J. A. Jiménez-García*¹, S. Téllez-Vázquez², J. M. Medina-Flores³, H. H. Rodríguez-Santoyo⁴ and J. Cuevas-Ortuño⁵

¹ Departamento de Ingeniería Industrial Tecnológico Nacional de México Instituto Tecnológico de Celaya. * alfredo.jimenez@itcelaya.edu.mx

² Administración y Gestión de Pequeñas y Medianas Empresas Universidad Politécnica de Guanajuato.

³ Ingeniería en Energía Universidad Politécnica de Guanajuato Cortazar Guanajuato, México.

⁴ Ingeniería en Energía Universidad Politécnica de Guanajuato Cortazar Guanajuato, México.

⁵ Departamento de Ingeniería Industrial y de Sistemas Tecnológico de Monterrey, campus Guadalajara Guadalajara, Jalisco, México.

Identifying the most efficient supply system for a company working under Lean Manufacturing practices was possible with the support of this work. Promodel software was used to develop simulation model depicting a constant velocity joints (CVJ) production system, where two different supply methods were assessed. According to results herein obtained, better performance is achieved under random supply method in comparison with a clustering supply method. The company's goal is to keep 1% losses due to lack of material. In the actual process, this essential parameter was reduced from 2.73% to 1.177%, if random supply method is properly implemented.

Keywords: Supply system, lean manufacturing, simulation.

DESCARGAR ARTÍCULO EN FORMATO PDF

Acknowledgments

This project was performed thanks to support given by Conacyt through scholarship No. 228973 for funding my specialization studies and we wish to thank CIATEC, where training about industrial engineering topics were given by expert personal.

References

[1] M. H. Hugos. "Essentials of Supply Chain management", third edition. United States of America. John Willey, 2011. pp. 21-26.         [ Links ]

[2] D. Rajenthirakumar, and R. Ghowtam Shankar, "Analyzing of the benefits: a consumer durables manufacturing company case study," International Journal of engineering. Annals of Faculty Engineering Hunedoara. London, Tome IX, Fascicule 3. pp. 335-339, 2011.         [ Links ]

[3] J. A. Jiménez et al. "Diagnostico en el surtimiento de materiales en líneas de ensamble de flechas de velocidad constante Utilizando Promodel," En: Actas del 1er Congreso Internacional de investigación e innovación 2012. Multidisciplinario, (26 y 27 de abril de 2012). ISBN: 978-607-95635.         [ Links ]

[4] C. R. Standridge and J. H. Marvel. "Why lean needs simulation". Proceedings of the 2006 Winter Simulation Conference. p. 1907-1913. ISBN: 1-4244-0501-7.         [ Links ]

[5] M. Cedillo and C. Sanchez. "Dynamic Self-Assessment of Supply Chains Performance: an Emerging Market Approach", Journal of Applied Research and Technology. Vol. 11, June 2013, pp. 338-347.         [ Links ]

[6] A. K. Jain et al. "Data clustering: a review", ACM Computing Surveys. Septiembre 1999. Vol. 31, No.3. p.264-323. DOI:10.1145/331499.331504.         [ Links ]

[7] R. G. González et al. "A Hybrid Metaheuristic Approach to Optimize the Districting Design of a Parcel Company", Journal of Applied Research and Technology. Vol. 9 April 2011, pp. 19-35.         [ Links ]

[8] J. W. Ohlmann, et al. "Route Design for Lean Production Systems". Transportation Science. Agosto 2008. Vol. 42. No.3. p. 352-370. DOI:10.1287/trsc.1070.0222.         [ Links ]

[9] C Harrell, B. K. Gosh y R Bowden. "Simulatión Using Promodel", 3a ed. United States of America: Mc Graw Hill Higher Education, 2000. pp. 194-217.         [ Links ]

[10] J. A. Jiménez et al. "Propuesta de mejora basada en manufactura esbelta para el surtimiento de materiales en un célula de ensamble utilizando la simulación" Academia Journals. Noviembre 2012. Vol. 4 No. 3 Tomo 11, pp. 1447-1452. ISSN 1946-5351.         [ Links ]

[11] R. G. Sargent. "Verification and validation of simulation models". Proceedings of the 30th conference on Winter simulation. Department of Electrical Engineering and Computer Science. 1998. p.121-130. ISBN: 0-7803-5134-7.         [ Links ]

[12] D. C. Montgomery and G. C. Runger. "Applied statistics and probability for engineers", Third edition. Arizona: John Willey, 2003. pp. 250-290.         [ Links ]

[13] E. J. Chen and W. D. Kelton. "Determining simulation run length with the runs test". Simulation Modelling Practice and Theory. Volume 11. July 2003. pp. 237-250.         [ Links ]