Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Similares en SciELO
Compartir
Computación y Sistemas
versión On-line ISSN 2007-9737versión impresa ISSN 1405-5546
Comp. y Sist. vol.16 no.1 Ciudad de México ene./mar. 2012
Artículos
Diseño óptimo de transformadores de Hilbert sin multiplicadores con base en el uso de un subfiltro simple
Optimal Design of Multiplierless Hilbert Transformer based on the Use of a Simple Subfilter
David E. Troncoso Romero, Miriam G. Cruz Jiménez y Gordana Jovanovic Dolecek
Departamento de Electrónica, Instituto Nacional de Astrofísica, Óptica y Electrónica (INAOE), Puebla, México. Correo: dtroncoso@inaoep.mx, miriam_gcj@inaoep.mx, gordana@inaoep.mx.
Artículo recibido el 29/11/2010.
Aceptado el 07/03/2011.
Resumen
Los transformadores de Hilbert altamente selectivos pueden ser diseñados eficientemente mediante el método de Transformación en Frecuencia (Frequency Transformation, FT), donde un bloque básico, formado con dos subfiltros idénticos, es implementado repetidamente. El número de bloques utilizados se obtiene de la longitud de un filtro prototipo. Recientemente se ha utilizado la técnica SegmentaciónIntercalamiento (PipeliningInterleaving, PI) para evitar el uso repetitivo del bloque básico, reduciendo el número de coeficientes requeridos. Sin embargo, el diseño del subfiltro y del filtro prototipo está basado en una búsqueda heurística. En este artículo se presenta el método óptimo para diseñar el subfiltro y el filtro prototipo, minimizando el número de coeficientes. Además, se propone una estructura alternativa que permite utilizar únicamente un subfiltro dentro del bloque básico. Como resultado, el número total de coeficientes es disminuido. Se demuestra con un par de ejemplos que el método de diseño es óptimo, simple y eficiente.
Palabras Clave: Filtros digitales, transformador de Hilbert.
Abstract
Very sharp Hilbert transformers can be efficiently designed by using the Frequency Transformation (FT) method, where a basic building block, formed with two identical subfilters, is repeatedly implemented. The number of the building blocks used is obtained from the length of a prototype filter. Recently, the PipeliningInterleaving (PI) technique has been applied to avoid the repetitive use of the basic building block, reducing the number of required coefficients. However, the design of the subfilter and the prototype filter is based on a heuristic search. In this paper, we present an optimal method to design the subfilter and prototype filter minimizing the number of coefficients. Additionally, an alternative structure, which permits to use a unique subfilter inside the basic building block, is presented. As a result, the total number of coefficients is decreased. Two examples show that the proposed design method is optimal, simple, and efficient.
Keywords: Digital filters, Hilbert transformer.
DESCARGAR ARTÍCULO EN FORMATO PDF
Referencias
1. Antoniou, A. (2006). Digital Signal Processing: Signals, Systems and Filters. New York: McGrawHill. [ Links ]
2. CruzJiménez, M.G., TroncosoRomero, D.E. & JovanovicDolecek, G. (2010). On design of a multiplierless very Sharp Hilbert transformer by using identical subfilters. 53rd IEEE International Midwest Symposium on Circuits and Systems, Washington, USA, 757760. [ Links ]
3. Jiang, Z. & Willson Jr., A.N. (1997). Efficient digital filtering architectures using pipelining/interleaving. IEEE Transactions Circuits and Systems II Analog and Digital Signal Processing, 44(2), 110119. [ Links ]
4. Kodek, D.M. (1980). Design of optimal finite wordlength FIR digital filters using integer programming techniques. IEEE Transactions Acoustic Speech. Signal Processing, 28(3), 304308. [ Links ]
5. Lai, Y. & Lin, T.P. (1989). Design of Hilbert transformers by multiple use of the same subfilter. Electronics Letters, 25(19), 12881290. [ Links ]
6. Lehto, R., Saramaki, T., & Vainio, O. (2009). Synthesis of wideband linearphase FIR filters with a piecewisepolynomialsinusoidal impulse response. Circuits, Systems and Signal Processing, 29(1), 2550. [ Links ]
7. Lim, Y.C. & Yu, Y.J. (2005). Synthesis of very sharp Hilbert transformer using the frequencyresponse masking technique. IEEE Transactions Signal Processing, 53(7), 25952597. [ Links ]
8. Lim, Y.C., Yu, Y.J., & Saramaki, T. (2005). Optimum masking levels and coefficients sparseness for Hilbert transformers and halfband filters designed using the frequencyresponse masking technique. IEEE Transactions Circuits and Systems I: Reg. Papers, 52(11), 24442453. [ Links ]
9. Saramaki, T. (1987). Design of FIR filters as a tapped cascaded interconnection of identical subfilters. IEEE Transactions Circuits and Systems, 34(9), 1011 1029. [ Links ]
10. Vinod, P., Lai, E., Maskell, D.L., & Meher, P.K. (2010). An improved common subexpression elimination method for reducing logic operators in FIR filter implementations without increasing logic depth. Integration, the VLSI Journal, 43(1), 124135. [ Links ]