Materiales

 

Preparation of cellulose nanoparticles from agave waste and its morphological and structural characterization

 

Preparación de nanopartículas de celulosa a partir de desechos de agave y su caracterización morfológica y estructural

 

C.E. Ponce-Reyes¹, J.J. Chanona-Pérez¹*, V. Garibay-Febles², E. Palacios-González², J. Karamath², E. Terrés-Rojas², G. Calderón-Domínguez¹

 

¹ Departamento de Ingeniería Bioquímica, Prolongación de Carpió y Plan de Ayala s/n, (Col. Santo Tomas C.P. 11340 Miguel Hidalgo. Escuela Nacional de Ciencias Biológicas, Instituto Politécnico Nacional. México, D.F. * Corresponding author. E-mail: jorge_chanona@hotmail.com.

² Laboratorio de Microscopia de Ultra Alta Resolución, Eje Central Lázaro Cárdenas Norte 152 Col. San Bartolo Atepehuacan C.P 07730) (Gustavo A. Madero. Instituto Mexicano del Petróleo. México, D.F.

 

Received May 9, 2014.
Accepted June 20, 2014.

 

Abstract

Agave is a natural waste from many different industries in Mexico, so alternative uses for these fibrous waste materials are desirable. Cellulose nanoparticles were obtained from dried agave leaves by acid hydrolysis. The characterization of the nanoparticles was made using scanning electron microscopy (SEM), Fast Fourier transformation infrared (FTIR) solid state nuclear magnetic resonance (ssNMR), X-ray diffraction (XRD) and high resolution transmission electron microscopy (HR-TEM). The nanoparticles had an average size of 97 ± 30 nm within a range of 31-198 nm, with a quasi-spherical and polyhedral morphology associated to a shape factor of 0.78 ± 0.06. The FTIR results revealed that the cellulose nanoparticles showed the characteristic cellulose peaks. Meanwhile, ssNMR showed the main peaks of the cellulose there was a difference in the peaks presence and absence when comparing to the cellulose pattern, which was associated to a lower crystallinity of the agave nanoparticles. In addition, the nanoparticles had a triclinic crystalline structure and a crystallinity index of 39% confirmed by HR-TEM and XRD. This study is important for a facile obtention of green nanomaterials from agroindustrial waste.

Keywords: agave waste, cellulose nanoparticles, crystallinity, microscopy, spectroscopy.

 

Resumen

El agave es un deshecho natural de diferentes industrias de México, por lo tanto, los usos alternativos de estos deshechos fibrosos son deseables. Nanopartículas de celulosa fueron producidas desde hojas de agave deshidratadas por hidrolisis acida. La caracterización de estas nanopartículas se llevo a cabo mediante microscopia electrónica de barrido (SEM), espectroscopia infrarroja con transformada de Fourier (FTIR), difracción de rayos X (XRD), resonancia magnética nuclear de estado sólido (ssNMR) y microscopia electrónica de transmisión de alta resolución (HRTEM). Las nanopartículas tuvieron un tamaño promedio de 97 ± 30 nm en un intervalo entre 31-198 nm y con morfología cuasi-esférica y poliédrica asociado a un factor de forma de 0.78 ± 0.06. Los resultados de la FTIR revelaron que las nanopartículas poseen los picos característicos de la celulosa, mientras que el espectro de ssNMR confirmo su naturaleza celulósica. Sin embargo, hubo diferencia en la presencia de picos en comparación con el espectro de la celulosa patrón, que fue asociado a una menor cristalinidad de las nanopartículas de agave. Además, las nanopartículas tuvieron una estructura cristalina triclínica y un índice de cristalinidad del 39 %, lo cual fue establecido mediante HRTEM y XRD. Este estudio es importante para la fácil obtención de nanomateriales verdes desde residuos agroindustriales.

Palabras clave: desechos de agave, nanopartículas de celulosa, cristalinidad, microscopía, espectroscopía.

 

DESCARGAR ARTÍCULO EN FORMATO PDF

 

Acknowledgements

Claudia Ericka Ponce Reyes wishes to thank CONACYT for the scholarship provided for her studies and international stay. This research was funded through projects 20110627 and 20121001, 20130333 and 20140387 at the Instituto Politécnico Nacional (SIP-IPN México) and133102 of CONACYT.

 

References

Ali, M; Apperley, D; Eley, C; Emsley, A; Harris, R. (1996). A solid-state NMR study of cellulose degradation. Cellulose 3, 77-90.         [ Links ]

Ansari, A; Naziruddin, M; Alhosan, M; Aldwayyan, A. (2010). Nanostructured materials: classification, properties, fabrication, characterization and their applications in biomedical sciences. Nanoparticles: properties, classification, characterization and fabrication. Nova. New York. 1:1-78.         [ Links ]

Askeland, D. (1987). La Ciencia e Ingeniería de los Materiales. Grupo Editorial Iberoamérica. México, D.F.         [ Links ]

Baker, R; Coburn, S; Liu, C; Tetteh, J. (2005). Pyrolysis of saccharide tobacco ingredients: a TGA-FTIR investigation. Journal of Analytical and Applied Polymers 74, 171-180.         [ Links ]

Baird, M.S; Hamlin, J.D; O?sullivan, A; Whiting, A. (2008). An insight into the mechanism of the cellulose dyeing process: Molecular modeling and simulations of cellulose and its interactions with water, urea, aromatic azo-dyes and aryl ammonium compounds. Dyes and Pigments.         [ Links ]

Blackwell, J. Kolpak, F.J, Gadner, K.H. (1987). Structures of Native and Regenerated Celluloses, The Structures of Cellulose. Characterization of the solid States. Rajai H. Atalla Editor, American Society. Washington D.C.         [ Links ]

Bolio-López, G.I., Váladez-González, A., Veleva, L., Andreeva, A. (2011). Whiskers de celulosa a partir de residuos agroindustriales de banano: obtención y caracterización. Revista Mexicana de Ingeniería Química 10, 291-299.         [ Links ]

Bolio-López, G.I., Veleva, L., Váladez-González, A. and Quintana-Owen, P. (2013). Weathoering and biodegradation of polylactic acid composite reinforced with cellulose whiskers. Revista Mexicana de Ingeniería Química 12, 143-153.         [ Links ]

Burr, I.W. (1942). Cumulative frequency functions. Annals of Mathematical Statistics 13, 215-232.         [ Links ]

Colodette, J.L. (1989). Química da Madeira Vicosa. UFV50, 201-338.         [ Links ]

Coronel, E. O. (1994). Fundamentos de las propiedades físicas y mecánicas de las maderas. Primera Parte. Facultad de Ciencias Forestales. Universidad Nacional Santiago del Estero. Argentina. p.13-28.         [ Links ]

Cruz-Estrada, R.H., Fuentes-Carrillo P., Martínez-Domínguez O., Canché-Escamilla G. and García-Gómez C. (2006). Obtención de materiales compuestos a base de desechos vegetales y polietileno de alta densidad. Revista Mexicana de Ingeniería Química 5, 29-34.         [ Links ]

Elazzouzi-Hafraoui, S. Nishiyama, Y. Putaux, J.L. Heux, L. Dubreuil, F. And Rochas, C. (2008). The Shape and Size Distribution of Crystalline Nanoparticles Prepared by Acid Hydrolysis of Native Cellulose. Biomacromolecules 9, 57-65.         [ Links ]

García-Mendoza, A. (2002). Distribution of the genus Agave (Agavaceae) and its endemic species in México. Cactus and Succulent Journal 74, 177-187.         [ Links ]

García, R . M; Flores, N; Martínez, H. E; Rutiaga, J. G. Identificación y caracterización de nanocristales de Celulosa obtenidos mediante emulsión inversa y Ultrasonicación térmica. X National Congress of Microscopy. Morelia, Mich. 2010.         [ Links ]

Gil Vega,K; González Chavira, M; Martínez de la Vega, O; Simpson, J; Vandemark, G. (2001). Analysis of genetic diversity in Agave tequilana var. Azul using RAPD markers. Euphytica 119, 335-341.         [ Links ]

Gradwell, S. E., Renneckar, S., Esker, A. R., Heinze, T., Gatenholm, P., Vaca-Garcia, C. (2004). Surface modification of cellulose fibers: towards wood composites by biomimetics. Comptes Rendus Biologies 327, 945-953.         [ Links ]

Gumeta-Chávez, C; Chanona-Pérez, J.J; Mendoza-Pérez, J.A; Terreís-Rojas, E; Garibay-Febles, V; Gutiérrez-López, G.F. (2011). Shrinkage and Deformation of Agave atrovirens Karw Tissue during Convective Drying: Influence of Structural Arrangements. Drying Technology 29, 612- 623.         [ Links ]

Hepworth, D. (2000). The Mechanical Properties of a Composite Manufactured from Non Fibrous Vegetable Tissue y PVA. Composites. Part A. 31, 283-285.         [ Links ]

Horii, E, Hirai, A. and Kitamaru, R. (1984). CPMAS carbon-13 NMR study of spin relaxation phenomena of cellulose containing crystalline and noncrystalline components. J. Carbohydr. Chemi. 3, 641-662.         [ Links ]

Hubbe, M; Rojas, O; Lucia, L; Sain, M. (2008). Cellulosic Nanocomposites: a review. BioResources 3, 929-980.         [ Links ]

Inpanya, P; Faikrua, A; Ounaroon, A; Sittichokechaiwut, A; Viyoch, J. (2012). Effects of the blended fibroin/aloe gel film on wound healing in streptozotocin-induced diabetic rats. Biomedical Matter 7, 1-14.         [ Links ]

Kallioranta, S. (2012) Who is in control in the packaging industry? Paper 360°. TAPPI 7, 14-16.         [ Links ]

Liitiä, T; Maunu, S.L; Hortling, B; Tamminen, T; Pekkala, O; Varhimo, A. (2003). Cellulose crystallinity and ordering of hemicelluloses in pine and birch pulps as revealed by solid-state NMR spectroscopic methods. Cellulose 10, >307-316.         [ Links ]

Macia, M. (2006). The fiber plants. Revista Botanica Econoímica de los Andes Centrales, 370-384.

Narvaez-Zapata, J; Sánchez-Teyer, l. (2009). Agave as a raw material: Recent technologies and applications. Recent Patents on Biotechnology 3, 185-191.         [ Links ]

Nishiyama, Y; Sugiyama, J; Chanzy, H; Langan, P. (2003). Crystal Structure and Hydrogen Bonding System in Cellulose I? from Synchrotron X-ray and Neutron Fiber Diffraction. JACS articles, published in Web.

Nystrom, G; Mihranyan,A; Razaq, A; Lindstrom, T; Nyholm, T; Str0mme, M. (2010). A Nanocellulose Polypyrrole Composite Based on Microfibrillated Cellulose from Wood. Journal of Physcal Chemistry 114, 4178-4182.         [ Links ]

Qing, Y; Sabo, R; Wu, Y; Cai, Z. (2012). High- Performance cellulose nanofibril composite films. BioResouces 7, 3064-3075.         [ Links ]

Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A. (2006).The path forward for biofuels and biomaterials. Science 311, 484-489.         [ Links ]

Samir, M. A. S. A; Alloin, F; Dufresne, A. (2005). Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field. Biomacromolecules 6, 612-626.         [ Links ]

Siqueira, G; Bras J; Dufresne, A. (2009). Cellulose Whiskers versus Microfibrils: Influence of the Nature of the Nanoparticle and its Surface Functionalization on the Thermal and Mechanical Properties of Nanocomposites. Biomacromolecules 10, 425-432.         [ Links ]

Tang, E.O., Chow, D.C.: US20060222719 (2006).

Thygesen, A; Oddershede, J; Liholt, H; Thomsen, A.B; Sta, K. (2005). On the determination of crystallinity and cellulose content in plant fibres. Cellulose 12, 563-576.         [ Links ]

Vander Hart, D. L.; Atalla, R. H. (1984). Studies of microstructure in native celluloses using solidstate 13C NMR. Macromolecules 17, 1465-1472.         [ Links ]

Zhang, J., Elder, T., Pu, Y., Ragasukas, A. (2007). Facile synthesis of spherical cellulose nanoparticles. Carbohydrate Polymers 69, 607-611.         [ Links ]