SciELO - Scientific Electronic Library Online

 
vol.13 número2Efecto del contenido de humedad y de la temperatura, en las propiedades reológicas, microestructurales y térmicas de masa de una variedad de maíz (Zea mays sp.) híbridoCambios en las propiedades de deformación de la masa durante la fermentación por Lactobacillus y su relación con la microestructura índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Revista mexicana de ingeniería química

versión impresa ISSN 1665-2738

Rev. Mex. Ing. Quím vol.13 no.2 Ciudad de México ago. 2014

 

Artículos regulares/Ingeniería de alimentos

 

Stabilizing oil-in-water emulsions with yam bean (Pachyrhizus erosus L. urban) solids

 

Estabilización de emulsiones aceite-en-agua con sólidos de jícama (Pachyrhizus erosus L. urban)

 

Y. Carrera1, E. García-Márquez2, E. Aguirre-Mandujano3, M.E. Rodríguez-Huezo4* and J. Álvarez-Ramírez1

 

1 Departamento de Ingeniería de Procesos e Hidráulica. Universidad Autónoma Metropolitana-Iztapalapa. Apartado Postal 55-534, Iztapalapa, 09340 México.

2 Unidad de Tecnología Alimentaria, Centro de Investigación y Asistencia, en Tecnología y Diseño del Estado de Jalisco, A.C. Av. Normalistas 800, Guadalajara, Jalisco 44270, México.

3 Departamento de Preparatoria Agrícola, Universidad Autónoma Chapingo, Km 38.5 Carretera México-Texcoco, 56230 Texcoco, México.

4 Depto. Ingeniería Química y Bioquímica, Tecnológico de Estudios Superiores de Ecatepec, Av. Tecnológico s/n esq. Av. Central, Col. Valle de Anáhuac, 55210, Ecatepec, México. *Corresponding author. E-mail: eva_rodriguez_huezo@hotmail.com.

 

Received April 11, 2014.
Accepted May 24, 2014.

 

Abstract

Yam bean (Pachyrhizus erosus L. Urban) solids (YS) were used at concentrations of 3, 5 and 7 % w/w for stabilizing oil-in-water emulsions with a 0.15 mass fraction (E3, E5 and E7). Higher YS concentrations produced emulsions with smaller average particle size distribution, more marked shear thinning behaviour, and higher solid-like (tan δ < 1) viscoelastic properties. Optical micrographs revealed that the rheological properties, particle size distribution, and stability of the emulsions were predominantly associated to the formation of 3-D particles network in the continuous phase that immobilized the emulsion droplets. The micrographs also showed small sized YS fragments adsorbed at the oil-water interface, contributing with a steric stabilization term to emulsions stability. Variations in the rheological properties of the emulsions with aging time (14 days) were less pronounced when using higher YS concentrations.

Keywords: yam bean solids, solids network formation, oil-in-water emulsions, stability, rheology.

 

Resumen

Se usaron sólidos (YS) de jícama (Pachyrhizus erosus L. Urban) en concentraciones de 3, 5 y 7 % p/p para estabilizar emulsiones aceite-en-agua con una fracción másica de 0.15 (E3, E5 y E7). Mayores concentraciones de YS produjeron emulsiones con tamaño de distribución de partícula menor, un comportamiento reoadelgazante más pronunciado, y propiedades viscoelásticas sólidas mayores (tan δ < 1). Micrografías ópticas develaron que las propiedades reológicas, el tamaño de distribución de partícula y la estabilidad de las emulsiones estuvieron predominantemente asociadas a la formación de una estructura entrelazada 3-D de las partículas en la fase continua que inmovilizaron las gotas de la emulsión. Las micrografias también mostraron la adsorción de pequeños fragmentos de YS en la interfase aceite-agua, que contribuyeron a estabilizar la emulsión con un potencial de repulsión de origen estérico. Las variaciones en las propiedades reológicas respecto al tiempo de almacenamiento (14 días) fueron menores al usarse concentraciones de YS mayores.

Palabras clave: sólidos de jícama, formación de una estructura entrelazada de sólidos, emulsiones aceite-en-agua, estabilidad, reología.

 

DESCARGAR ARTÍCULO EN FORMATO PDF

 

Acknowledgment

Authors thank for financial support through SAGARPA grant 109799.

 

References

Amaya-Llano, S.L., Martínez-Alegría, A.L., Zazueta-Morales, J.J. and Martínez-Bustos, F. (2008). Acid thinned jicama and maize starches as fat substitute in yogurt. LWT-Food Science and Technology 41, 1274-1281.         [ Links ]

AOAC. (1995). Association of Official Analytical Chemists (16th ed.). Arlington, USA.         [ Links ]

Bhandari, M. R., Kasai, T. and Kawabata, J. (2003). Nutritional evaluation of wild yam (Dioscorea spp.) tubers from Nepal. Food Chemistry 82, 619-623.         [ Links ]

Chanamai, R. A. D. J. M. and McClements, D. J. (2002). Comparison of gum Arabic, modified starch, and whey protein isolate as emulsifiers: influence of pH, CaCl2 and temperature. Journal of Food Science 67, 120-125.         [ Links ]

Chevalier, Y. and Bolzinger, M.A. (2013). Emulsions stabilized with solid nanoparticles: Pickering emulsions. Colloids and Surfaces A: Physicochemical and Engineering Aspects 439, 23-34.         [ Links ]

Colin, V.L., Pereira, C.E., Villegas, L.B., Amoroso, M.J. and Abate, C.M. (2013). Production and partial characterization of bioemulsifier from a chromium-resistant actinobacteria. Chemosphere 90, 1372.         [ Links ]

Dias, A.B., Müller, C.M.O., Larotonda, D.S.F. and Laurindo, J.B. (2010). Biodegradables films based on rice and rice flour. Journal of Cereal Science 51, 213-219.         [ Links ]

Dickinson, E. (2010). Food emulsions and foams: Stabilization by particles. Current Opinion in Colloid & Interface Science 15, 40-49.         [ Links ]

Dickinson E. (2012). Emulsion gels: The structuring of soft solids with protein-stabilized oil droplets. Food Hydrocolloids 28, 224-241.         [ Links ]

Dzul-Cauich, J.G., Lobato-Calleros, C., Pérez-Orozco, J.P., Alvarez-Ramirez, J. and Vernon-Carter, E.J. (2013). Stability of water-in-oil-in-water multiple emulsions: Influence of the interfacial properties of milk fat globule membrane. Revista Mexicana de Ingeniería Química 12, 425-436.         [ Links ]

Fouconnier, B., Roman-Guerrero, A. and Vernon-Carter, E.J. (2012). Effect of [CTAB]-[SiO] ratio on the formation and stability of hexadecane/water emulsions in the presence of NaCl. Colloids and Surfaces A: Physicochemical and Engineering Aspects 400, 10-17.         [ Links ]

Golemanov, K., Tcholakova, S., Denkov, N., Pelan, E. and Stoyanov, S.D. (2012). Surface shear rheology of saponin adsorption layers. Langmuir 28, 12071-12084.         [ Links ]

Jones, O.G. and McClements, D.J. (2010). Functional biopolymer particles: design, fabrication, and applications. Comprehensive Reviews in Food Science and Food Safety 9, 374-397.         [ Links ]

Kragel, J. and Derkatch, S.R. (2010). Interfacial shear rheology. Current Opinion in Colloid & Interface Science 15, 246-255.         [ Links ]

Lorenzo, G., Zaritzky, N. and Califano, A. (2013). Rheological analysis of emulsion-filled gels based on high acyl gellan gum. Food Hydrocolloids 30, 672-680.         [ Links ]

Makkar, R. S., Cameotra, S. S. and Banat, I. M. (2011). Advances in utilization of renewable substrates for biosurfactant production. AMB Express 1, 1-19.         [ Links ]

Mali, S., Grossmann, M. V. E., García, M. A., Martino, M. N. and Zaritzky, N. E. (2004). Barrier, mechanical and optical properties of plasticized yam starch films. Carbohydrate Polymers 56, 129-135.         [ Links ]

McClements, D.J. (2005). Food emulsions: Principles, practices, and techniques (2nd ed.). CRC Press, Boca Raton.         [ Links ]

Morse, E. E. (1947). Anthrone in estimating low concentrations of sucrose. Analytical Chemistry 19, 1012-1013.         [ Links ]

Murray, B.S., Durga, K., Yusoff, A. and Stoyanov, S.D. (2011). Stabilization of foams and emulsions by mixtures of surface active food-grade particles and proteins. Food Hydrocolloids 25, 627-638.         [ Links ]

Nadine, M., Rousseau, D. and Ghosh, S. (2014). Fat crystal-stabilized water-in-oil emulsions as controlled release systems. LWT - Food Science and Technology 56, 248-255.         [ Links ]

N'da Kouamé, V., Handschin, S., Derungs, M., Amani, G. and Conde-Petit, B. (2011). Thermal properties of new varieties of yam starches. Starch/Stärke 63, 747.         [ Links ]

Nindjin, C., Amani, G.N. and Sindic, M. (2011). Effect of blend levels on composite wheat doughs performance made from yam and cassava native starches and bread quality. Carbohydrate Polymers 86, 1637-1645.         [ Links ]

Pal, R. (1996). Rheology of emulsions containing polymeric liquids. In: Encyclopedia of Emulsion Technology Vol. 4, (P. Becher, ed.), Pp. 93-264. CRC Press, New York.         [ Links ]

Puncha-Arnon, S. and Uttapap, D. (2013). Rice starch vs. rice flour: Differences in their properties when modified by heat-moisture treatment. Carbohydrate Polymers 91, 85.         [ Links ]

Ramirez-Santiago, C., Ramos-Solis, L., Lobato-Calleros, C., Peña-Valdivia, C., Vernon-Carter, E. J. and Alvarez-Ramírez, J. (2010). Enrichment of stirred yogurt with soluble dietary fiber from Pachyrhizus erosus L. Urban: Effect on syneresis, microstructure and rheological properties. Journal of Food Engineering 101, 229-235.         [ Links ]

Ramos-de-la-Peña, A.M., Renard, C.M.G.C., Wicker, L. and Contreras-Esquivel, J.C. (2013). Advances and perspectives of Pachyrhizus spp. in food science and biotechnology. Trends in Food Science and Technology 29,44-54.         [ Links ]

Rayner, M., Timgren, A., Sjöö, M. and Dejmek, P. (2012). Quinoa starch granules: a candidate for stabilising food-grade Pickering emulsions. Journal of the Science of Food and Agriculture 92, 1841-1847.         [ Links ]

Sherman, P. (1968). General properties of emulsions and their constituents. In: Emulsion Science, (P. Sherman, ed.), Pp. 217-351. Academic Press, London.         [ Links ]

Schoeler, B., Poptoshev, E. and Caruso, F. (2003). Growth of multilayer films of fixed and variable charge density polyelectrolytes: effect of mutual charge and secondary interactions. Macromolecules 36, 5258-5264.         [ Links ]

Stevenson, D. G., Jane, J., & Inglett, G. E. (2007). Characterisation of Jicama (Mexican Potato) (Pachyrhizus erosus L. Urban) Starch From Taproots Grown in USA and Mexico. Starch/Starke 59, 132-140.         [ Links ]

Vignati, E., Piazza, R. and Lockhart, T. P. (2003). Pickering emulsions: interfacial tension, colloidal layer morphology, and trapped-particle motion. Langmuir 19, 6650-6656.         [ Links ]

Winuprasith, T. and Suphantharika, M. (2013). Microfibrillated cellulose from mangosteen (Garcinia mangostana L.) rind: Preparation, characterization, and evaluation as an emulsion stabilizer. Food Hydrocolloids 32, 383-394.         [ Links ]

Zinoviadou, K. G., Scholten, E., Moschakis, T. and Biliaderis, C. G. (2012). Properties of emulsions stabilised by sodium caseinate-chitosan complexes. International Dairy Journal 26, 94-101.         [ Links ]

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons