Resumo

POLITO-LUCAS, J. Alberto; GARCIA-VAZQUEZ, Valentin; GONZALEZ, Ana L.  e  FLORES-RUIZ, Francisco Javier. Tailoring optical response in nanostructured bilayers: Effects of surface roughness and layer thickness on NbN/Nb and TiN/Ti. Superf. vacío [online]. 2024, vol.37, e240201.  Epub 19-Fev-2024. ISSN 1665-3521.  https://doi.org/10.47566/2024_syv37_1-240201.

Numerical calculations were performed on NbN/Nb and TiN/Ti nanostructured bilayers. Discrete dipole approximation implemented in the DDSCAT code was utilized. In order to design a TUC (Target Unit Cell) with realistic surface-roughness pattern, Atomic Force Microscope images of 100 ±10 nm Nb thin films were used. The optical properties of nanostructured bilayers (60-100 nm thickness with a ±10 nm surface roughness) were calculated, keeping the interface between the layers as smooth flat surfaces. For the NbN/Nb nanostructure with a thickness between 100 ±10 nm, and 70 ±10 nm, in a wavelength range between 200 and 350 nm, the reflectance and absorptance show a nearly flat spectrum with an intensity of 20% and 80%, respectively. For larger wavelengths, absorptance decays smoothly. In contrast, for the 60 ±10 nm bilayer, the absorptance decays faster. For the TiN/Ti nanostructure, at 415 nm, a relative maximum in the reflectance, and a minimum in absorptance, are observed. The critical value of the absorbed light spectra begins to shift to higher wavelengths as the thickness of the TiN layer increases. We demonstrate that adding a rough nitride layer on top of its metallized layer drastically modifies the optical response of the nanostructured bilayer, an interesting result for plasmonics and nanoelectronics applications.

Palavras-chave : Niobium; Titanium; nitrides; thin films; roughness pattern; reflection; transmission.

        · texto em Inglês     · Inglês ( pdf )