SciELO - Scientific Electronic Library Online

 
vol.25 número3Bebidas alcohólicas artesanales elaboradas con uva Vitis tiliifolia en MéxicoEfecto del tostado sobre el valor nutricio y componentes antioxidantes de la semilla de capomo (Brosimum alicastrum: Moraceae) índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Revista Chapingo. Serie horticultura

versión On-line ISSN 2007-4034versión impresa ISSN 1027-152X

Rev. Chapingo Ser.Hortic vol.25 no.3 Chapingo sep./dic. 2019  Epub 29-Mayo-2020

https://doi.org/10.5154/r.rchsh.2019.05.008 

Scientific article

Harper-type melon hybrids have higher quality and longer post-harvest life than commercial hybrids

Verónica García-Mendoza1 

Pedro Cano-Ríos1 

José Luis Reyes-Carrillo1  * 

1Universidad Agraria Antonio Narro. Blvd. Raúl López Sánchez km 2, Torreón Coahuila, C. P. 27054, MÉXICO.


Abstract

In the Comarca Lagunera, the melon is considered the most important vegetable crop, so there is interest in venturing into new export markets for which various ways of preserving the fruit have been investigated. The new Harper-type melon hybrids have higher fruit quality, longer post-harvest life and higher yields than commercial ones. The objective of this work was to identify new Harper-type melon hybrids with longer post-harvest life to reach distant markets. Three Harper-type melon hybrids (King RZ, Queen RZ, Alaniz Gold) were evaluated against a control of the region (Cruiser F1). The experiment was carried out in Matamoros, Coahuila, Mexico, under a randomized block design. The post-harvest life of the fruits stored at 18 °C was evaluated at 10, 20 and 30 days, from the weight loss percentage and the speed factor thereof. There was no significant difference in fruit weight and yield. Queen RZ and King RZ hybrids had the highest total soluble solids values at the time of harvest (13.62 and 13.42 °Brix, respectively) and 30 days post-harvest (10.25 and 10.44 °Brix, respectively) (P ≤ 0.05). Both were marketable after 30 days of storage, sufficient to reach distant markets.

Keywords Cucumis melo L.; exportation; firmness; total soluble solids; weight loss

Resumen

En la Comarca Lagunera, el melón es considerado el cultivo vegetal más importante, por lo que existe interés en abrir nuevos mercados de exportación para los que se han investigado diversas formas de conservación de la fruta. Los nuevos híbridos de melón tipo Harper tienen una mayor calidad de fruta, mayor vida poscosecha y mayores rendimientos en comparación con los híbridos comerciales. El objetivo de este trabajo fue identificar nuevos híbridos de melón tipo Harper con una vida poscosecha mayor para llegar a mercados lejanos. Se evaluaron tres híbridos de melón tipo Harper (King RZ, Queen RZ, Alaniz Gold) contra un control de la región (Cruiser F1). El experimento se llevó a cabo en Matamoros, Coahuila, México, bajo un diseño de bloques aleatorios. La vida poscosecha de los frutos almacenados a 18 °C se evaluó a los 10, 20 y 30 días a partir del porcentaje de pérdida de peso y su factor de velocidad. No se observaron diferencias significativas en el peso de la fruta y el rendimiento. Los híbridos Queen RZ y King RZ presentaron los mayores valores de sólidos solubles totales al momento de la cosecha (13.62 y 13.42 °Brix, respectivamente) y a los 30 días después de la cosecha (10.25 y 10.44 °Brix, respectivamente) (P ≤ 0.05). Ambos híbridos fueron comercializables después de 30 días de almacenamiento, suficiente para llegar a mercados lejanos.

Palabras clave Cucumis melo L.; exportación; firmeza; sólidos solubles totales; pérdida de peso

Introduction

Cucumis melo L. (melon) is a perishable fruit due to its high moisture content, hence the importance of finding new ways to preserve it for its storage and transportation. Freezing is one of the most widely used methods, but it reduces its quality by causing irreversible damage (Ayala-Aponte & Cadena, 2014). Identifying the exact point of fruit cooling for its conservation without degrading its cellular structure is very difficult (Chassagne-Berces et al., 2009). Post-harvest storage of melon requires low temperatures (2.2 to 5.0 °C) that enable preserving it for up to 21 days; however, if lower temperatures are applied, they can cause freeze damage (Suslow, Cantwell, & Mitchell, 2002), which is why it is important to find different ways of preserving the fruit to avoid economic losses.

Control of environmental variables such as relative humidity and temperature help to reduce damage caused by rottenness, as well as the use of natural alternatives such as chitosan (Bautista-Baños, Hernández-Lauzardo, Velázquez-del Valle, Bosquez-Molina, & Sánchez-Domínguez, 2005; de Oliveira et al., 2014). Several technologies have been evaluated to preserve the firmness and quality of melon for a longer period of time, including the regulation of temperatures at low levels, the application of waxy mixtures and the use of 1-methylcyclopropene (1-MCP) as an inhibitor of ethylene to delay maturation (Alanís-Guzman, García-Díaz, Reyes-Avalos, & Meza-Velázquez, 2013; García-Robles, Quintero-Ibarra, Mercado-Ruiz, & Báez-Sañudo, 2016; Li et al., 2011).

To avoid disease and obtain good melon quality and greater post-harvest life, good fertilization is needed before harvest (Alves-Ferreira et al., 2015; Flores et al., 2013). Among the cucurbits, the melon crop has demanding fertilization needs (Lima-de Deus, Soares, Lima-Neves, Francismar-de Medeiros, & Rodrigues-de Miranda, 2015); therefore, products based on carboxylic acids and calcium are applied to increase the quality, amount and shelf life of the fruit (Román-Moreno & Gutiérrez-Coronado, 1998), although obtaining a long post-harvest life is also linked to good crop management.

Consumption of melon is related to the content of total soluble solids (TSS), which is responsible for the sweet taste since it has been established that if a melon fruit has less than 9 °Brix, it is not marketable; if it contains between 9 and 12 °Brix, it is marketable, and if it contains more than 12 °Brix, it possesses an extra quality (Vargas, Castoldi, de Oliveira-Charlo, & Trevizan-Braz, 2008). In addition to the TSS, high quality standards with characteristics such as the internal and external appearance of the fruit and the thickness of the pulp are what determine consumer acceptance (Vargas et al., 2008). The different melon genotypes have different organoleptic characteristics, yields, resistance to pests and diseases, fruit quality, adaptation to the environmental conditions of the site, acceptance in the market and post-harvest life (Bianchi et al., 2016; Monge-Pérez & Loría-Coto, 2017).

One of the regions that produces the most melon in Mexico is the Comarca Lagunera, where in the months of June, July and August there is an excess of supply resulting in low prices (Ramírez-Barraza, García-Salazar, & Mora-Flores, 2015). In Mexico, the Cantaloupe-type melon, also known as Chinese melon, which is rough or reticulated, accounts for 70 % of all melon production, followed by the Honeydew melon, also known as Honeymelon, with 28 %; other types of melon make up the remaining 2 % (Espinoza-Arellano, Orona-Castillo, & Cano-Ríos, 2002). Each country has its own cultural traditions in terms of preferred tastes; consequently, while Harper / Cantaloupe melons account for 85 % of all melon exports to the United States and Honeydew melons only 15 %, Europe’s imports are substantially different: 58 % Honeydew melons, 39 % Harper melons and 3 % Galia melons (Monge-Pérez, 2014).

The supply situation in the melon export market requires evaluating recently created cultivars, including those of interest to new markets. The Korean, Japanese and Singaporean markets have great importance, with the melon as either a fresh or frozen product (Laínez & Krarup, 2008). Therefore, it is important for the producer to choose a good genotype with quality characteristics and a long post-harvest life that can reach distant markets, which can yield good profits (Espinoza-Arellano, Lozada-Cota, & Leyva-Nájera, 2011; Espinoza-Arellano et al., 2009).

The Cruiser hybrid is supplied to both domestic and export markets and is one of the main hybrids planted in the Comarca Lagunera (Chew et al., 2010); however, this hybrid has an intermediate post-harvest life, meaning it is unable to reach distant markets in tradable conditions (Suslow et al., 2002). The objective of this research was to identify new Harper-type melon hybrids that have a longer post-harvest life that enables producers to access the aformentioned markets.

Materials and methods

The experiment was carried out in the José María Morelos ejido’s El Progreso field located at km 20 of the toll-free Torreón-Saltillo (25° 23’ and 25° 48’ NL and 103° 23’ and 103° 03’ WL, at an elevation of between 1,100 and 1,700 masl), in the municipality of Matamoros, Coahuila, Mexico, within the Comarca Lagunera, during the spring-summer agricultural cycle of 2014.

Four Harper-type melon hybrids (Alaniz Gold, Queen RZ, King RZ and Cruiser) were evaluated for which a randomized block design with three replications was used. Experimental plots of 2 x 8 m were formed to carry out the test. Planting started on March 16, 2014, with a density of 20,000 plants per hectare. All the preparatory work was carried out prior to sowing: fallowing, tracing, leveling, and tracing of beds; the latter were established in the month of February with a distance of 2 m in width, in a mulching system with strip irrigation. The drippers were 30 cm apart whereas the distance between plants was 25 cm. Pollination was carried out by means of beehives, placing 3 colonies per hectare four days after the onset of male flowering.

Since the soil analysis showed a low percentage of organic matter (1.2 %), the following fertilization plan was chosen: a base fertilization to the soil supplied before sowing of 52-75-0 (N-P-K), continuing with a total fertilization by fertigation of 120-100-200-40-40 (N-P-K-Ca-Mg) divided in all of the vegetative cycle starting from the first flowering. It was complemented with three foliar applications of organic fertilizer containing auxins, gibberellins, cytokinins, and micronutrients in chelated form.

Irrigation was carried out every third day at the beginning of the crop and increased to a daily basis at the appearance of the fruit. A pest and disease control system was implemented using products based on fipronil for soil pests, products based on lambda-cyhalothrin and thiamethoxam for the control of aphids, products with an active ingredient of carbendazim or methyl thiophanate for root diseases, and agrochemicals with the active ingredients difenoconazole and azoxystrobin for the control of molds.

The harvest was carried out on May 17, 2014, cutting 30 fruits of each hybrid. The fruits of the Harper-type hybrids do not detach themselves from the peduncle, so a knife was used to cut them. All fruits were harvested on the same date, according to the treatments.

The variables evaluated were fruit yield (t·ha-1), fruit weight (g), polar diameter (PD, cm), equatorial diameter (ED, cm), total soluble solids (TSS, °Brix) and post-harvest life (h), thickness of the epicarp and mesocarp (ET and MT [cm]), and cavity diameter (CD, cm) and firmness of the epicarp and mesocarp (EF and MF [N]), the latter were measured with a Fruit Hardness Tester (FHT 200, Extech® Instruments, USA) using a tip of 6 mm in diameter; the firmness in the epicarp was taken in the equatorial zone, whereas in the mesocarp the average of three measurements of the firmness of the middle part of the pulp was calculated. TSS was determined with a hand refractometer (Master 53α, Atago®, USA).

For post-harvest life, 15 fruits of each hybrid were sampled and stored at 18 °C without applying any previous treatment or washing. The weight of the fruits was taken every five days until completing 30 days. Every 10 days the weight loss percentage (WL) and the speed factor (SF) were determined for two fruits of each hybrid using the following equation:

WL=Average initial weight-Average final weightAverage initial weight×100

SF=Average initial weight-Average final weightStorage time

Statistical analysis

The data obtained were subjected to an analysis of variance, and in cases where significant differences were found a Fisher mean comparison was performed (P ≤ 0.05). In addition, a regression analysis was performed to assess fruit weight loss. All analyses were performed using the Statistical Analysis System ver. 9.0 (SAS, 2004).

Results

The coefficient of variation (CV) showed values below 23 %. The analysis of variance detected differences among the hybrids in fruit shape, shown by the significance (P ≤ 0.05) of the epicarp thickness (CV = 22.7 %), mesocarp thickness (CV = 7.7 %), and cavity diameter (CV = 8.2 %), as well as in quality, due to epicarp firmness (CV = 12.5 %), mesocarp firmness (CV = 15.9 %) and concentration of TSS (CV = 18.4 %). No significant difference among the hybrids in the variables fruit weight and yield were observed (Table 1).

Table 1 Mean comparisons of fruit weight and yield in Cucumis melo L. hybrids. 

Cruiser F1 Alaniz Gold Queen RZ King RZ LSD1
Fruit weight (kg) 1.762 abz 1.641 b 1.924 a 1.935 a NS
Yield (t·ha-1) 45.291 a 33.894 a 41.303 a 43.532 a NS

1LSD = least significant difference; NS = not significant. zMeans with different letters within each line do not differ statistically (Fisher, P ≤ 0.05).

Parameters of fruit shape and quality

It is necessary to specify that in the CD and ET variables, the smaller the cavity and thickness the better, contrary to the MT. Alaniz Gold hybrid showed a higher MF value than EF one (Table 2). This may be due to the fruits being harvested when they were not yet ripe enough, resulting in a low TSS value.

Table 2 Mean comparisons of the physical parameters evaluated in hybrids of Cucumis melo L at the time of harvest. 

Cruiser F1 Alaniz Gold Queen RZ King RZ LSD
PD1 (cm) 15.99 az 14.06 b 16.55 a 16.01 a NS
ED (cm) 14.69 a 14.98 a 14.92 a 15.02 a NS
ET (cm) 0.54 c 0.88 a 0.56 bc 0.65 b 0.09
MT (cm) 3.71 ab 3.40 c 3.81 a 3.63 b 0.15
CD (cm) 6.03 b 6.62 a 6.33 ab 6.68 a 0.46
EF (N) 44.46 c 46.95 c 62.52 a 55.36 b 4.74
MF (N) 38.67 c 64.30 a 49.62 b 28.66 c 7.88
TSS (°Brix) 6.54 b 6.80 b 13.62 a 13.42 a 1.43

1PD = polar diameter; ED = equatorial diameter; ET = epicarp thickness; MT = mesocarp thickness; CD = cavity diameter; EF = epicarp firmness; MF = mesocarp firmness; TSS = total soluble solids; LSD = least significant difference; NS = not significant. zMeans with different letters within each line do not differ statistically (Fisher, P ≤ 0.05).

Figure 1 shows the performance of the hybrids over 30 days. The hybrid with the highest weight loss was Cruiser F1, without reaching the end of the experiment. The fruits of this hybrid were only evaluated until day 20 because the commercial maturity of the fruits had already passed.

Figure 1 Fruit weight loss of the four Cucumis melo L. hybrids over time. 

The regression equations showed that the Queen RZ and King RZ hybrids have similar weights, as well as Alaniz Gold and Cruiser F1; however, the fruit weight loss in Cruiser F1 was higher (1.088 g·h-1) compared to the others, and less with Queen RZ with (0.547 g·h-1). The initial weight of the King RZ’s fruit (2,086 g) was the highest, and its final weight at 30 days was similar to that of Queen RZ (1,614 g). The initial weight of Alaniz Gold's fruit (1,785 g) was the lowest of the hybrids; however, its final weight was more than that of Cruiser F1 (1,488 and 1,371 g, respectively) 20 days after harvest.

Tables 3, 4 and 5 show the means of the fruit shape parameters, firmness and concentration of TSS evaluated at 10, 20 and 30 days post-harvest, respectively. The quality of the fruits of the Cruiser F1 hybrid decreased considerably after 20 days; therefore, only results of this hybrid until this date are shown (Table 4).

Table 3 Mean comparisons of physical parameters evaluated at 10 days post-harvest in hybrids of Cucumis melo L. 

Cruiser F1 Alaniz Gold Queen RZ King RZ LSD
PD1 (cm) 19.50 az 14.50 b 16.25 b 16.50 b 2.64
ED (cm) 14.15 a 15.65 a 14.60 a 15.20 a NS
ET (cm) 0.80 a 0.70 ab 0.45 c 0.50 bc 0.22
MT (cm) 3.00 a 3.60 a 3.50 a 3.75 a NS
CD (cm) 7.15 a 7.15 a 6.50 a 7.15 a NS
EF (N) 49.31 b 49.75 b 61.81 a 52.42 ab 9.76
MF (N) 42.63 b 67.11 a 44.90 b 21.32 c 12.70
TSS (°Brix) 6.25 b 10.25 a 12.90 a 12.10 a 2.67

1PD = polar diameter; ED = equatorial diameter; ET = epicarp thickness; MT = mesocarp thickness; CD = cavity diameter; EF = epicarp firmness; MF = mesocarp firmness; TSS = total soluble solids; LSD = least significant difference; NS = not significant. zMeans with different letters within each line do not differ statistically (Fisher, P ≤ 0.05).

Table 4 Mean comparisons of physical parameters evaluated at 20 days post-harvest in hybrids of Cucumis melo L. 

Cruiser F1 Alaniz Gold Queen RZ King RZ LSD
PD1 (cm) 16.93 az 15.45 a 16.15 a 16.65 a NS
ED (cm) 13.75 b 15.80 a 15.40 a 15.60 a 1.58
ET (cm) 0.39 a 0.55 a 0.35 a 0.30 a NS
MT (cm) 2.79 b 3.40 ab 4.00 a 3.75 a 0.63
CD (cm) 6.46 a 6.50 a 6.25 a 6.75 a NS
EF (N) 28.52 b 45.12 a 53.71 a 57.32 a 16.37
MF (N) 14.69 b 47.88 a 23.23 b 19.58 b 18.77
TSS (°Brix) 7.23 b 8.80 b 11.65 a 12.35 a 1.71

1PD = polar diameter; ED = equatorial diameter; ET = epicarp thickness; MT = mesocarp thickness; CD = cavity diameter; EF = epicarp firmness; MF = mesocarp firmness; TSS = total soluble solids; LSD = least significant difference; NS = not significant. zMeans with different letters within each line do not differ statistically (Fisher, P ≤ 0.05).

Table 5 Mean comparisons of physical parameters evaluated at 30 days post-harvest in hybrids of Cucumis melo L. 

Cruiser F1 Alaniz Gold Queen RZ King RZ LSD
PD1 (cm) - 14.19 bz 15.74 a 16.03 a 0.66
ED (cm) - 14.20 a 14.54 a 14.65 a NS
ET (cm) - 0.44 a 0.35 a 0.26 a NS
MT (cm) - 3.39 b 3.70 a 3.66 a 0.22
CD (cm) - 6.39 a 5.95 a 6.37 a NS
EF (N) - 51.66 a 50.95 a 48.37 a NS
MF (N) - 39.92 a 20.65 b 21.09 b 12.35
TSS (°Brix) - 7.39 b 10.25 a 10.44 a 1.05

1PD = polar diameter; ED = equatorial diameter; ET = epicarp thickness; MT = mesocarp thickness, CD = cavity diameter; EF = epicarp firmness; MF = mesocarp firmness; TSS= total soluble solids; LSD = least significant difference; NS = not significant. zMeans with different letters within each line do not differ statistically (Fisher, P ≤ 0.05).

As for TSS at 10, 20 and 30 days after harvest, it is noticeable that as days go by the value of °Brix decreases, in the case of the Queen RZ and King RZ hybrids, this value reaches approximately 10 °Brix, while Alaniz Gold goes down to 7.4 °Brix. This performance was observed in most of the variables evaluated.

Table 6 shows that the Cruiser F1 hybrid has the highest weight loss speed, which was to be expected due to its short shelf life, while the rest of the hybrids had a similar speed factor. On the other hand, the Queen RZ hybrid showed the lowest percentage of weight loss in the three dates evaluated, followed by King RZ and Alaniz Gold.

Table 6 Fruit weight loss speed factors in fruits at 10, 20 and 30 days post-harvest in Cucumis melo L. hybrids. 

IW1 (g) WL (%) W (g) SF (g·h-1)
10 days post-harvest (240 h)
Cruiser F1 2,044 9.78 200 0.83
Alaniz Gold 1,859 7.21 134 0.56
Queen RZ 1,995 6.27 125 0.52
King RZ 2,165 7.53 163 0.68
20 days post-harvest (480 h)
Cruiser F1 1,859 26.14 486 1.01
Alaniz Gold 2,091 12.67 265 0.55
Queen RZ 2,175 11.08 241 0.50
King RZ 2,282 12.58 287 0.60
30 days post-harvest (720 h)
Cruiser F1 - - - -
Alaniz Gold 1,707 23.73 405 0.56
Queen RZ 1,994 20.66 412 0.57
King RZ 2,035 21.43 436 0.61

1IW = initial weight; WL = percentage of fruit weight loss; W = fruit weight loss; SF = weight loss speed factor.

Discussion

Fruit weight and fruit yield did not show significant differences among hybrids. The largest production was presented by the hybrid Cruiser F1 (45.29 t·ha-1), followed by King RZ (43.53 t·ha-1), Queen RZ (41.30 t·ha-1) and finally Alaniz Gold (33.89 t·ha-1). Most of the yields obtained are higher than those observed in a study conducted at the University of Costa Rica where 59 genotypes were evaluated, 18 of them Harper type, and obtained an average of 0.584 kg per fruit with a yield of 34.34 t·ha-1 (Monge-Pérez & Loría-Coto, 2017). On the other hand, the results compiled by Monge-Pérez (2016) indicate a yield of 41.30 t·ha-1 with the hybrid Harper JMX-1001, with a harvest start of 62 days after planting; this value is equal to the one reported with Queen RZ.

In the first evaluation of the 120 fruits, it was found that the hybrid that has the best fruit shape characteristics is Queen RZ, with polar and equatorial diameters of 16.55 and 14.95 cm, respectively. In addition it also had the thickest mesocarp (3.81 cm), small cavities (6.33 cm) and not very thick epicarps (0.56 cm), good firmness in the epicarp and mesocarp (62.52 and 49.62 N, respectively), and the highest concentration of TSS (13.62 °Brix). In addition, this hybrid reached 30 days of post-harvest life at 18 °C. Nunes et al. (2004) evaluated different genotypes of Red Fresh in Brazil and obtained a yield of 32.54 t·ha-1 with an average weight of 1.254 kg in fruits with a mesocarp thickness of 3.18 cm, cavity diameter of 6.55 cm, mesocarp firmness of 42.80 N and TSS of 10.89 °Brix; these results are slightly lower than those obtained in this experiment

Laínez and Krarup (2008) evaluating the Glamor cultivar in Chile, and equatorial and polar diameters of 13 and 13.5, respectively, were obtained, with a 4.8 cm cavity diameter, 12.4 °Brix TSS and 18.7 N mesocarp firmness (Laínez & Krarup, 2008). The genotypes evaluated by Monge-Pérez and Loría-Coto (2017) showed 14.54 °Brix and 19.12 N mesocarp firmness. In an evaluation of the genotype Bonus n° 2, Rizzo and Braz (2001) obtained average fruit weight of 693.25 g with polar and equatorial diameters of 10.20 and 10.48 cm respectively, with mesocarp and epicarp thicknesses of 2.80 and 0.209 cm, respectively, and 13.15 °Brix TSS. These results are also below those obtained in this experiment.

The hybrid Alaniz Gold did not present favorable results in the variables studied, possibly because its fruits were harvested when they were not yet at their point of maturation. In the evaluation of hybrids at 10 days after harvest, it is shown that Queen RZ continues to maintain quality characteristics. In general, the four hybrids showed a decrease in TSS and in most of the variables evaluated. In the evaluation after 20 days, the Queen RZ hybrid remains outstanding in terms of TSS (11.65 °Brix); however,it was surpassed by the King RZ hybrid, which obtained 12.35 °Brix. In the last evaluation carried out at 30 days, only Alaniz Gold, Queen RZ and King RZ fruits were available. The last two were the ones that obtained the most favorable values, reaching 10.25 and 10.44 °Brix, respectively.

It can be affirmed that as days go by, the amount of °Brix decreases, with the Queen RZ and King RZ hybrids having around 10 °Brix, while Alaniz Gold drops up to 7.4 °Brix. The above, according to the literature, indicates that the hybrids Queen RZ and King RZ can be commercialized after 30 days of storage at 18 °C; this is due to the fact that they present TSS values in the range considered as marketable (between 9 and 12 °Brix) (Vargas et al., 2008).

Mesocarp firmness in the Queen RZ hybrid was 44.90 N at 10 days after harvest, decreasing to 20.65 N at 30 days. Laínez and Krarup (2008), in evaluating fruits of Oriental-type cantaloupes stored at 0 and 10 °C for 21 days, found that the fruits of the cultivar Glamour underwent a reduction in quality with a firmness of 41.8 and 16 N and TSS of 11.4 and 10.5 °Brix, at 0 and 10 °C, respectively. Gomes, Menezes, Nunes, Costa, and Souza (2001) analyzed two cutting dates (when the fruit is not ripe [II] and when the fruit is fully ripe [IV]) in Cantaloupe-type fruits stored for 25 days at 20 °C and obtained firmness values of 30.07 and 17.87 N for II and IV, respectively, at the beginning of storage, and 5.32 and 3.50 N at the end of the storage period.

Brackmann et al. (2006) evaluated the hybrid Torreon grown hydroponically and stored in polyethylene packages for 25 days at 2 °C, and observed that the mesocarp firmness was initially 17.4 ± 2.4 N and ended at 16.9 N (Brackmann et al., 2006).

The Queen RZ hybrid stands out among the four hybrids by obtaining the least fruit weight loss with an average speed factor of 0.55 g·h-1. The fruit weight loss percentages incurred by the Queen RZ hybrid fruits were 6.27, 11.10 and 19.80 % at 10, 20 and 30 days respectively with a speed factor of 0.52, 0.50 and 0.57 g·h-1 respectively. These values are lower than those reported by Cano-Ríos, Theran-Kruger, and Esparza-Martínez (2004) in a study conducted in the Comarca Lagunera with cross-linked hybrids, because fruit weight loss percentages of 16.80 and 13.60 % were obtained for Hy Mark and Cruiser, respectively, with a speed factor of 1.55 and 1.24 g·h-1, at 6 storage days.

Conclusions

Fruit shape parameters (equatorial and polar diameter) in the Harper-type melon hybrids were not significantly modified by the fruit weight loss caused by the passage of time; however, the quality of the fruit is diminished by the effect of storage (30 days, 18 °C), since the fruit weight loss causes reduced firmness and TSS. According to the results obtained, we can affirm that the Queen RZ and King RZ Harper-type hybrids were marketable after 30 days post-harvest, sufficient to reach distant markets. These hybrids also had better fruit shape parameters, greater firmness and a higher concentration of TSS compared to the control of the region (Cruiser F1).

Harper-type melon hybrids represent an opportunity for melon producers to venture not only into distant markets, but to introduce this type of melon in the national market and change the planting and marketing paradigm.

Acknowledgments

We thank MsC. Victor Manuel Valdéz Rodríguez for his collaboration in the field crop for the evaluation of his hybrids, thereby making it possible to carry out this investigation.

References

Alanís-Guzman, M. G., García-Díaz, C. L., Reyes-Avalos, M. C., & Meza-Velázquez, J. A. (2013). Application of hydro-cooling and an HPMC paraffin coat to increase the shelf life of Cantaloupe melon. Universidad y Ciencia. Trópico Húmedo, 29(2), 179-190. Retrieved from http://www.scielo.org.mx/scielo.php?script=sci_arttext&pid=S0186-29792013000200007Links ]

Alves-Ferreira, H., Araújo-do Nascimento, C. W., Datnoff, L. E., de Sousa-Nunes, G. H., Preston, W., Barbosa-de Souza, E., & Ramos-Mariano, R. L. (2015). Effects of silicon on resistance to bacterial fruit blotch and growth of melon. Crop Protection, 78(1), 277-283. doi: 10.1016/j.cropro.2015.09.025 [ Links ]

Ayala-Aponte, A., & Cadena, M. I. (2014). The influence of osmotic pretreatments on melon (Cucumis melo L.) quality during frozen storage. DYNA, 81(186), 81-86. doi: 10.15446/dyna.v81n186.38700 [ Links ]

Bautista-Baños, S., Hernández-Lauzardo, A. N., Velázquez-del Valle, M. G., Bosquez-Molina, E., & Sánchez-Domínguez, D. (2005). Quitosano: Una alternativa natural para reducir microorganismos postcosecha y mantener la vida de anaquel de productos hortícolas. Revista Iberoamericana de Tecnología Postcosecha, 7(1), 1-6. Retrieved from http://www.redalyc.org/articulo.oa?id=81370102Links ]

Bianchi, T., Guerrero, L., Gratacós-Cubarsí, M., Claret, A., Argyris, J., Garcia-Mas, J., & Hortós, M. (2016). Textural properties of different melon (Cucumis melo L.) fruit types: Sensory and physical-chemical evaluation. Scientia Horticulturae, 201(1), 46-56. doi: 10.1016/j.scienta.2016.01.028 [ Links ]

Brackmann, A., Eisermann, A. C., Hettwer-Giehl, R. F., Binotto-Fagan, E., Petter-Medeiros, S. L., & Steffens, C. A. (2006). Quality of Torreon hybrid melon fruits (Cucumis melo L. var. cantalupensis Naud.) grown in hydroponic system and stored in polyethylene packaging. Ciência Rural, Santa Maria, 36(4), 1143-1149. doi: 10.1590/S0103-84782006000400016 [ Links ]

Cano-Ríos, P., Theran-Kruger, K. E., & Esparza-Martínez, J. H. (2004). Calidad de fruta de híbridos de melon reticulado (Cucumis melo L.) bajo condiciones de la Comarca Lagunera. Revista Chapingo Serie Zonas Áridas, 3, 123-130. Retrieved from https://chapingo.mx/revistas/revistas/articulos/doc/rchszaIII917.pdfLinks ]

Chassagne-Berces, S., Poirier, C., Devaux, M. F., Fonseca, F., Lahaye, M., Pigorini, G., Girault, C., Marin, M., & Guillon, F. (2009). Changes in texture, cellular structure and cell wall composition in apple tissue as a result of freezing. Food Research International, 42(7), 788-797. doi: 10.1016/j.foodres.2009.03.001 [ Links ]

Chew, M. Y. I., Reyes, J. I., Espinoza, A. J. J., Ramírez, D. M., Pastor, L. F. J., Figueroa, V. U., & Cano, R. P. (2010). Guía para la producción de melon en la Región Lagunera. México: Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias. [ Links ]

de Oliveira, M. J., Laranjeira, D., Saraiva-Camara, M. P., Ferraz-Laranjeira, F., Armengol, J., & Michereff, S. J. (2014). Effects of wounding, humidity, temperature, and inoculum concentrations on the severity of corky dry rot caused by Fusarium semitectum in melon fruits. Acta Scientiarum Agronomy, 36(3), 281-289. doi: 10.4025/actasciagron.v36i3.17656 [ Links ]

Espinoza-Arellano, J. J., Lozada-Cota, M., & Leyva-Nájera, S. (2011). Posibilidades y restricciones para la exportación de melón cantaloupe producido en el municipio de Mapimí, Dgo., México al mercado de los Estados Unidos. Revista Mexicana de Agronegocios, 28(15), 593-604. Retrieved from http://www.redalyc.org/articulo.oa?id=14115904013Links ]

Espinoza-Arellano, J. J., Lozada-Cota, M., Leyva-Nájera, S., Cano-Ríos, P., Arreola-Avila, J. G., & Ruiz-Torres, J. (2009). Ventanas de mercado en los Estados Unidos de América para exportacion de melón cantaloupe procedente de la Comarca Lagunera México. Revista Chapingo Serie Zonas Áridas , 8(1), 149-158. Retrieved from https://chapingo.mx/revistas/revistas/articulos/doc/rchszaVIII1062.pdfLinks ]

Espinoza-Arellano, J. J., Orona-Castillo, I., & Cano-Ríos, P. (2002). El melón: Tecnologías de producción y comercialización. México: Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias . [ Links ]

Flores, G. N., Flores, R. A., Fabela, Z. A., Aguilera, T. D., Flores, M. A., & Alfaro, H. L. (2013). Curvas de absorción de nutrimentos en melón en áreas potenciales de la Comarca Lagunera. México: Sociedad Mexicana de Ciencia y Tecnología Agropecuaria, A.C. e Instituto Tecnológico de Roque. [ Links ]

García-Robles, J. M., Quintero-Ibarra, M., Mercado-Ruiz, J. N., & Báez-Sañudo, R. (2016). Conservación postcosecha de melón cantaloupe mediante el uso de cera comestible y 1-metilciclopropeno. Revista Iberoamericana de Tecnología Postcosecha , 17(1), 79-85. Retrieved from http://www.redalyc.org/pdf/813/81346341011.pdfLinks ]

Gomes, J., Menezes, J. B., Nunes, G. H. S., Costa, F. B., & Souza, P. A. (2001). Qualidade pós-colheita de melão tipo cantaloupe, colhido em dois estádios de maturação. Horticultura Brasileira, 19(3), 356-360. doi: 10.1590/S0102-05362001000300014 [ Links ]

Laínez, D., & Krarup, C. (2008). Caracterización en pre y poscosecha de dos cultivares de melón reticulado del tipo Oriental (Cucumis melo Grupo Cantalupensis). Ciencia e Investigacón Agraria, 35(1), 59-66. doi: 10.4067/S0718-16202008000100006 [ Links ]

Li, X. W., Jin, P., Wang, J., Zhu, X., Yang, H. Y., & Zheng, Y. H. (2011). 1-methylcyclopropene delays postharvest ripening and reduces decay in hami melon. Journal of Food Quality, 34(1), 119-125. doi: 10.1111/j.1745-4557.2011.00377.x [ Links ]

Lima-de Deus, J. A., Soares, I., Lima-Neves, J. C., Francismar-de Medeiros, J., & Rodrigues-de Miranda, F. (2015). Fertilizer recommendation system for melon based on nutritional balance. Revista Brasileira de Ciência do Solo, 39(2), 498-511. doi: 10.1590/01000683rbcs20140172 [ Links ]

Monge-Pérez, J. E. (2014). Costa Rican melon (Cucumis melo) production and exports. Tecnología en Marcha, 27(1), 93-103. Retrieved from https://www.researchgate.net/publication/317490710_Costa_Rican_melon_Cucumis_melo_production_and_exportsLinks ]

Monge-Pérez, J. E. (2016). Evaluación de 70 genotipos de melón (Cucumis melo L.) cultivados bajo invernadero en Costa Rica. InterSedes, 17(1), 1-41. doi: 10.15517/isucr.v17i36.26944 [ Links ]

Monge-Pérez, J. E., & Loría-Coto, M. (2017). Producción de melón en invernadero: comparación agronómica entre tipos de melón. Revista Posgrado y Sociedad, 15(2), 79-100. doi: 10.22458/rpys.v15i2.1966 [ Links ]

Nunes, G. H., Santos, J. J., Andrade, F. V., Bezerra-Neto, F., Almeida, A. H., & Medeiros, D. C. (2004). Aspectos produtivos e de qualidade de híbridos de melão cultivados no agropolo Mossoró-Assu. Horticultura Brasileira , 22(4), 744-747. doi: 10.1590/S0102-05362004000400015 [ Links ]

Ramírez-Barraza, B. A., García-Salazar, J. A., & Mora-Flores, J. S. (2015). Producción de melón y sandía en la Comarca Lagunera: un estudio de planeación para reducir la volatilidad de precios. Ciencia Naturales y Agropecuarias, 22(1), 45-53. Retrieved from https://dialnet.unirioja.es/servlet/articulo?codigo=5000341Links ]

Rizzo, A. A., & Braz, L. T. (2001). Características de cultivares de melão rendilhado cultivadas em casa de vegetação. Horticultura Brasileira , 19(3), 370-373. doi: 10.1590/S0102-05362001000300017 [ Links ]

Román-Moreno, L. F., & Gutiérrez-Coronado, M. A. (1998). Evaluacion de acidos carboxilicos y nitrato de calcio para incrementar calidad, cantidad y vida de anaquel en tres tipos de melon. Terra Latinoamericana, 16(1), 49-54. doi: https://chapingo.mx/terra/contenido/16/1/art49-54.pdfLinks ]

Statistical Analysis System (SAS Institute). (2004). SAS User’s Guide version 9.0. Cary, N.C., USA: Author. [ Links ]

Suslow, T., Cantwell, M., & Mitchell, J. (2002). Melón Cantaloupe (Chino o de Red): Recomendaciones para mantener la calidad postcosecha. California: University of California. Retrieved from http://postharvest.ucdavis.edu/Commodity_Resources/Fact_Sheets/Datastores/Fruit_Spanish/?uid=38&ds=802 Links ]

Vargas, P. F., Castoldi, R., de Oliveira-Charlo, H. C., & Trevizan-Braz, L. (2008). Qualidade de melão rendilhado (Cucumis melo L.) em função do sistema de cultivo. Ciência e Agrotecnologia, 32(1), 137-142. doi: 10.1590/S1413-70542008000100020 [ Links ]

Received: May 21, 2019; Accepted: August 23, 2019

*Corresponding author: jlreyes54@gmail.com, tel. 871 786 20 56.

Creative Commons License This is an open-access article distributed under the terms of the Creative Commons Attribution License