<?xml version="1.0" encoding="ISO-8859-1"?><article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<front>
<journal-meta>
<journal-id>2007-6835</journal-id>
<journal-title><![CDATA[Revista ALCONPAT]]></journal-title>
<abbrev-journal-title><![CDATA[Rev. ALCONPAT]]></abbrev-journal-title>
<issn>2007-6835</issn>
<publisher>
<publisher-name><![CDATA[Asociación Latinoamericana de Control de Calidad, Patología y Recuperación de la Construcción A.C.]]></publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id>S2007-68352016000300248</article-id>
<article-id pub-id-type="doi">10.21041/ra.v6i3.151</article-id>
<title-group>
<article-title xml:lang="en"><![CDATA[Effect of buttering in mechanical properties of dissimilar metal weld joints for reinforcement bars in concrete structures]]></article-title>
<article-title xml:lang="es"><![CDATA[Efecto del mantequillado en las propiedades mecánicas de uniones soldadas disímiles en barras de refuerzo para estructuras de concreto]]></article-title>
<article-title xml:lang="pt"><![CDATA[Efeito da introdução de um terceiro material sobre as propriedades mecânicas das juntas soldadas entre aço carbono e aço inox, em barras de aço para estruturas de concreto]]></article-title>
</title-group>
<contrib-group>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Ramírez-Soto]]></surname>
<given-names><![CDATA[J. C. I.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Salgado-López]]></surname>
<given-names><![CDATA[J. M.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Pérez-Quiroz]]></surname>
<given-names><![CDATA[J. T.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Pérez-López]]></surname>
<given-names><![CDATA[T.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Terán-Guillén]]></surname>
<given-names><![CDATA[J.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname><![CDATA[Martínez-Madrid]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<xref ref-type="aff" rid="Aff"/>
</contrib>
</contrib-group>
<aff id="Af1">
<institution><![CDATA[,Instituto Tecnológico de Querétaro  ]]></institution>
<addr-line><![CDATA[ Querétaro]]></addr-line>
<country>Mexico</country>
</aff>
<aff id="Af2">
<institution><![CDATA[,Centro de Ingeniería y Desarrollo Industrial  ]]></institution>
<addr-line><![CDATA[San Pablo Querétaro]]></addr-line>
<country>Mexico</country>
</aff>
<aff id="Af3">
<institution><![CDATA[,Instituto Mexicano del transporte  ]]></institution>
<addr-line><![CDATA[San Fandila Querétaro]]></addr-line>
<country>Mexico</country>
</aff>
<aff id="Af4">
<institution><![CDATA[,Centro de Investigaciones en corrosión  ]]></institution>
<addr-line><![CDATA[ Campeche]]></addr-line>
<country>Mexico</country>
</aff>
<pub-date pub-type="pub">
<day>00</day>
<month>12</month>
<year>2016</year>
</pub-date>
<pub-date pub-type="epub">
<day>00</day>
<month>12</month>
<year>2016</year>
</pub-date>
<volume>6</volume>
<numero>3</numero>
<fpage>248</fpage>
<lpage>260</lpage>
<copyright-statement/>
<copyright-year/>
<self-uri xlink:href="http://www.scielo.org.mx/scielo.php?script=sci_arttext&amp;pid=S2007-68352016000300248&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://www.scielo.org.mx/scielo.php?script=sci_abstract&amp;pid=S2007-68352016000300248&amp;lng=en&amp;nrm=iso"></self-uri><self-uri xlink:href="http://www.scielo.org.mx/scielo.php?script=sci_pdf&amp;pid=S2007-68352016000300248&amp;lng=en&amp;nrm=iso"></self-uri><abstract abstract-type="short" xml:lang="en"><p><![CDATA[ABSTRACT In this work, the influence of Inconel 182 as buttering material in the mechanical properties of dissimilar metal welds between plain carbon steel and stainless steel bars welded using SMAW has been investigated by using microstructural analysis, Vickers microhardness testing, and tensile tests. Welding with SMAW process is commonly applied in field welding of concrete structures. Therefore, this process was selected for this work. The results indicated that even if the joints contain defects generated by the welder, the mechanical properties of dissimilar welded joint without buttering are higher than the properties of joints with buttering. This methodology is proposed for the rehabilitation of concrete structures with steel bars as reinforcement, which are located in maritime enviroments.]]></p></abstract>
<abstract abstract-type="short" xml:lang="es"><p><![CDATA[RESUMEN En este trabajo se ha investigado la influencia de utilizar Inconel 182 como material de &#8220;mantequillado&#8221; en las propiedades mecánicas de uniones disimiles acero al carbono-inoxidable manufacturadas por soldadura con electrodo recubierto. Para ello se han empleados las técnicas de análisis microestructural, ensayos de microdureza Vickers, y ensayo de tensión. Se ha empleado el proceso de soldadura con electrodo recubierto por que es el más común en la soldadura de campo para la construcción. Los resultados demuestran que aun cuando las uniones disimiles sin &#8220;mantequillado&#8221; presentan defectos, sus propiedades mecánicas son superiores a las de las uniones soldadas con &#8220;mantequillado&#8221;. Esta metodología es propuesta para la rehabilitación de estructuras de concreto para ambiente maritimo con barras de acero como refuerzo.]]></p></abstract>
<abstract abstract-type="short" xml:lang="pt"><p><![CDATA[RESUMO Este artigo investiga a influência da utilização de Inconel 182 como um terceiro material, nas propriedades mecânicas de diferentes aços inoxidáveis soldados a aços carbono com uso de eletrodo revestido. Para tanto foram usados os seguintes métodos: análise microestrutural, ensaios de microdureza Vickers e ensaios mecânicos de tensão. Tem sido empregado o processo de solda com eletrodo revestido, porque é o mais comum no campo de solda para a construção. Os resultados mostram que quando as uniões são realizadas sem esse terceiro material, as propriedades mecânicas são superiores às das juntas soldadas com auxílio do Inconel 182. Esta metodologia, ora criticada, tem sido proposta para a reabilitação de estruturas de concreto em ambiente marinho, com uso de barras de aço inox como reforços.]]></p></abstract>
<kwd-group>
<kwd lng="en"><![CDATA[buttering, dissimilar metal weld joints]]></kwd>
<kwd lng="en"><![CDATA[mechanical properties]]></kwd>
<kwd lng="en"><![CDATA[microstructure]]></kwd>
<kwd lng="en"><![CDATA[defects]]></kwd>
<kwd lng="es"><![CDATA[mantequillado]]></kwd>
<kwd lng="es"><![CDATA[uniones soldadas con materiales disimiles]]></kwd>
<kwd lng="es"><![CDATA[propiedades mecánicas]]></kwd>
<kwd lng="es"><![CDATA[microestructura]]></kwd>
<kwd lng="es"><![CDATA[defectos]]></kwd>
<kwd lng="pt"><![CDATA[juntas soldadas com materiais diferentes]]></kwd>
<kwd lng="pt"><![CDATA[propriedades mecânicas]]></kwd>
<kwd lng="pt"><![CDATA[microestrutura]]></kwd>
<kwd lng="pt"><![CDATA[defeitos]]></kwd>
</kwd-group>
</article-meta>
</front><back>
<ref-list>
<ref id="B1">
<nlm-citation citation-type="">
<source><![CDATA[Standard specification for deformed and plain carbon-steel bars for concrete reinforcement]]></source>
<year>2016</year>
</nlm-citation>
</ref>
<ref id="B2">
<nlm-citation citation-type="">
<source><![CDATA[Specification for deformed and plain low-alloy steel bars for concrete reinforcement]]></source>
<year>2016</year>
</nlm-citation>
</ref>
<ref id="B3">
<nlm-citation citation-type="">
<source><![CDATA[Standard test method for microindentation hardness of materials]]></source>
<year>2016</year>
</nlm-citation>
</ref>
<ref id="B4">
<nlm-citation citation-type="">
<source><![CDATA[Standard test methods for tension testing of metallic materials]]></source>
<year>2015</year>
</nlm-citation>
</ref>
<ref id="B5">
<nlm-citation citation-type="">
<source><![CDATA[Standard guide for preparation of metallographic specimens]]></source>
<year>2011</year>
</nlm-citation>
</ref>
<ref id="B6">
<nlm-citation citation-type="">
<source><![CDATA[Standard practice for macroetching metals and alloys]]></source>
<year>2015</year>
</nlm-citation>
</ref>
<ref id="B7">
<nlm-citation citation-type="book">
<source><![CDATA[D1. 4/D1. 4M- &#8220;Structural welding code-reinforcing&#8221;]]></source>
<year>2005</year>
<publisher-name><![CDATA[Steel American Welding Society]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B8">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Balakrishnan]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<name>
<surname><![CDATA[Balasubramanian]]></surname>
<given-names><![CDATA[V.]]></given-names>
</name>
<name>
<surname><![CDATA[Reddy]]></surname>
<given-names><![CDATA[G. M.]]></given-names>
</name>
<name>
<surname><![CDATA[Sivakumar]]></surname>
<given-names><![CDATA[K.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Effect of buttering and hardfacing on ballistic performance of shielded metal arc welded armour steel joints]]></article-title>
<source><![CDATA[Materials &amp; Design]]></source>
<year>2011</year>
<volume>32</volume>
<numero>2</numero>
<issue>2</issue>
<page-range>469-79</page-range></nlm-citation>
</ref>
<ref id="B9">
<nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Cunat]]></surname>
<given-names><![CDATA[J. P.]]></given-names>
</name>
</person-group>
<source><![CDATA[Alloying elements in stainless steel and other chromium-containing alloys]]></source>
<year>2004</year>
<publisher-name><![CDATA[Euroinox]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B10">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Doddy]]></surname>
<given-names><![CDATA[T.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Intermediate mixed zones in dissimilar metal welds for sour service]]></article-title>
<source><![CDATA[Welding Journal]]></source>
<year>1992</year>
<volume>71</volume>
<page-range>55-60</page-range></nlm-citation>
</ref>
<ref id="B11">
<nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Evans]]></surname>
<given-names><![CDATA[R. M.]]></given-names>
</name>
</person-group>
<source><![CDATA[Joining of nickel-base alloys]]></source>
<year>1962</year>
<publisher-loc><![CDATA[Columbus 1, Ohio ]]></publisher-loc>
<publisher-name><![CDATA[battelle memorial institute]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B12">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Fuentes]]></surname>
<given-names><![CDATA[A. L. G.]]></given-names>
</name>
<name>
<surname><![CDATA[Centeno]]></surname>
<given-names><![CDATA[L.]]></given-names>
</name>
<name>
<surname><![CDATA[García]]></surname>
<given-names><![CDATA[R. D. S.]]></given-names>
</name>
<name>
<surname><![CDATA[Del Rosario]]></surname>
<given-names><![CDATA[A. V.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Metallurgy of dissimilar steels welded unions (ASTM A240-A537) and mechanical behavior under monotonic and cyclic loads]]></article-title>
<source><![CDATA[Revista Latinoamericana de Metalurgia y Materiales]]></source>
<year>2011</year>
<page-range>36-48</page-range></nlm-citation>
</ref>
<ref id="B13">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Hernández-Castañeda]]></surname>
<given-names><![CDATA[O.]]></given-names>
</name>
<name>
<surname><![CDATA[Mendoza-Escobedo]]></surname>
<given-names><![CDATA[C. J.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Durabilidad e infraestructura: retos e impacto socioeconómico]]></article-title>
<source><![CDATA[Ingeniería Investigación y Tecnología]]></source>
<year>2006</year>
<volume>VII</volume>
<numero>1</numero>
<issue>1</issue>
</nlm-citation>
</ref>
<ref id="B14">
<nlm-citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Istrati]]></surname>
<given-names><![CDATA[G.]]></given-names>
</name>
</person-group>
<source><![CDATA[Manual de los aceros inoxidables]]></source>
<year>1961</year>
<publisher-name><![CDATA[Librería Editorial Alsina]]></publisher-name>
</nlm-citation>
</ref>
<ref id="B15">
<nlm-citation citation-type="confpro">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Jang]]></surname>
<given-names><![CDATA[C.]]></given-names>
</name>
<name>
<surname><![CDATA[Lee]]></surname>
<given-names><![CDATA[J. H.]]></given-names>
</name>
<name>
<surname><![CDATA[Jung]]></surname>
<given-names><![CDATA[S. Y.]]></given-names>
</name>
<name>
<surname><![CDATA[Kim]]></surname>
<given-names><![CDATA[J. S.]]></given-names>
</name>
<name>
<surname><![CDATA[Jin]]></surname>
<given-names><![CDATA[T. E.]]></given-names>
</name>
</person-group>
<source><![CDATA[Tensile property evaluation of dissimilar metal welds containing alloy 82/182 fusion weld using miniature specimen]]></source>
<year>2006</year>
<volume>1</volume>
<conf-name><![CDATA[ KNS Spring Meeting]]></conf-name>
<conf-loc>Chunchon, Korea </conf-loc>
<page-range>1-23</page-range></nlm-citation>
</ref>
<ref id="B16">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Jang]]></surname>
<given-names><![CDATA[C.]]></given-names>
</name>
<name>
<surname><![CDATA[Lee]]></surname>
<given-names><![CDATA[J.]]></given-names>
</name>
<name>
<surname><![CDATA[Kim]]></surname>
<given-names><![CDATA[J. S.]]></given-names>
</name>
<name>
<surname><![CDATA[Jin]]></surname>
<given-names><![CDATA[T. E.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Mechanical property variation within Inconel 82/182 dissimilar metal weld between low alloy steel and 316 stainless steel]]></article-title>
<source><![CDATA[International Journal of Pressure Vessels and Piping]]></source>
<year>2008</year>
<volume>85</volume>
<numero>9</numero>
<issue>9</issue>
<page-range>635-46</page-range></nlm-citation>
</ref>
<ref id="B17">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Klueh]]></surname>
<given-names><![CDATA[R. L.]]></given-names>
</name>
<name>
<surname><![CDATA[King]]></surname>
<given-names><![CDATA[J. F.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Austenitic stainless steel-ferritic steel weld joint failures]]></article-title>
<source><![CDATA[WELDING J.]]></source>
<year>1982</year>
<volume>61</volume>
<numero>9</numero>
<issue>9</issue>
</nlm-citation>
</ref>
<ref id="B18">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Lundin]]></surname>
<given-names><![CDATA[C. D.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Dissimilar metal welds-transition joints literature review]]></article-title>
<source><![CDATA[Welding Journal]]></source>
<year>1982</year>
<volume>61</volume>
<numero>2</numero>
<issue>2</issue>
<page-range>58-63</page-range></nlm-citation>
</ref>
<ref id="B19">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Murugan]]></surname>
<given-names><![CDATA[N.]]></given-names>
</name>
<name>
<surname><![CDATA[Parmar]]></surname>
<given-names><![CDATA[R. S.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Stainless steel cladding deposited by automatic gas metal arc welding]]></article-title>
<source><![CDATA[Welding Journal]]></source>
<year>1997</year>
<volume>76</volume>
<numero>10^sIncluding Welding Research Supplement</numero>
<issue>10^sIncluding Welding Research Supplement</issue>
<supplement>Including Welding Research Supplement</supplement>
<page-range>391-401</page-range></nlm-citation>
</ref>
<ref id="B20">
<nlm-citation citation-type="">
<source><![CDATA[NMX-H-121-1988 &#8220;Procedimiento de soldadura estructural acero de refuerzo&#8221;]]></source>
<year></year>
</nlm-citation>
</ref>
<ref id="B21">
<nlm-citation citation-type="confpro">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Olden]]></surname>
<given-names><![CDATA[V.]]></given-names>
</name>
<name>
<surname><![CDATA[Kvaale]]></surname>
<given-names><![CDATA[P. E.]]></given-names>
</name>
<name>
<surname><![CDATA[Simensen]]></surname>
<given-names><![CDATA[P. A.]]></given-names>
</name>
<name>
<surname><![CDATA[Aaldstedt]]></surname>
<given-names><![CDATA[S.]]></given-names>
</name>
<name>
<surname><![CDATA[Solberg]]></surname>
<given-names><![CDATA[J. K.]]></given-names>
</name>
</person-group>
<source><![CDATA[The effect of PWHT on the material properties and micro structure in inconel 625 and inconel 725 buttered joints]]></source>
<year>2003</year>
<conf-name><![CDATA[ ASME 2003 22nd International Conference on Offshore Mechanics and Arctic Engineering, American Society of Mechanical Engineers]]></conf-name>
<conf-date>January</conf-date>
<conf-loc> </conf-loc>
<page-range>109-15</page-range></nlm-citation>
</ref>
<ref id="B22">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Ospina]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
<name>
<surname><![CDATA[Aguirre]]></surname>
<given-names><![CDATA[H.]]></given-names>
</name>
<name>
<surname><![CDATA[Parra]]></surname>
<given-names><![CDATA[H.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Soldabilidad en aceros inoxidables y aceros disimiles]]></article-title>
<source><![CDATA[Scientia et Technica]]></source>
<year>2007</year>
<page-range>13-34</page-range></nlm-citation>
</ref>
<ref id="B23">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Pérez-Quiroz]]></surname>
<given-names><![CDATA[J. T.]]></given-names>
</name>
<name>
<surname><![CDATA[Terán]]></surname>
<given-names><![CDATA[J.]]></given-names>
</name>
<name>
<surname><![CDATA[Herrera]]></surname>
<given-names><![CDATA[M. J.]]></given-names>
</name>
<name>
<surname><![CDATA[Martínez]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
<name>
<surname><![CDATA[Genescá]]></surname>
<given-names><![CDATA[J.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Assessment of stainless steel reinforcement for concrete structures rehabilitation]]></article-title>
<source><![CDATA[Journal of Constructional Steel Research]]></source>
<year>2008</year>
<volume>64</volume>
<numero>11</numero>
<issue>11</issue>
<page-range>1317-24</page-range></nlm-citation>
</ref>
<ref id="B24">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Shinozaki]]></surname>
<given-names><![CDATA[K.]]></given-names>
</name>
<name>
<surname><![CDATA[Ke]]></surname>
<given-names><![CDATA[L.]]></given-names>
</name>
<name>
<surname><![CDATA[North]]></surname>
<given-names><![CDATA[T. H.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Hydrogen cracking in duplex stainless steel weld metal]]></article-title>
<source><![CDATA[WELDING JOURNAL]]></source>
<year>1992</year>
<page-range>371-87</page-range><publisher-loc><![CDATA[NEW YORK ]]></publisher-loc>
</nlm-citation>
</ref>
<ref id="B25">
<nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Tabatabai]]></surname>
<given-names><![CDATA[H.]]></given-names>
</name>
<name>
<surname><![CDATA[Ghorbanpoor]]></surname>
<given-names><![CDATA[A.]]></given-names>
</name>
<name>
<surname><![CDATA[Pritzl]]></surname>
<given-names><![CDATA[M. D.]]></given-names>
</name>
</person-group>
<source><![CDATA[Evaluation of select methods of corrosion prevention, corrosion control, and repair in reinforced concrete bridges]]></source>
<year>2009</year>
</nlm-citation>
</ref>
<ref id="B26">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Tu&#353;ek]]></surname>
<given-names><![CDATA[J.]]></given-names>
</name>
<name>
<surname><![CDATA[Bajcer]]></surname>
<given-names><![CDATA[B.]]></given-names>
</name>
<name>
<surname><![CDATA[Taljat]]></surname>
<given-names><![CDATA[B.]]></given-names>
</name>
<name>
<surname><![CDATA[Hr&#382;enjak]]></surname>
<given-names><![CDATA[M.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Analysis of lack of fusion in welds at water heaters]]></article-title>
<source><![CDATA[Metalurgija]]></source>
<year>2007</year>
<volume>46</volume>
<numero>2</numero>
<issue>2</issue>
<page-range>111-6</page-range></nlm-citation>
</ref>
<ref id="B27">
<nlm-citation citation-type="">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Washko]]></surname>
<given-names><![CDATA[S. D.]]></given-names>
</name>
<name>
<surname><![CDATA[Aggen]]></surname>
<given-names><![CDATA[G.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Properties and selection: irons, steels, and high performance alloys]]></article-title>
<source><![CDATA[ASM Handbook]]></source>
<year>2005</year>
<volume>1</volume>
<edition>10</edition>
<page-range>2145-248</page-range></nlm-citation>
</ref>
<ref id="B28">
<nlm-citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname><![CDATA[Winarto]]></surname>
<given-names><![CDATA[G. D.]]></given-names>
</name>
<name>
<surname><![CDATA[Wardhani]]></surname>
<given-names><![CDATA[R.]]></given-names>
</name>
<name>
<surname><![CDATA[Syarif]]></surname>
<given-names><![CDATA[I.]]></given-names>
</name>
</person-group>
<article-title xml:lang=""><![CDATA[Analysis of buttering method on mechanical properties welded material low carbon steel]]></article-title>
<source><![CDATA[IPTEK Journal of Proceedings Series]]></source>
<year>2014</year>
<volume>1</volume>
<numero>1</numero>
<issue>1</issue>
<page-range>109-13</page-range></nlm-citation>
</ref>
</ref-list>
</back>
</article>
