive Type I Core to rim profile 44 0.71 140700 19.43 0.62 0.00 1099.71 38.25 0.00 667.68 21.68 0.00 102100 2097.87 69.48 0.32 371.88 11.95 0.02 2842.66 96.10 0.23 254639.00 1141.28 34.59 0.00 1.04 0.06 0.07 505400 0.38 0.37 0.82 0.38 0.56 4.51 2.25 3.23 1.86 1.53 0.20 1.69
3317 Semimassive Type I Core to rim profile 45 0.69 148000 24.64 0.80 0.00 1448.90 47.06 0.11 837.64 28.73 0.06 103600 2110.38 74.49 0.30 391.38 12.42 0.00 3171.56 98.46 0.25 266614.00 1220.03 37.76 0.01 1.23 0.06 0.07 493900 0.40 0.47 1.08 0.47 0.57 4.54 2.37 3.60 1.94 1.64 0.23 1.66
3317 Semimassive Type I Core to rim profile 46 0.73 130100 18.96 0.64 0.03 1179.18 35.85 0.15 633.94 23.00 0.10 98000 1973.99 74.26 0.35 376.93 11.81 0.01 3097.04 88.29 0.24 258276.00 1117.90 35.32 0.01 1.09 0.06 0.07 516600 0.35 0.36 0.88 0.36 0.54 4.25 2.28 3.52 1.88 1.50 0.21 1.73
2226 Massive Type III Dark phase 47 0.43 277500 27.82 0.46 0.03 309.04 39.06 0.00 1781.09 180.44 0.00 156500 5532.41 34.63 0.17 664.01 11.81 0.00 3401.44 148.09 0.20 269013.00 598.53 38.22 0.01 1.03 0.15 0.07 307100 0.75 0.53 0.23 1.01 0.86 11.90 4.02 3.86 1.96 0.80 0.19 1.03
2226 Massive Type III Dark phase 48 0.43 264200 26.95 0.95 0.05 320.95 10.03 0.00 1961.02 56.68 0.10 144500 5124.63 186.61 0.00 616.49 20.65 0.00 3243.76 105.33 0.45 299455.00 609.97 18.51 0.01 1.25 0.08 0.15 297900 0.71 0.51 0.24 1.11 0.80 11.02 3.74 3.68 2.18 0.82 0.24 1.00
2226 Massive Type III Dark phase 49 0.41 292100 28.20 0.43 0.03 464.05 37.42 0.00 2333.45 164.27 0.00 163100 5678.98 33.58 0.17 691.98 11.08 0.01 3858.47 138.80 0.18 248144.00 730.87 34.81 0.00 2.02 0.14 0.06 308600 0.79 0.54 0.35 1.32 0.90 12.21 4.19 4.38 1.81 0.98 0.38 1.03
2226 Massive Type III Dark phase 50 0.42 291900 30.13 0.91 0.03 341.67 10.30 0.00 1993.52 62.42 0.00 141200 6024.30 172.75 0.32 681.36 19.17 0.02 3485.58 100.52 0.33 253634.00 630.13 18.86 0.00 1.19 0.07 0.11 316800 0.79 0.57 0.25 1.13 0.78 12.96 4.13 3.96 1.85 0.85 0.22 1.06
2226 Massive Type III Dark phase 51 0.43 271600 28.81 0.96 0.09 525.95 14.78 0.00 2877.11 74.31 0.00 150000 5118.48 191.41 0.36 699.14 21.51 0.00 4196.73 119.62 0.36 284785.00 835.77 22.59 0.04 1.84 0.10 0.11 301000 0.73 0.55 0.39 1.63 0.83 11.01 4.24 4.76 2.08 1.12 0.35 1.01
2226 Massive Type III Dark phase 52 0.43 277500 27.74 0.42 0.02 302.54 35.39 0.00 1852.41 148.45 0.00 155500 5379.28 33.76 0.16 630.33 10.59 0.01 3294.48 132.52 0.18 273419.00 605.51 32.56 0.01 1.27 0.13 0.06 308600 0.75 0.53 0.23 1.05 0.86 11.57 3.82 3.74 1.99 0.81 0.24 1.03
2226 Massive Type III Light phase 53 0.78 45300 13.68 0.46 0.04 1254.99 37.25 0.00 5687.40 159.80 0.00 56200 1024.59 32.24 0.11 380.13 11.11 0.01 4784.75 139.03 0.18 655286.00 1237.58 34.93 0.01 4.44 0.14 0.06 242900 0.12 0.26 0.93 3.22 0.31 2.20 2.30 5.43 4.78 1.66 0.84 0.81
2226 Massive Type III Light phase 54 0.78 43700 12.82 0.51 0.03 1202.29 42.93 0.09 5172.42 185.16 0.05 54500 994.20 35.00 0.13 356.45 12.23 0.00 4481.39 157.78 0.21 671858.00 1127.16 39.58 0.01 4.07 0.16 0.07 233100 0.12 0.24 0.90 2.93 0.30 2.14 2.16 5.09 4.90 1.52 0.77 0.78
2226 Massive Type III Light phase 55 0.77 45700 12.48 1.06 0.07 1136.24 11.26 0.00 4666.05 63.78 0.00 58700 1000.25 203.07 0.41 340.61 21.21 0.00 4273.07 108.29 0.43 670644.00 1054.42 19.50 0.03 3.81 0.09 0.15 232000 0.12 0.24 0.85 2.64 0.32 2.15 2.06 4.85 4.89 1.42 0.72 0.78
2226 Massive Type III Light phase 56 0.77 45600 13.34 0.50 0.03 1195.46 42.00 0.13 5019.42 181.40 0.09 56800 954.87 36.55 0.14 357.34 12.67 0.01 4481.07 155.00 0.23 675398.00 1130.96 39.58 0.01 4.17 0.16 0.08 228800 0.12 0.25 0.89 2.84 0.31 2.05 2.17 5.09 4.93 1.52 0.79 0.77
2226 Massive Type III Light phase 57 0.76 49700 14.88 0.98 0.00 1377.75 16.65 0.00 5812.26 91.93 0.00 61700 1036.55 172.37 0.26 393.24 21.74 0.02 5082.75 130.49 0.33 652702.00 1281.69 25.82 0.02 4.67 0.09 0.11 240800 0.13 0.28 1.03 3.29 0.34 2.23 2.38 5.77 4.76 1.72 0.88 0.81
2226 Massive Type III Light phase 58 0.76 52400 14.47 0.96 0.06 1346.43 9.79 0.40 5686.00 59.31 0.00 59900 1082.67 181.17 0.12 407.40 19.61 0.00 4987.94 102.50 0.36 642703.00 1281.79 18.72 0.05 4.66 0.08 0.11 245800 0.14 0.28 1.00 3.22 0.33 2.33 2.47 5.66 4.69 1.72 0.88 0.82
2226 Massive Type III Light phase 59 0.79 38300 9.42 0.37 0.07 875.82 27.67 0.29 3700.48 118.45 0.00 53400 846.47 28.72 0.20 280.28 8.75 0.00 3097.27 96.44 0.36 698084.00 830.06 25.66 0.02 2.91 0.13 0.11 217600 0.10 0.18 0.65 2.10 0.29 1.82 1.70 3.52 5.09 1.12 0.55 0.73

(*) = Data from electron-microprobe

Mdl= Minimum detection limits (99% confidence)

N=Normalized to chromite from MORB [Pagé and Barnes 2009; Econ. Geol.104, 997-1018]

How to cite this article: Colás, V., Subías, I., González-Jiménez, J. M., Proenza, J. A., Fanlo, I., Camprubí, A., Griffin, W. L., Gervilla, F., O’Reilly, S. Y., Escayola, M., 2020, Metamorphic fingerprints of Fe-rich chromitites from the Eastern Pampean Ranges, Argentina: Boletín de la Sociedad Geológica Mexicana, 72 (3), A080420. http://dx.doi.org/10.18268/BSGM2020v72n3a080420

Received: September 27, 2019; Accepted: April 08, 2020

*Corresponding author: (V. Colás) vcolas86@gmail.com

Creative Commons License This is an open-access article distributed under the terms of the Creative Commons Attribution License