E. E. Antúnez-Cerón¹, M. A. Basurto-Pensado*¹, A.R. Mejía-Aranda¹,R.J. Romero¹, J. J. Sánchez-Mondragón², H. H. Cerecedo-Núñez³, A. Ochoa-Zezzati⁴

¹ Centro de Investigación en Ingeniería y Ciencias Aplicadas Universidad Autónoma del Estado de Morelos Cuernavaca, Mor., México. *mbasurto@uaem.mx

² Instituto Nacional de Astrofísica, Óptica y Electrónica Instituto de Investigaciones Eléctricas Tonantzintla, Pue., México.

³ Universidad Veracruzana Xalapa, Veracruz, México.

⁴ Universidad Autónoma de Ciudad Juárez Cd. Juárez, Tamaulipas, México.

We use multimode interference (MMI) as an alternative optical technique to estimate lithium bromide (LiBr) concentration, of the work pair LiBr-H2O, in absorption heat pumps (AHP). The sensing element is a singlemode-multimode-singlemode (SMS) fiber optic structure. This is fabricated by splicing a precisely dimensioned multimode fiber (MMF) section between two singlemode fibers (SMFs). The operation principle is based on the multimode interference (MMI) effect occurring in the MMF section. For that purpose, different concentrations of the mixture were prepared (from 44.30% to 60.69%) to study their optical response. The input field profile entering the sensing element, which is the naked (no cladding) MMF section of the SMS fiber structure, produced different transmitted intensity responses for each of these concentrations. Thus the optical characterization of the mixture was used to establish a mathematical relation to estimate the LiBr concentration. A linear fit for solutions with concentrations ranging from 43.30% to 50.87% and refractive indices between 1.421 and 1.439 is demonstrated.

Keywords: multimode interference, fiber optic, refractive index.

DESCARGAR ARTÍCULO EN FORMATO PDF

Acknowledgements

This work was supported by the "Consejo Nacional de Ciencia y Tecnología" of Mexico (Projects CONACyT CB:169197 and CB:101378).

References

[1] R.J. Romero et al., "Solar Energy Upgrading by thermodynamic cycles with steam absorption in aqueous solution," in Solar Energy: Research Technology and Applications, Nova Science Publishers, 2008, pp. 277-316.         [ Links ]

[2] D.A. Skoog et al., Introducción a los métodos espectroquímicos en "Fundamentos de Química Analítica", Thompson, 2006, pp. 717-752.         [ Links ]

[3] D.A. Skoog et al., Introducción a la espectrometría de absorción molecular UV-VIS en "Principios de Análisis Instrumental", CENGAGE Learning, 2008, pp. 332-351.         [ Links ]

[4] Q. Wang and G. Farrell, "All-fibre multimode-interference-based refractometer sensor: proposal and design," Opt. Lett., vol. 31, pp. 317-319, 2006.         [ Links ]

[5] E. Li y G.D. Peng, "Wavelength-encoded fibre-optic temperature sensor with ultra-high sensitivity," Opt. Commun., vol. 281, pp. 5768-5770, 2008.         [ Links ]

[6] W.S. Mohammed, P.W.E. Smith, y X. Gu, "All-fibre multimode interference bandpass filter," Opt. Lett., vol. 31, pp. 2547-2549, 2006.         [ Links ]

[7] S.M. Tripathi et al., "Strain and temperature sensing characteristics of single-mode-multimode-single-mode structures," J. Lightw. Technol., vol. 27, pp. 2348-2356, 2009.         [ Links ]

[8] E. Castillo-Castañeda, "On-line wear detection of milling tools using a displacement fiber optic sensor", Journal of Applied Research and Technology, vol. 1, no. 2, pp. 164-174, 2012.         [ Links ]

[9] E.F. Pinzón-Escobar and G.E. Sandoval-Romero, "Experimental Results of the Superluminescent Fiber Laser Sources for Fiber Optic Sensors", Journal of Applied Research and Technology, vol. 1, pp. 20-27, 2012.         [ Links ]

[10] L.B. Soldano and E.C.M. Pennings, "Optical multimode interference devices based on self-imaging: principles and applications", J. Ligthw. Technol., vol.13, pp. 615-627, 1995.         [ Links ]