SciELO - Scientific Electronic Library Online

 
vol.54 número2Extraction and Characterization of Oils from Three Mexican Jatropha SpeciesSpectrophotometric Determination of Citalopram Hydrobromide in Pharmaceuticals índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Journal of the Mexican Chemical Society

versão impressa ISSN 1870-249X

J. Mex. Chem. Soc vol.54 no.2 Ciudad de México Abr./Jun. 2010

 

Article

 

Study of the Surface Charge of a Porous Clay Heterostructure (PCH) and Its Adsorption Capacity of Alkaline Metals

 

Sofía Arellano–Cárdenas,1 Tzayhrí Gallardo–Velázquez,1* Guillermo Osorio–Revilla,2 and Ma. del Socorro López–Cortez1

 

1 Departamento de Biofísica. Escuela Nacional de Ciencias Biológicas del Instituto Politécnico Nacional. Plan de Ayala y Carpio, s/n. Col. Casco de Santo Tomás. México, 11340. D. F. Phone: (55) 57296000 ext. 62305. *Responsible author: tgallard@encb.ipn.mx.

2 Departamento de Ingeniería Bioquímica. Escuela Nacional de Ciencias Biológicas del Instituto Politécnico Nacional.

 

Received February 3, 2010
Accepted April 21, 2010

 

Abstract

A Porous Clay Heterostructure (PCH) was prepared by chemical modification of a natural clay, by intercalation of a cationic surfactant. Its surface charge properties as well as its adsorption capacity for alkali metals were studied using a potentiometric titration method. The PCH developed a pH–dependent charge (σH), probably due to the presence of amphoteric silanol groups (SiO2) coming from the pillars of silica interlayered during the pillared process. The PCH presented a region of zero charge in the range of pH of 4.0 to 7.7. The σH acquired by the PCH was adjusted with good correlation to the electric double layer model of Gouy–Chapman (r2 = 0.9925). The surface charge conferred the PCH ion exchange capacity for the studied metals (Li, Na, K, Rb and Cs) at high pH values (10 < pH), in comparable quantities (3.5 to 6 meq/g) to some Dowex resins. The results of this study suggest that PCH could have applications in the recovery of toxic metals from waste waters.

Key words: clay, PCH, metal adsorption, surface charge.

 

Resumen

Se preparó una arcilla porosa de estructura heterogénea (PCH) mediante la modificación química de una arcilla natural, intercalando un surfactante catiónico. Se estudiaron sus propiedades de carga superficial así como su capacidad de adsorción de metales alcalinos utilizando un método de titulación potenciométrica. La PCH desarrolló carga dependiente del pH (σH), debido probablemente a la presencia de grupos silanol (SiO2) provenientes de los pilares de silica intercalados durante el proceso de pilarización. La PCH presentó una región de carga cero en el intervalo de pH de 4.0 a 7.7. La σH adquirida por la PCH se ajustó con buena correlación al modelo de doble capa eléctrica de Gouy–Chapman (r2 = 0.9925). Esta carga superficial le confirió capacidad de intercambio iónico de los metales estudiados (Li, Na, K, Rb y Cs) a valores de pH altos (10.0 < pH), en cantidades comparables (3.5 a 6 meq/g) con algunas resinas Dowex. Los resultados de este estudio sugieren que la PCH puede tener aplicación en la remoción de metales tóxicos presentes en aguas residuales.

Palabras clave: arcilla, PCH, adsorción de metales, carga superficial.

 

DESCARGAR ARTÍCULO EN FORMATO PDF

 

References

1. Duarte–Davidson, R.; Troisi, G.; Capleton, A. A Screening Method for ranking Chemicals by their Fate and Behaviour in the Environment and Potential Toxic Effects in Human Following Non–occupational Exposure. Institute for Environment and Health, Leicester, UK. 2004.         [ Links ]

2. Jung, J.; Kim, J.; Suh, J, Lee, J.; Ryu, S. Wat. Res. 2001, 35, 937–942.         [ Links ]

3. Aguado, J.; Arsuaga, J. M.; Arencibia, A.; Lindo, M.; Gascón, V. J. Haz. Mat. 2009, 163, 213–221.         [ Links ]

4. Beck, J. S.; Vartuli, J. C.; Roth, W. J.; Leonowicz, M. E.; Kresge, C. T.; Schmitt, K. D.; Chu, T. W.; Olson, D. H.; Sheppard, E. W.; Mc Cullen, S. B.; Higgins, J. B.; Schlenker, J. L. J. Am. Chem. Soc. 1992, 114, 10834–10843.         [ Links ]

5. Galarneau, A.; Barodawalla, A.; Pinnavaia, T. J. Nature 1995, 374, 529–531.         [ Links ]

6. Cool, P.; Ahenach, J.; Collart, O.; Vansant, E. F. Stud. Surf. Sci. Catal. 2000, 129, 409–416.         [ Links ]

7. Pichowicz, M.; Mokaya, R. Chem. Commun. 2001, 2100–2101.         [ Links ]

8. Pinnavaia, T. J. US patent (US 5834391) 1998.         [ Links ]

9. Ahenach, J.; Cool, P.; Vansant, E. F. Phys. Chem. Chem. Phys. 2000, 2, 5750–5755.         [ Links ]

10. Polverejan, M.; Liu, Y.; Pinnavaia, T. J. Chem. Mater. 2002, 14, 2283–2288.         [ Links ]

11. Li, B.; Mao, H.; Li, X.; Ma, W.; Liu, Z. J. Colloid Interf. Sci. 2009, 336, 244–249.         [ Links ]

12. Wei, L.; Tang, T.; Huang, B. Micropor. Mesopor. Mat. 2004, 67, 175–179.         [ Links ]

13. Nunes, C. D.; Pires, J.; Carvalho, A. P.; Calhorda, M. J.; Ferreira, P. Micropor. Mesopor. Mat. 2008, 111, 612–619.         [ Links ]

14. Dyer, A.; Gallardo, V. T.; Roberts, C. W., in: Zeolites: Facts, Figures, Future, Jacobs, P. A.; Van Santen, R. A. Ed., Elsevier Applied Science, London, 1989, 389–398.         [ Links ]

15. Dyer, A.; Gallardo, V. T. in: Recent Developments in Ion Exchange, Williams, P.A.; Hudson, M.J. Ed., Elsevier Applied Science, London, 1990, 75–84.         [ Links ]

16. Arellano, C. S.; Gallardo, V. T. López, C. S.; Osorio, R. G. Rev. Soc. Quím. Mex. 2002, 46, 120–124.         [ Links ]

17. Stamberg, K.; Venkatesan, K. A.; Rao, V. P. R. Colloids Surfaces A 2003, 221, 149–162.         [ Links ]

18. Helmy, A. K.; Ferreiro, E. A.; De Busseti, S. G. Clays Clay Miner. 1994, 424, 444–450.         [ Links ]

19. Puanngam, M.; Unob, F. J. Hazard. Mater. 2008, 154, 578–587.         [ Links ]

20. Heidari, A., Younesi, H., Mehraban, Z. Chem. Eng. J. 2009, 153, 70–79.         [ Links ]

21. Mercier, L.; Pinnavaia, T. J. Micropor. Mesopor. Mater. 1998, 20, 101–106.         [ Links ]

22. Bejenlloun, M.; Cool, P.; Linssen, T.; Vansant, E. F. Micropor. Mesopor. Mater. 2001, 49, 83–94.         [ Links ]

23. Tassanapayak, R.; Magaraphan, R.; Manuspiya, H. Adv. Mater. Res. 2008, 55–57, 617–620.         [ Links ]

24. Arellano, C. S.; Osorio, R. G.; Gallardo, V. T.; López, C. S. Rev. Soc. Quím. Méx. 2003, 47, 240–244.         [ Links ]

25. Bain, D. C.; Smith, B. F. L. in: A Handbook in Determinative Methods in Clay Mineralogy, Wilson, M. J. Ed., Blackie, Glasgow, 1987, 111–120.         [ Links ]

26. Grim, R. E.; Kulbichi, G. Am. Miner. 1961, 56, 1329–1333.         [ Links ]

27. Goyne, K. W.; Zimmerman, A. R.; Newalkar, B. L.; Komarneni, S.; Brantley, S. L.; Chorover, J. J. Porous Mater. 2002, 9, 243–256.         [ Links ]

28. Parks, G. A. Chem. Rev. 1965, 65, 177–198.         [ Links ]

29. Gast, R. in: Minerals in soil environments. Dixon, J. B.; Weed, S. B.; Kittrick, J. A.; Milford, M. H.; White, J. L. Ed., Madison Wisconsin, USA, 1977, 27–73.         [ Links ]

30. Tran, H. H.; Roddick, F. A.; O'Donell, J. A. Wat. Res. 1999, 33, 2992–3000.         [ Links ]

31. Yang, R. T. Adsorbents. Fundamentals and applications. Ed., John Wiley & Sons Inc., New Jersey, 2003.         [ Links ]

32. Van Raij, B.; Peech, M. Soil. Sci. Soc. Amer. Pro. 1972, 36, 587–593.         [ Links ]

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons