A computer model for a high temperature fuel cell
E. Hernández-Pacheco y M.D. Mann
Systems Research Center-Mexico, Intel, Tlaquepaque, Jalisco, Tel. Office:+52 3335406024, Fax:+52 3335406099, e-mail: eduardo.hernandez.pacheco@intel.com
Department of Chemical Engineering, University of North Dakota, Grand Forks-ND, e-mail: mikemann@mail.und.nodak.edu
]]> Recibido el 30 de marzo de 2005;
Abstract
A computer model is developed for determining the performance characteristics (e.g., current-voltage curves) of a solid oxide fuel cell. The model determines the fuel/oxidant concentration, the temperature profiles and the current density along the fuel and oxidant channels, respectively. Then, the average of the local current density distribution is used to determine the current-voltage curves (IV curves) over the entire range of cell potential, i.e., from open circuit voltage to short circuit voltage.
Keywords: Fuel cells; electrochemistry; computer modeling.
Resumen
Se desarrolla un modelo por computadora para determinar las características de desempeño (e.g., curvas de corriente y voltaje) de una celda de combustible de óxido sólido. El modelo determina la concentración de combustible/oxidante, el perfil de temperaturas y la densidad local de corriente a lo largo de los canales de combustible y oxidante, respectivamente. Posteriormente, el promedio de la distribución de la densidad de corriente se usa para crear las curvas de corriente-voltaje en el intervalo completo del potencial de la celda, i.e., desde el voltaje de circuito abierto hasta el voltaje de corto circuito.
Descriptores: Celdas de combustible; electroquímica; modelo computacional.
]]>PACS: 82.47.Ed; 82.47.-a; 07.05.Tp
DESCARGAR ARTÍCULO EN FORMATO PDF
Acknowledgments
This material is based upon work supported by the National Science Foundation under grant No. 0093923. We also gratefully acknowledge the Mexican Federal Goverment, through the Secretary of Economy and CONACyT, and the State of Jalisco for their partial support ofthis project.
References
1. E. Services, Fuel Cell Hndbook, 6th ed. (Parsons, inc., Science Applicatrions International Corporation, 2002). [ Links ]
2. T.V. Nguyen and R.E. White, Journal of the Electronchemical Society 140 (1993)2178. [ Links ]
3. N.Q. Minh and T. Takahashi, Science and Technology of Ceramic Fuel Cells (Elsevier, 1995). [ Links ]
4. E. Hernandez-Pacheco, M.D. Mann, P. N. Hutton, D. Singh, and K.E. Martin, International Journal of Hydrogen Energy 30 (2005) 1221. [ Links ]
5. E. Hernandez-Pacheco, D. Sing, P.N. Hutton, N. Patel, and M.D. Mann, Journal of Power Cources 138 (2004) 174. [ Links ]
6. P. Costamagna, A. Selimovic, M.D. Borghi, and G. Agnew, Chemical Engineering Journal 102 (2004) 61. [ Links ]
7. R. Suwanwarangkul et al., Journal Of Power Sources 122 (2003) 9. [ Links ]
8. H. Zhu and R.J. Kee, Journal of Power Sources 117 (2003) 61. [ Links ]
9. P. Costamagna, P. Costa, and V. Antonucci, Electrochemica Acta 43 (1998) 375. [ Links ]
10. S.H. chan and Z.T. Xia, Journal of the Electrochemical Society 148 (2001) A388. [ Links ]
11. E. Achenbach, in Modelling and Evaluation of advanced Solid Oxice Fuel Cells (International Energy Agency Programme on R, D & D on Advanced fuel Cells, 1996). [ Links ]
12. M. Iwata et al., Solid State Ionics 132 (2000) 297. [ Links ]
13. E. Hernandez-Pacheco and M.D. Mann, Journal of Power Sources 128 (2004)25. [ Links ]
14. J.R. Ferguson, in International Sumposium on Solid Oxide Fuel Cells (Comission of the European Communities, 1991) p. 305. [ Links ]
15. F.P. Incropera and D.P. DeWitt, Fundamentals of Heat and Mass Transfer, 5th ed. (John Wiley and Sons, LTD, 2002). [ Links ]
16. R.C. Reid, J.M. Prausnitz, and B.E. Poling, The Properties of Gases and Liquids, 4th ed. (McGraw Hill Book company, 1987). [ Links ]
17. P. Batfalsky, U. Diekmann, J.G. Maliszewski, and T.K. Julich, in International Conference of Joining Ceramics, Grass and Metal, edited by DVS-Berichte (1997), p. 72. [ Links ]
]]>