J. Acosta-Cano*¹, F. Sastrón-Báguena²

¹ División de Estudios de Posgrado Instituto Tecnológico de Chihuahua Chihuahua, México. *jacosta@itchihuahua.edu.mx.

² División de Ingeniería de Sistemas y Automática (DISAM) Escuela Técnica Superior de Ingenieros Industriales Universidad Politécnica de Madrid Madrid, España.

ABSTRACT

Coupling shop floor software system (SFS) with the set of production equipment (SPE) becomes a complex task. It involves open and proprietary standards, information and communication technologies among other tools and techniques. Due to market turbulence, either custom solutions or standards based solutions eventually require a considerable effort of adaptation. Loose coupling concept has been identified in the organizational design community as a compensator for organization survival. Its presence reduces organization reaction to environment changes. In this paper the results obtained by the organizational design community are identified, translated and organized to support the SFS-SPE integration problem solution. A classical loose coupling model developed by organizational studies community is abstracted and translated to the area of interest. Key aspects are identified to be used as promoters of SFS-SPE loose coupling and presented in a form of a reference scheme. Furthermore, this reference scheme is proposed here as a basis for the design and implementation of a generic coupling solution or coupling framework, that is included as a loose coupling stage between SFS and SPE. A validation example with various sets of manufacturing equipment, using different physical communication media, controller commands, programming languages and wire protocols is presented, showing an acceptable level of autonomy gained by the SFS.

RESUMEN

Acoplamiento del sistema informático de control de piso de producción (SFS) con el conjunto de equipos de fabricación (SPE) es una tarea compleja. Tal acoplamiento involucra estándares abiertos y propietarios, tecnologías de información y comunicación, entre otras herramientas y técnicas. Debido a la turbulencia de mercados, ya sea soluciones personalizadas o soluciones basadas en estándares eventualmente requieren un esfuerzo considerable de adaptación. El concepto de acoplamiento débil ha sido identificado en la comunidad de diseño organizacional como soporte para la sobrevivencia de la organización. Su presencia reduce la resistencia de la organización a cambios en el ambiente. En este artículo los resultados obtenidos por la comunidad de diseño organizacional son identificados, traducidos y organizados para apoyar en la solución del problema de integración SFS-SPE. Un modelo clásico de acoplamiento débil, desarrollado por la comunidad de estudios de diseño organizacional, es resumido y trasladado al área de interés. Los aspectos claves son identificados para utilizarse como promotores del acoplamiento débil entre SFS-SPE, y presentados en forma de esquema de referencia. Así mismo, este esquema de referencia es presentado como base para el diseño e implementación de una solución genérica de acoplamiento o marco de trabajo (framework) de acoplamiento, a incluir como etapa de acoplamiento débil entre SFS y SPE. Un ejemplo de validación con varios conjuntos de equipos de fabricación, usando diferentes medios físicos de comunicación, comandos de controlador, lenguajes de programación de equipos y protocolos de comunicación es presentado, mostrando un nivel aceptable de autonomía del SFS.

DESCARGAR ARTÍCULO EN FORMATO PDF

References

[1] M. Mehrabi, et al., Reconfigurable Manufacturing Systems: Key to future manufacturing, J. Intell. Manuf. n° 11, pp. 403-419, 2000.         [ Links ]

[2] R. M. Setchi and N. Lagos, Reconfigurability and Reconfigurable Manufacturing Systems State-of-the-art Review, in 2004 IEEE International Conference on Industrial Informatics (INDIN´04), Berlin, June, 2004, pp. 529-535.         [ Links ]

[3] L. Aiping and L. Chao, Reconfigurable Manufacturing System Modelling Method based on object-oriented technology, in 2009 IEEE International Conference on Mechatronics and Automation, Ghangchun, 2009, pp.3420-3425.         [ Links ]

[4] R. Zurawsky, Scanning the Issue. Special Issue on Industrial Communication Systems, Proc. of the IEEE, June 2005, pp. 1067-1072.         [ Links ]

[5] S. X. Ye and R. G. Qiu, An Architecture of Configurable Equipment Connectivity in a Future Manufacturing Information System, in IEEE International Simposium on Computational Intelligence in Robotics and Automation, Kobe, Japan, 2003, pp. 1144-1149.         [ Links ]

[6] J. R. Martinez Lastra and I. M. Delamer, Semantic Web Services in Factory Automation: Fundamental Insights and Research Roadmap, IEEE Trans Ind. Inf., vol. 2, nº 1, pp. 1-11, February 2006.         [ Links ]

[7] National Instrument, NI-VISA User Manual. Part Number 370423A-01, National Instrument, 1997.         [ Links ]

[8] A. J. R. Aendenroomer et al., "Message Discovery in SEMI Communication for Rapid Equipment Integration", in IEEE International Conference on Industrial Informatics, Singapore, 2006, pp. 525-530.         [ Links ]

[9] G. D. P. Z. Putnik, "A semiotic framework for manufacturing system integration - Part 1: Generative Integration Model", Int. J. Computer Integr. Manuf. Vol. 23, N. 8-9, pp. 691-709, 2010.         [ Links ]

[10] J. Lapha, "RobotScript™: the introduction of a universal robot programming language", Ind. Robot: Int. J., Vol. 16, Num. 1, pp. 17-25, 1999.         [ Links ]

[11] G. B. M. Biggs, "A Survey of Robot Programming Systems", in Proceedings of the Australaian Conference on Robotics and Automation, Brisbane, Australia, 2003, pp. 1-10.         [ Links ]

[12] C. Duncheon., "Universal robot language - does it support agile automation?", Ind. Robot: An Int. J., pp. -, Issue 1, 1999.         [ Links ]

[13] Z. Pan, et al. "Recent progress on programming methods for industrial robots", in Robotics (ISR), 2010 41st International Symposium on and 2010 6th German Conference on Robotics (ROBOTIK), 2010, pp. 1-8.         [ Links ]

[14] M. Lichtveld and B. Van der Zon, "A New Architecture for Equipment and Clusters for Backend Processes", in SEMI Technology Symposium: International Electronics Manufacturing Technology (IEMT) Symposium, 2002, pp. 398-402.         [ Links ]

[15] A. Lobov et al. "Service Oriented Architecture in Developing of Loosely-coupled Manufacturing Systems", in IEEE International Conference on Industrial Informatics (INDIN 2008), Daejeon, Korea, 2008, pp. 791-796.         [ Links ]

[16] A. Ferrolho and M. Crisóstomo, "Intelligent Control and Integration Software for Flexible Manufacturing Cells", IEEE Trans. Ind. Inf. Vol. 3, Num.1, pp. 3-11, 2007.         [ Links ]

[17] OMG, CORBA Based Machine Control, Object Management Group, 1998.         [ Links ]

[18] G. Chryssolouris. "Manufacturing Systems. Theory and Practice", New York, Spring. Ver., 2a. ed., 2005.         [ Links ]

[19] M. P Groover., "Fundamentals of Modern Manufacturing, Materials, Processes and Systems", México, McGraw Hill, 2007, pp. 194-884.         [ Links ]

[20] S. Melnyk. and P. Carter, "Production Activity Control", Homewood Ill, Irwin/APICS Ser. in Prod. Mngmnt, 1987, pp. 30-32.         [ Links ]

[21] AMICE, CIMOSA: Open System Architecture for CIM, Brussels, Spring. Ver. 2nd ed., 1993.         [ Links ]

[22] F. Vernadat, "Enterprise Modelling and Integration Principles and Integration", London, Chap. & Hall, London, 1996, PP.45.         [ Links ]

[23] G. Plossl, "Orlicky`s Material Requirement Planning", New York, McGraw Hill, 1994, pp. 11.         [ Links ]

[24] T. E. Vollman. et al., "Manufacturing Planning and Control Systems", New York, McGrawHill,1997, pp. 803.         [ Links ]

[25] T. Lunn and S. A. Neff, "MRP Integrated Material Requirements Planning and Modern Business", Irwin, 1992, pp. 7.         [ Links ]

[26] F. Cheng et al., "Development of a system framework for the computer integrated manufacturing execution system: a distributed object oriented approach", Int. J. Computer Integr. Manuf., pp. 384-402, 1999.         [ Links ]

[27] S. Owen et al., "A Modular Reconfigurable Approach to the Creation of Flexible Manufacturing Cells for Educational Purposes", in Intelliigent Robots and Systems Proceedings. of the IEEE Conference on, 1997, pp.1-13.         [ Links ]

[28] F. Gonzalez and W. Davis, "A Simulation Based Controller for Distributed Discrete Event Systems with Application to Flexible Manufacturing", in Proceedings of the 1996 Winter Simulation Conference, 1996, pp. 845-852.         [ Links ]

[29] F. Chan and J. Zhang, "Object Oriented Architecture of Control System for Agile Manufacturing Cells", Proceedings of the International Conference on Management of Innovation and Technology, 2000, pp. 863-868.         [ Links ]

[30] G. Berio and F. Vernadat, "Enterprise modelling with CIMOSA: Functional and Organizational aspects, Production Planning and Control", Prod. Plann. Contr., 2001, pp. 128-136.         [ Links ]

[31] H. Engelke et al. "Integrated Manufacturing Modelling System", IBM J. Res. Dev. Journal of Research and Development, vol. 29, nº 9, pp. 343-55, 1985.         [ Links ]

[32] J.G. Nell and N.B. Christopher, "Standards Road Map Project. Standards Classification Strategy and Methodology. A task of the manufacturing-enterprise integration project", National Institute of Standards and Technology, Gaithersburg MD, 1999.         [ Links ]

[33] F. Chan and J. Zhang, "Modelling of agile manufacturing systems", Int. J. Prod. Res.,vol. 39, nº 1, pp. 2323-32, 2001.         [ Links ]

[34] H .Freund and H.-J. Buxmaum, "Universal Work Cell Controller-Application Experiences in Flexible Manufacturing", Proceedings of the IEEE Conference on Intelligent Robots and Systems, 1994, pp. 56-63.         [ Links ]

[35] J. White and E. Cone, "Using Measurement Studio GPIB to Accelerate Development with Visual Basic", National Instrument, Application Note, Austin Tx, 2001.         [ Links ]

[36] S. Adiga, "Object-Oriented Software for Manufacturing Systems", London, Chap.Hall, London, 1993, pp. 26.         [ Links ]

[37] G. Berio et al. "The M* OBJECT Methodology for Information System Design in CIM Environment", IEEE Trans. Syst. Man Cybern., vol. 25, no. 1, pp. 68-85, 1995. (MObjMethod.pdf)        [ Links ]

[38] J. Barry et al., "NIIP-SMART: An investigation of Distributed Object Approaches to Support MES Deployment in a Virtual Enterprise", Proceedings of Enterprise Distributed Object Computing Workshop EDCO'98, 1998, pp. 366-377.         [ Links ]

[39] R. Fûrich et al., "A Component Based Application Framework for Manufacturing Execution System in C# and .NET", in 40th International Conference on Technology of Object-Oriented Languages and Systems (TOOLS Pacific 2002), 2002, pp.         [ Links ] -.

[40] C. Pautass and E. Wilde, "Why is the Web Loosely Coupled? A Mult-Faceted Metric for Service Design",World Wide Web Conference-WWW2009, Madrid, 2009, pp. 911-920.         [ Links ]

[41] M. P. Papazoglou et al. "Service-Oriented Computing: State of the Art and Research Challenges", Computer, 2007, pp. 38-45.         [ Links ]

[42] Sang Chul Ahn et al. "uPnP Robot Middleware for Ubiquitous Robot Control", in The 3rd International Conference on Ubiquitous Robot Control and Ambient Intelligence (URAI 2006), 2006, pp. 53-58.         [ Links ]

[43] S. Helal, "Standards for Service Discovery and Delivery", IEEE Pervasive Comput, vol. 1, no. 3, pp. 95-100, 2002.         [ Links ]

[44] M. Kwiatkowska, "Introduction", Philos Transact A Math Phys Eng Sci, pp. 3365-3668, 2008.         [ Links ]

[45] S. Resnick et al., "Essential Windows Communication Foundation For .Net Framework 3.5", Boston, MA, Pearson Education Inc., 2008, pp. 2.         [ Links ]

[46] J. D. Orton and K. Weick, "Loosely Coupled Systems: A reconceptualization", Acad Manage Rev, pp. 203-223, 1990.         [ Links ]

[47] Real Academia de la Lengua, "Diccionario de la Real Academia Española de la Lengua", [Online], Available: http://www.rae.es. [Accessed 5th January 2012]         [ Links ].

[48] J. D. Thompson, "Organizations in Action: Social Sciences Bases of Administrative Theory", New York, McGraw Hill, 1967, pp. 4-10.         [ Links ]

[49] A. Cucinotta et al. "A Real-Time Service-Oriented Architecture for Industrial Automation", IEEE Trans Industry Inform, vol. 5, no. 3, pp. 267-277, 2009.         [ Links ]

[50] K. Weick, "Educational organizations as loosely coupled systems", Adm Sci Q, no. 21, pp. 1-9, 1976.         [ Links ]

[51] R. Schrenker and T. Cooper, "Building the Foundation for Medical Device Plug-and-Play Interoperability", Medical Electronics Manufacturing, pp. 10-21, 2001.         [ Links ]

[52] H. A. Schmid, "Framework Reuse over Different CIM Subdomains", in M. E. Fayad and R.E. Johnson, Domain-Specific Application Frameworks, New York, John Wiley and Sons Inc., 1999, pp. 67-84,         [ Links ]

[53] C. Schlotz and M. Röck, "Reorganization of a production department according to the CIMOSA concepts", Comput. Ind. Vol. 27, pp. 179-189, 1995.         [ Links ]

[54] P. Zuesongdham, "Combined Approach for Enterprise Modelling: CIMOSA and SOA as dynamic Architecture maritime logistics", in W. Kersten et al. (eds.), Innovativ Logistics Management. Competitive Advantages through new Processes and Services, Berlin, Erich Schmidt Verlag, 2007, pp. 134.         [ Links ]