SciELO - Scientific Electronic Library Online

vol.65 número1Synthesis of Pt-Ni/CNT Cathodic Catalyst and its Application in a PEM fuel CellMTO Synthesis and Characterization of ZnAPO-34 and SAPO-34: Effect of Zn on the Acidity and Catalytic Activity in the MTO Reaction índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados




Links relacionados

  • Não possue artigos similaresSimilares em SciELO


Journal of the Mexican Chemical Society

versão impressa ISSN 1870-249X


HUIRACHE-ACUNA, R.; ALONSO-NUNEZ, G.; VAZQUEZ-GUERRERO, A.  e  MARTINEZ-SANCHEZ, R.. Mechanical Alloying: an Alternative Method to Produce NiMoW HDS Catalysts. J. Mex. Chem. Soc [online]. 2021, vol.65, n.1, pp.52-60.  Epub 04-Jun-2021. ISSN 1870-249X.

In this work, quaternary alloys of Ni-Mo-W-Al were prepared by mechanical alloying. In addition, a process of chemical extraction by alkaline leaching was applied to remove aluminum in order to increase the specific surface area (SSA) and to generate porous materials, which were tested in the dibenzothiophene (DBT) hydrodesulfurization (HDS) reaction to determine their catalytic activity and selectivity. This study reveals the impact of the surface and structural modification of quaternary alloys on the catalyst performance and serves as well, as guidance for the design of novel HDS catalysts.

Palavras-chave : Alloys; mechanical alloying; hydrodesulfurization; catalysts.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )