Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Similares en SciELO
Compartir
Superficies y vacío
versión impresa ISSN 1665-3521
Superf. vacío vol.24 no.2 Ciudad de México jun. 2011
Simulación y caracterización de un transductor ultrasónico utilizando Rexolite como acoplamiento acústico
Sánchez Domínguez Israel *, Acevedo Contla Pedro, Contreras Juan Antonio
UNAM - Instituto de Investigaciones en Matemáticas Aplicadas y en Sistemas Circuito Escolar s/n Ciudad Universitaria, C.P. 04510, Del. Coyoacán, México DF.
Recibido: 12 de septiembre de 2010;
Aceptado: 29 de abril de 2011
Resumen
Este artículo describe la simulación y caracterización de un transductor ultrasónico, empleando un nuevo material para ser utilizado como elemento de acoplamiento (matching). Este transductor fue simulado usando una cerámica piezoeléctrica comercial PIC255 a 8MHz, y el material que fue empleado como elemento de acoplamiento (matching) fue Rexolite, el cual presenta un excelente acoplamiento acústico. Las simulaciones realizadas con un software de elementos finitos, demostró el buen funcionamiento del transductor al contar con el Rexolite como elemento de acoplamiento. Permitiendo considerar al Rexolite como un material idóneo para trabajar y conseguir resultados óptimos, gracias a su maleabilidad y propiedades acústicas.
Palabras claves: Transductor ultrasónico; Rexolite; Simulación; Elementos finitos.
Abstract
This article describes the simulation and characterization of an ultrasonic transducer using a new material to be used as coupling (matching). This transducer was simulated using a commercial piezoelectric ceramic PIC255 at 8MHz, and the material that was used as matching was Rexolite, which features excellent acoustic coupling. The results obtained with finite element method software, demostrated the proper funtioning of the transducer to have the Rexolite as coupling. Rexolite consider allowing a suitable material to work and get results, because of its malleability and acoustic properties.
Keywords: Ultrasonic transducer; Rexolite; Simulation; Finite elements.
DESCARGAR ARTÍCULO EN FORMATO PDF
Agradecimientos
Los autores agradecen el apoyo de la DGAPA-UNAM (PAPIIT IN-1 13610).
Referencias
[1]. I. Sánchez, J. Contreras, P. Acevedo, M. Fuentes, "Simulación Mediante Elementos Finitos de Un Transductor Ultrasónico Tipo Arreglo (Array) Para Aplicaciones Médicas". SOMI XXIII, Congreso de Instrumentación, Xalapa, Veracruz, México, octubre de 2008, memorias en CD [ Links ]
[2]. Turnbull Daniel H., and FOSTER F. STUART, July 1992 "Fabrication and Characterization of Transducer Elements inTwo-Dimensional Arrays for Medical Ultrasound Imaging" [ Links ]
[3]. I. Sánchez Domínguez, P. Acevedo Contla, "Nueva caja de prueba para la selección de materiales en base a sus propiedades acústicas para la construcción de transductores piezoeléctricos ultrasónicos". SOMI XXIV, Congreso de Instrumentación, Mérida, Yucatán, México, octubre de 2009. [ Links ]
[4]. Whittingham T. A., Phys. Med. Biol. 36, 1503 (1991). [ Links ]
[5]. Y. Kagawa and T. Yamabuchi, IEEE Transactions on Sonics and Ultrasonics, 26, 81 (1979). [ Links ]
[6]. http://www.rexolite.com/ [ Links ]
[7]. http://www.physikinstrumente.com/ [ Links ]
[8]. Manual COMSOL 3.3: Manual Structural Mechanics Module pag 323 - 346, Version 3.3, Agosto 2006. [ Links ]
[9]. Manual COMSOL 3.3: Chapter 2 Acoustic Structure Interaction, Vibrations of a Disk Backed by an Air-Filled Cylinder, Agosto 2006. [ Links ]
[10]. http://www.comsol.com/multiphysics/piezoresistiveeffects/ [ Links ]
Nota
The Editors thank to the Physics Department of the Centro de Investigación y de Estudios Avanzados del IPN for the support in the publication of this issue, and the cooperation of M en C. Alejandra García Sotelo and Eng. Erasmo Gómez.