S. Calixto, Gil. A. Pérez-Herrera, M. Strojnik, M. Servin, Zacarias-Malacara & Reyna A. Duarte-Quiroga

Centro de Investigaciones en Óptica, A. C., Apartado Postal 1-948, 37000 León, Gto., México. scalixto@cio.mx

Abstract

A simple method to fabricate infrared (λ = 10.6 μm) diffractive optical elements that work in a transmission mode is presented. A laser-writing instrument completely under computer control has been built to demonstrate the feasibility of this method. Several diffractive elements, fabricated using the laser-writing instrument, are described.

Keywords: Diffractive elements, infrared, infrared components, transmissive optics.

Resumen

Se presenta un método sencillo para fabricar elementos ópticos difractores para infrarrojo (λ =10.6 μm). Estos elementos trabajan en transmisión. Para la fabricación de ellos se construyó un instrumento de escritura por medio de luz láser controlado por computadora. Varios de los elementos ópticos difractores fueron evaluados.

DESCARGAR ARTÍCULO EN FORMATO PDF

6. REFERENCES

[1] Missig M.D. and Morris G.M., Diffractive Optics Applied to Eyepiece Design, Applied Optics, Vol. 34, No. 14, May, 1995, pp. 2452-2461.         [ Links ]

[2] Hudson R.D., Jr., Optics, in Infrared System Engineering, John Wiley & Sons, 1969, pp. 216-217.         [ Links ]

[3] Marquet L.C., Transmission Diffraction Grating Attenuator for Analysis of High Power Laser Beam Quality, Applied Optics, Vol. 10, No. 4, April, 1971, pp. 960-961.         [ Links ]

[4] Ilcisin K.J. and Fedosejevs R., Direct Production of Gratings on Plastic Substrates Using 248-nm KrF Laser Radiation, Applied Optics, Vol. 26, No. 2, January, 1987, pp. 396-400.         [ Links ]

[5] Ming H., Wu Y., Xie J. and Nakajima T., Fabrication of Holographic Microlenses Using a Deep UV Lithographed Zone Plate, Applied Optics, Vol. 29, No. 34, December, 1990, pp. 5111-5114.         [ Links ]

[6] Calixto S., Polymers as Mid-Infrared Holographic Recording Media, Polymers in Information Storage Technology, K.L. Mital, ed., Plenum Press, 1989, pp. 217-225, New York, U.S.A., February.         [ Links ]

[7] Clark P.P. and Londono C., Production of Kinoforms by Single Point Diamond Machining, Optics News, Vol. 15, No. 12, December, 1989, pp. 39-40.         [ Links ]

[8] Boiko Y., Solovjev V.S., Calixto S. and Lougnot D.J., Dry Photopolymer Films for Computer-Generated Infrared Radiation Focusing Elements, Applied Optics, Vol. 33, No. 5, February, 1994, pp. 787-791.         [ Links ]

[9] Gale M.T., Rossi M., Schutz H., Ebets P., Herzig H.P. and Prongue D., Continuous- Relief Diffractive Optical Elements for Two-Dimensional Array Generation, Applied Optics, Vol. 32, No. 14, May, 1993, pp. 2526-2533.         [ Links ]

[10] Krackhardt U.W., Schwider J., Schrader M. and Streibl N., Synthetic Holograms Written by a Laser Pattern Generator, Optical Engineering, Vol. 32, No. 4, April, 1993, pp. 781-785.         [ Links ]

[11] Fujita T., Nishihara H. and Koyama J., Fabrication Of Micro Lenses Using Electron-Beam Lithography, Optics Letters, Vol. 6, No. 12, December, 1981, pp. 613-615.         [ Links ]

[12] Fujita T., Nishihara H. and Koyama J., Blazed Gratings and Fresnel Lenses Fabricated by Electron-Beam Lithography, Optics Letters, Vol. 7, No. 12, December, 1982, pp. 578-590.         [ Links ]

[14] Newman D.M., Hawley R.W., Goeckel D.L., Crawford R.D., Abraham S. and Gallagher N.C., Efficient Storage, Computation, and Exposure of Computer Generated Holograms by Electron Beam Lithography, Applied Optics, Vol. 32, No. 14, May, 1993, pp. 2555-2565.         [ Links ]

[15] Daschner W., Larsson M. and Lee S.H., Fabrication of Monolithic Diffractive Optical Elements by the Use of e-Beam Direct Write on an Analog Resist and a Single Chemically Assisted Ion-Beam-Etching Step, Applied Optics, Vol. 34, No. 14, May, 1995, pp. 2534-2539.         [ Links ]

[16] Cox J.A., Fritz B. and Werner T., Process Error Limitations on Binary Optics Performance, Computer and Optically Generated Holographic Optics, 1991, pp. 80-88, Bellinsham, Washington, U.S.A.         [ Links ]

[17] Miller J. M., Taghizadeh M.R., Turunen J. and Ross N., Multilevel-Grating Array Generators: Fabrication Error Analysis And Experiments, Applied Optics, Vol. 32, No. 14, May, 1993, pp. 2519-2525.         [ Links ]

[18] Duparre M., Golub M.A., Ludge B., Pavelyev V.S., Soifer V.A., Uspleniev G.V. and Volotovskii S.G., Investigation of Computer-Generated Diffractive Beam Shapers for Flattening of Single-Modal CO₂ Laser Beams, Applied Optics, Vol. 34, No. 14, May, 1995, pp. 2489-2497.         [ Links ]

[19] Feldman M.R., Diffracted Optics Moves into the Commercial Arena, Laser Focus, Vol. 30, No. 6, June, 1994, pp. 145-151.         [ Links ]

[20] Brown B.R. and Lohmann A.W., Complex Spatial Filtering with Binary Masks, Applied Optics, Vol. 5, No. 6, June, 1966, pp. 967-969.         [ Links ]

[21] Bryngdahl O. and Wyrowski F., Digital Holography-Computer-Generated Holograms, Progress in Optics XXVII, 1990, pp. 220-252, Amsterdam, North Holland.         [ Links ]

[22] Oriel Corporation, Stratford, CT, USA.

[23] Metha P.C., Bahn C. and Hraydanath R., Multiple Imaging by Lensless Fourier Transform Holography, Journal of Optics, Vol. 10, No. 4, February, 1979, pp. 133-137.         [ Links ]

[24] Calixto S., Dry Polymer for Holographic Recording, Applied Optics, Vol. 26, No. 18, September, 1987, pp. 3904-3910.         [ Links ]

[25] Hasman E., Davidson N. and Friesem A.A., Efficient Multilevel Phase Holograms for CO₂ Lasers, Optics Letters, Vol. 16, No. 6, March, 1991, pp. 423-425.         [ Links ]

[26] Hutley M.C., Stevens R.F. and Wilson S.J., Manufacture of Blazed Zone Plates in Germanium for Use in the 10 µm Spectral Region, Optical Engineering, Vol. 30, No. 7, July, 1991, pp. 1005-1010.         [ Links ]