SciELO - Scientific Electronic Library Online

 
vol.8 número48 índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


RIIIT. Revista internacional de investigación e innovación tecnológica

versión On-line ISSN 2007-9753

Resumen

ORTIZ-RIVERA, A. et al. Design of a new cutting tool for drill bits. RIIIT. Rev. int. investig. innov. tecnol. [online]. 2021, vol.8, n.48, pp.1-15.  Epub 03-Nov-2025. ISSN 2007-9753.

Traditional manufacturing techniques applied in the Mexican Mining Industry require a high number of experimental tests, long periods of machining time used, and high economic costs are generated. To solve this problem, it is proposed to use the computational simulation technique, which turns out to be a faster, low-cost, highly accurate, simple, and reliable technique to evaluate the performance of a cutting tool. In addition, with this technique, it is possible to simulate different geometries during the machining process, without generating economic losses and increasing the test accuracy. For this reason, the objective of this work was to design and validate a new cutting tool for the internal string of drill bits used in mining. The methodology used was through the implementation of the computational simulation technique and later the manufacture of the new tool. Which was mounted on a computerized numerical control lathe, and it was simultaneously introduced into the drill bit to perform the machining of the internal chord. To find the optimal geometry of such a tool, the finite element and design of experiment methods are used. Among the main results of this work is to identify the model that showed the best maximum effort performance, and that allows us to have a high safety factor. The deformation shown by the new cutting tool allows the manufactured parts to have adequate dimensional tolerances for their fit in the drill bit. The validation of the cutting tool design was carried out considering the cutting force that is generated in the machining process.

Palabras llave : Computer-Aided Design; Cutting Tools; Drill Bits and Computational Simulation.

        · resumen en Español     · texto en Español     · Español ( pdf )