SciELO - Scientific Electronic Library Online

 
vol.12 número3Effect of Heat Flux on Creep Stresses of Thick-Walled Cylindrical Pressure VesselsNonlinear Recursive Design for the Underactuated IWP System índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Journal of applied research and technology

versão On-line ISSN 2448-6736versão impressa ISSN 1665-6423

J. appl. res. technol vol.12 no.3 Ciudad de México Jun. 2014

 

Conductivity and Crystallinity of Polyethylene Oxide/Polyaniline Microfibers Obtained by Electrospinning

 

M. Olvera-Gracia*1 and J.R. Aguilar-Hernández2

 

1 ''Escuela Superior de Ingeniería Textil. Instituto Politécnico Nacional.

2 Escuela Superior de Física y Matemáticas. Instituto Politécnico Nacional. México, D. F., México. *manoloolvera@yahoo.com.mx

 

ABSTRACT

In this paper we present results concerning the processing and characterization of polyaniline microfibers obtained by the electrospinning technique. The electrospinning technique is used to produce micro and nano fibers, this technique uses an electric field to stretch the jet of the polymer and thus produce fibers, which are deposited on a collecting plate. The continuous fibers production will form some like a membrane. The fibers provide a large surface area due to their small diameter, therefore, interesting commercial and scientific application could be considered. In this study, fibers from a solution made of polyethylene oxide and polyaniline were obtained. Chloroform was used as solvents for these polymers. The fibers obtained were characterized by scanning electron microscopy, x-ray diffraction and electrical conductivity. These results indicate that the diameters of the composite fibers are on the micrometric range, the conductivity thereof is that of a semiconductor material and the degree of crystallinity corresponds to a semi-crystalline material.

Keywords: Polyaniline, Polyethylene Oxide, Microfibers, Crystallinity, Conductivity.

 

RESUMEN

En este trabajo se presentan resultados concernientes al procesamiento y caracterización de microfibras de polianilina obtenidas por la técnica de electrohilado. La técnica de electrohilado es usada para producir micro y nanofibras, esta técnica usa un campo eléctrico para estirar el chorro del polímero y así producir las fibras, las cuales son depositadas sobre un plato colector. La producción continua de fibras llega a ser en forma de una membrana. Las fibras proveen una gran área superficial por su pequeño diámetro y esto tiene un gran interés comercial y sus aplicaciones científicas son consideradas. Se ha usado cloroformo como solvente para estos polímeros. Las fibras obtenidas son caracterizadas por microscopia electrónica de barrido, difracción de rayos x y conductividad eléctrica. Los resultados indican que los diámetros del compósito de fibras están en un rango micrométrico, la conductividad muestra un comportamiento de un material semiconductor y el grado de cristalinidad corresponde a un material semicristalino.

Palabras clave: Polianilina, Oxido de polietileno, Microfibras, Cristalinidad, Conductividad.

 

DESCARGAR ARTÍCULO EN FORMATO PDF

 

References

[1] A. Formhals, US patent No. 1,975,504 (1934).         [ Links ]

[2] V. Jagadeesh Babu, V.S. Pavan Kumar, Bibekananda Sundaray, V.R.K. Murthy, T.S. Natarjan. Materials Science and Engineering B 142 (2007) 46-50.         [ Links ]

[3] W. Eong Teo, R. Gopal, R. Ramaseshan, K. Fujihara, S. Ramakrishna. Polymer 48 (2007) 3400-3405.         [ Links ]

[4] F. Dong, Z. Li, H. Huang, F. Yang, W. Zheng, C. Wang. Materials Letters 61 (2007) 2556-2559.         [ Links ]

[5] Y. Ju, J. Park, H. Jung, W. Lee. Electrochimica Acta 52 (2007) 4841-4847.         [ Links ]

[6] K. Myoung Yuna, C. Hogan, M.J. Matsubayashic, M. Kawabec, F. Iskandara, K. Okuyamaa. Chemical Engineering Science 62 (2007) 4751-4759.         [ Links ]

[7] M. Lia, Y. Guob, Y. Weib, A. MacDiarmidc, P. Lelkes. Biomaterials 27 (2006) 2705-2715.         [ Links ]

[8] M. Abareshi, S.M. Zebarjad and E.K. Goharshadi. Journal of Composite Materials 2009; 43.         [ Links ]

[9] Deshpande D.S., Bajpai R., Bajpai A.K. International Journal of Chemical Research Vol. 3, Issue 3, 2011, pp. 74-82.         [ Links ]

[10] T. Jose Benedict, S. Banumathi, A. Veluchamy, R. Gangadharan, A. Zulfihar Ahamad, S. Rajendran. Journal of Power Sources 75 1998. 171-174.         [ Links ]

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons