<?xml version="1.0" encoding="ISO-8859-1"?><article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<front>
<journal-meta>
<journal-id>1665-6423</journal-id>
<journal-title><![CDATA[Journal of applied research and technology]]></journal-title>
<abbrev-journal-title><![CDATA[J. appl. res. technol]]></abbrev-journal-title>
<issn>1665-6423</issn>
<publisher>
<publisher-name><![CDATA[Universidad Nacional Autónoma de México, Instituto de Ciencias Aplicadas y Tecnología]]></publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id>S1665-64232023000200162</article-id>
<article-id pub-id-type="doi">10.22201/icat.24486736e.2023.21.2.1618</article-id>
<title-group>
<article-title xml:lang="en"><![CDATA[Influence of MgO &amp; SiC on mechanical and wear characteristics of AA6061 hybrid matrix composites synthesized by stir casting]]></article-title>
</title-group>
<contrib-group>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Hariharan]]></surname>
<given-names><![CDATA[S.R.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Sakthi]]></surname>
<given-names><![CDATA[S.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Mahendran]]></surname>
<given-names><![CDATA[S.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Jayasuthakar]]></surname>
<given-names><![CDATA[S.T]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
</contrib-group>
<aff id="Af1">
<institution><![CDATA[,University college of Engineering Department of Mechanical Engineering ]]></institution>
<addr-line><![CDATA[Thirukuvalai ]]></addr-line>
<country>India</country>
</aff>
<aff id="Af2">
<institution><![CDATA[,University college of Engineering Department of Mechanical Engineering ]]></institution>
<addr-line><![CDATA[Thirukuvalai ]]></addr-line>
<country>India</country>
</aff>
<aff id="Af3">
<institution><![CDATA[,University college of Engineering Visiting Faculty Department of Mechanical Engineering]]></institution>
<addr-line><![CDATA[Thirukuvalai ]]></addr-line>
<country>India</country>
</aff>
<pub-date pub-type="pub">
<day>00</day>
<month>00</month>
<year>2023</year>
</pub-date>
<pub-date pub-type="epub">
<day>00</day>
<month>00</month>
<year>2023</year>
</pub-date>
<volume>21</volume>
<numero>2</numero>
<fpage>162</fpage>
<lpage>168</lpage>
<copyright-statement/>
<copyright-year/>
<self-uri xlink:href="http://www.scielo.org.mx/scielo.php?script=sci_arttext&amp;pid=S1665-64232023000200162&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://www.scielo.org.mx/scielo.php?script=sci_abstract&amp;pid=S1665-64232023000200162&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://www.scielo.org.mx/scielo.php?script=sci_pdf&amp;pid=S1665-64232023000200162&amp;lng=en&amp;nrm=iso"></self-uri><abstract abstract-type="short" xml:lang="en"><p><![CDATA[Abstract Aluminium metal matrix composites (AMMC&#8217;s) have achieved enormous comprehensive acknowledgement for aerospace and structural applications, due to its excellent corrosion resistant, good wear-resistant, high strength and light weight. In this paper, the experimental study deals with investigation influence of reinforcement (magnesium oxide and silicon carbide) particles on various mechanical properties of aluminium alloy (Al 6061). AMMC was fabricated by stir casting method. The Ex-situ method was used to fabricate because of its less complexity. The MMC were prepared with a different weight percentage of reinforcement particles such as 3%, 6% and 9%. After the fabrication, the ingots were machined for preparation of test samples. The tensile, compression, Impact and hardness test were taken to study the mechanical properties and effect of varying weight percentage of reinforcements. As the outcome, the tensile and compression strength were progressively increase with addition of magnesium oxide and silicon carbide.]]></p></abstract>
<kwd-group>
<kwd lng="en"><![CDATA[Aluminium alloy (Al 6061)]]></kwd>
<kwd lng="en"><![CDATA[magnesium oxide]]></kwd>
<kwd lng="en"><![CDATA[silicon carbide]]></kwd>
<kwd lng="en"><![CDATA[stir casting]]></kwd>
<kwd lng="en"><![CDATA[ex-situ]]></kwd>
<kwd lng="en"><![CDATA[mechanical properties]]></kwd>
</kwd-group>
</article-meta>
</front><back>
<ref-list>
<ref id="B1">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Abdizadeh]]></surname>
<given-names><![CDATA[H.]]></given-names>
</name>
<name>
<surname><![CDATA[Ebrahimifard]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
<name>
<surname><![CDATA[Baghchesara]]></surname>
<given-names><![CDATA[M. A.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Investigation of microstructure and mechanical properties of MgO reinforced Al composites manufactured by stir casting and powder metallurgy methods: A comparative study]]></article-title>
<source><![CDATA[Composites: Part B Engineering]]></source>
<year>2014</year>
<volume>56</volume>
<page-range>217-21</page-range></nlm-citation>
</ref>
<ref id="B2">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Çalin]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
<name>
<surname><![CDATA[Muharrem]]></surname>
<given-names><![CDATA[P.]]></given-names>
</name>
<name>
<surname><![CDATA[Çitak]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
<name>
<surname><![CDATA[&#350;eker]]></surname>
<given-names><![CDATA[U.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[The Effect of Reinforcement Ratio on Infiltration Behavior in Vacuum Infiltration of MgO-Al Composites With Lower Reinforcement]]></article-title>
<source><![CDATA[Journal of Polytechnic-Politeknik Dergisi]]></source>
<year>2011</year>
<volume>20</volume>
<numero>4</numero>
<issue>4</issue>
<page-range>173-7</page-range></nlm-citation>
</ref>
<ref id="B3">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Chennakesava Reddy]]></surname>
<given-names><![CDATA[A.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Mechanical properties and fracture behavior of 6061/SiCp Metal Matrix Composites Fabricated by Low Pressure Die Casting Process]]></article-title>
<source><![CDATA[Journal of Manufacturing Technology Research]]></source>
<year>2009</year>
<volume>1</volume>
<numero>3/4</numero>
<issue>3/4</issue>
<page-range>273-86</page-range></nlm-citation>
</ref>
<ref id="B4">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Davis]]></surname>
<given-names><![CDATA[J.R.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Aluminum &amp; Aluminum Alloy Handbook]]></article-title>
<source><![CDATA[ASM International]]></source>
<year>1993</year>
<page-range>351-416</page-range></nlm-citation>
</ref>
<ref id="B5">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Devi]]></surname>
<given-names><![CDATA[C. N.]]></given-names>
</name>
<name>
<surname><![CDATA[Mahesh]]></surname>
<given-names><![CDATA[V.]]></given-names>
</name>
<name>
<surname><![CDATA[Selvaraj]]></surname>
<given-names><![CDATA[N.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Tensile and Impact behaviour of Al-Sic-Zn-Cu Metal Matrix Composite]]></article-title>
<source><![CDATA[Research Journal of Engineering Sciences]]></source>
<year>2014</year>
<volume>3</volume>
<numero>2</numero>
<issue>2</issue>
<page-range>17-22</page-range></nlm-citation>
</ref>
<ref id="B6">
<nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Foltz]]></surname>
<given-names><![CDATA[J.V.]]></given-names>
</name>
<name>
<surname><![CDATA[Blackmon]]></surname>
<given-names><![CDATA[C.M.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Metal-Matrix Composites]]></article-title>
<source><![CDATA[Properties and Selection: Nonferrous Alloys and Special-Purpose Materials]]></source>
<year>1990</year>
<volume>2</volume>
<page-range>903-12</page-range><publisher-name><![CDATA[ASM Handbook Committee, ASM International]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B7">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Gandra]]></surname>
<given-names><![CDATA[J.]]></given-names>
</name>
<name>
<surname><![CDATA[Miranda]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
<name>
<surname><![CDATA[Vilaca]]></surname>
<given-names><![CDATA[P.]]></given-names>
</name>
<name>
<surname><![CDATA[Velhinho]]></surname>
<given-names><![CDATA[A.]]></given-names>
</name>
<name>
<surname><![CDATA[Teixeira]]></surname>
<given-names><![CDATA[J. P.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Functionally graded materials produced by friction stir processing]]></article-title>
<source><![CDATA[Journal of Materials Processing Technology]]></source>
<year>2011</year>
<volume>211</volume>
<numero>11</numero>
<issue>11</issue>
<page-range>1659-68</page-range></nlm-citation>
</ref>
<ref id="B8">
<nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Gauthier]]></surname>
<given-names><![CDATA[M. M.]]></given-names>
</name>
</person-group>
<source><![CDATA[Engineered materials handbook]]></source>
<year>1995</year>
<volume>1</volume>
<publisher-name><![CDATA[ASM International]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B9">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Kingston]]></surname>
<given-names><![CDATA[V.L.]]></given-names>
</name>
<name>
<surname><![CDATA[Prabhakar]]></surname>
<given-names><![CDATA[John]]></given-names>
</name>
<name>
<surname><![CDATA[Senthil kuma]]></surname>
<given-names><![CDATA[N.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[A Study on Mechanical Characterisation of Hybrid Metal Matrix Composite]]></article-title>
<source><![CDATA[International Journal of Engineering Research and Applications]]></source>
<year>2014</year>
<volume>3</volume>
<numero>4</numero>
<issue>4</issue>
<page-range>1202-9</page-range></nlm-citation>
</ref>
<ref id="B10">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Lashgari]]></surname>
<given-names><![CDATA[H. R.]]></given-names>
</name>
<name>
<surname><![CDATA[Zangeneh]]></surname>
<given-names><![CDATA[S.]]></given-names>
</name>
<name>
<surname><![CDATA[Shahmir]]></surname>
<given-names><![CDATA[H.]]></given-names>
</name>
<name>
<surname><![CDATA[Saghafi]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<name>
<surname><![CDATA[Emamy]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Heat treatment effect on the microstructure, tensile properties and dry sliding wear behavior of A356-10% B4C cast composites]]></article-title>
<source><![CDATA[Materials &amp; Design]]></source>
<year>2010</year>
<volume>31</volume>
<numero>9</numero>
<issue>9</issue>
<page-range>4414-22</page-range></nlm-citation>
</ref>
<ref id="B11">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Lee]]></surname>
<given-names><![CDATA[C. J.]]></given-names>
</name>
<name>
<surname><![CDATA[Huang]]></surname>
<given-names><![CDATA[J. C.]]></given-names>
</name>
<name>
<surname><![CDATA[Hsieh]]></surname>
<given-names><![CDATA[P. J.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Mg based nano-composites fabricated by friction stir processing]]></article-title>
<source><![CDATA[Scripta Materialia]]></source>
<year>2006</year>
<volume>54</volume>
<numero>7</numero>
<issue>7</issue>
<page-range>1415-20</page-range></nlm-citation>
</ref>
<ref id="B12">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Manna]]></surname>
<given-names><![CDATA[A.]]></given-names>
</name>
<name>
<surname><![CDATA[Bhattacharyya]]></surname>
<given-names><![CDATA[B.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[A study on different tooling systems during machining of Al/SiC-MMC]]></article-title>
<source><![CDATA[Journal of Materials Processing Technology]]></source>
<year>2002</year>
<volume>123</volume>
<numero>3</numero>
<issue>3</issue>
<page-range>476-82</page-range></nlm-citation>
</ref>
<ref id="B13">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Ramesh]]></surname>
<given-names><![CDATA[B. T.]]></given-names>
</name>
<name>
<surname><![CDATA[Arun]]></surname>
<given-names><![CDATA[K. M.]]></given-names>
</name>
<name>
<surname><![CDATA[Swamy]]></surname>
<given-names><![CDATA[R. P.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Dry sliding wear test conducted on pin-on-disk testing setup for Al6061-sic metal matrix composites fabricated by powder metallurgy]]></article-title>
<source><![CDATA[International Journal of Innovative Science, Engineering &amp; Technology]]></source>
<year>2015</year>
<volume>2</volume>
<numero>6</numero>
<issue>6</issue>
<page-range>264-70</page-range></nlm-citation>
</ref>
<ref id="B14">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Ray]]></surname>
<given-names><![CDATA[S.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Synthesis of cast metal matrix particulate composites]]></article-title>
<source><![CDATA[Journal of materials science]]></source>
<year>1993</year>
<volume>28</volume>
<page-range>5397-413</page-range></nlm-citation>
</ref>
<ref id="B15">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Seo]]></surname>
<given-names><![CDATA[Y. H.]]></given-names>
</name>
<name>
<surname><![CDATA[Kang]]></surname>
<given-names><![CDATA[C. G.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Effects of hot extrusion through a curved die on the mechanical properties of SiCp/Al composites fabricated by melt-stirring]]></article-title>
<source><![CDATA[Composites Science and Technology]]></source>
<year>1999</year>
<volume>59</volume>
<numero>5</numero>
<issue>5</issue>
<page-range>643-54</page-range></nlm-citation>
</ref>
<ref id="B16">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Silva]]></surname>
<given-names><![CDATA[C. R. M.]]></given-names>
</name>
<name>
<surname><![CDATA[Nono]]></surname>
<given-names><![CDATA[M. C. A.]]></given-names>
</name>
<name>
<surname><![CDATA[Reis]]></surname>
<given-names><![CDATA[D. A. P.]]></given-names>
</name>
<name>
<surname><![CDATA[Hwang]]></surname>
<given-names><![CDATA[M. K.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Compressive creep of hot pressed silicon carbide]]></article-title>
<source><![CDATA[Materials Science and Engineering: A]]></source>
<year>2010</year>
<volume>527</volume>
<numero>18</numero>
<issue>18</issue>
<page-range>4891-6</page-range></nlm-citation>
</ref>
<ref id="B17">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Ward]]></surname>
<given-names><![CDATA[P. J.]]></given-names>
</name>
<name>
<surname><![CDATA[Atkinson]]></surname>
<given-names><![CDATA[H. V.]]></given-names>
</name>
<name>
<surname><![CDATA[Anderson]]></surname>
<given-names><![CDATA[P. R. G.]]></given-names>
</name>
<name>
<surname><![CDATA[Elias]]></surname>
<given-names><![CDATA[L. G.]]></given-names>
</name>
<name>
<surname><![CDATA[Garcia]]></surname>
<given-names><![CDATA[B.]]></given-names>
</name>
<name>
<surname><![CDATA[Kahlen]]></surname>
<given-names><![CDATA[L.]]></given-names>
</name>
<name>
<surname><![CDATA[Rodriguez-Ibabe]]></surname>
<given-names><![CDATA[J. M.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Semi-solid processing of novel MMCs based on hypereutectic aluminium-silicon alloys]]></article-title>
<source><![CDATA[Acta Materialia]]></source>
<year>1996</year>
<volume>44</volume>
<numero>5</numero>
<issue>5</issue>
<page-range>1717-27</page-range></nlm-citation>
</ref>
</ref-list>
</back>
</article>
