SciELO - Scientific Electronic Library Online

 
vol.23 número2‘Deja Vu’ un nuevo cultivar de alcatraz (Zantedeschia aethiopica)Fechas de cultivo de híbridos de Allium cepa L. en Gurupi, Tocantins, Brasil índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Revista Chapingo. Serie horticultura

versión On-line ISSN 2007-4034versión impresa ISSN 1027-152X

Rev. Chapingo Ser.Hortic vol.23 no.2 Chapingo may./ago. 2017

https://doi.org/10.5154/r.rchsh.2016.11.030 

Review article

Chitosan: a versatile antimicrobial polysaccharide for fruit and vegetables in postharvest - a review

Silvia Bautista-Baños1  * 

Rosa Isela Ventura-Aguilar1 

Zormy Correa-Pacheco1 

María Luisa Corona-Rangel1 

1Instituto Politécnico Nacional, Centro de Desarrollo de Productos Bióticos. Carretera Yautepec-Jojutla km 6. CEPROBI 8, San Isidro Yautepec, Morelos, C. P. 62730. MÉXICO.


Abstract:

Chitosan has been proven to control numerous postharvest diseases in various horticultural commodities; in addition, its action mechanisms are well documented. To date, in a multifaceted approach, the integration of chitosan with other alternatives, including, among others, physical and chemical options to reduce the incidence of diseases during storage, has been proven in various fruit and vegetables. As of today, control of postharvest pathogenic microorganisms by applying chitosan nanomaterials remains an emerging technology. Despite that, overall results indicate that the integration of chitosan with other control methods extend the storage life of numerous important horticultural commodities largely by reducing microorganism incidence. The objective of this article was to gather, analyze and summarize relevant published information about the inclusion of chitosan with other preservation methods including heat, UV irradiation, modified atmosphere packaging (MAP), plant derivatives, inorganic acids, salts, antagonistic microorganisms, fungicides and other coatings. Recent advances in the evaluation of chitosan-based nanomaterials were also reviewed. In spite of its demonstrated positive effects, assays about its application to large-scale tests and its integration into postharvest commercial practices are still lacking.

Keywords: microorganisms; postharvest; food preservation; synergistic effects; nanomaterials

Resumen:

Está documentado que el quitosano controla numerosas enfermedades poscosecha en diversos productos hortícolas. Hasta la fecha, y considerando un enfoque multifacético, se ha evaluado la integración del quitosano con otras alternativas (físicas y químicas, entre otras) para reducir la incidencia de enfermedades durante el almacenamiento de frutas y hortalizas. Actualmente, el control de microorganismos patógenos en poscosecha con nanomateriales de quitosano sigue siendo una tecnología emergente. En general, los resultados indican que la combinación de quitosano con otros métodos de control prolonga la vida de almacenamiento de diversos productos hortícolas importantes; en gran parte, debido a la disminución de la incidencia de microorganismos. El objetivo de este artículo fue recopilar, analizar y resumir información relevante acerca del uso de quitosano con otros métodos de conservación (incluyendo calor, radiación ultra violeta [UV], envasado en atmósfera modificada [MAP], derivados vegetales, ácidos inorgánicos, sales, microorganismos antagonistas, fungicidas y otros recubrimientos) sobre su actividad antimicrobiana en frutas y hortalizas. Adicionalmente, se revisaron avances recientes sobre nanomateriales basados en quitosano. A pesar de que se han demostrados los efectos positivos del quitosano, aún falta realizar evaluaciones a gran escala para su integración en prácticas poscosecha.

Palabras clave: microorganismos; poscosecha; conservación de alimentos; efectos sinérgicos; nanomateriales.

Introduction

Fruit and vegetables are living organisms that after harvest obtain their energy through the respiration process. This postharvest metabolism causes the commodity to ripen and eventually senescence. The positive characteristics that make fruit suitable for consumption also make them susceptible to disease. During this ripening period, fruit is prone to develop rots caused by microorganisms that hasten commodity ripening, damage their internal and external appearance, cause off-odors, produce mycotoxins and contaminate adjacent commodities. Although the economic losses due to fungal infection in fruit and vegetables during the postharvest chain are variable and not well documented, they usually reach anywhere from 30 to 50 % and on some occasions rots can lead to total loss of the produce. Both fungi and bacteria cause rots; however, in general, fungal infections are reported to have a greater ability to infect a broader range of hosts throughout the whole postharvest chain (Bautista-Baños, Romanazzi, & Jiménez-Aparicio, 2016).

To control these fungi, commercially-viable alternatives or possible future alternatives to the use of synthetic fungicides that either work in combination or alone have been put forward. They include substances such as chitosan (the deacetylated form of chitin) that can be extracted from diverse marine organisms, insects and fungi. It is considered as a biodegradable and biocompatible material with no toxicity or side effects (Rodríguez-Pedroso et al., 2009). Presently, the use of chitosan has been technologically justified in sustainable agriculture programs since it raises no public health and safety concerns. In the fresh produce industry, the regulation EU 2014/563 included chitosan chloride as the first member of a basic substance list of plant protection products (planned with Regulation EU 2009/1107, Romanazzi & Feliziani, 2016).

Over the last decade, chitosan polysaccharide has taken on enormous importance in the control of postharvest pathogenic microorganisms. The presence of amino groups (-NH2) in its chemical structure gives chitosan unique and ideal food conservation and security properties which are exploited through the development of biodegradable edible coatings and films containing natural antimicrobials; it also has elicitor properties that enhance the natural defenses of fruit, vegetables and grains. Control of pathogenic microorganisms by applying nanotechnology is an emerging technology, which is taking on considerable importance. Currently, chitosan is also being considered for use in microdevices to be integrated into ‘intelligent’ and active packaging for extending fruit and vegetable shelf life (Bautista-Baños et al., 2016a).

The objective of this review article was to gather, analyze and summarize recent published information about the inclusion of chitosan with other preservation methods, including heat, UV irradiation, modified atmosphere packaging (MAP), plant derivatives, inorganic acids, salts, antagonistic microorganisms, fungicides and other coatings. Recent advances in the evaluation of chitosan-based nanoparticles were also reviewed.

Definition, sources and production of chitosan

Younes and Rinaudo (2015)define the term chitosan ‘as a family of polymers obtained after chitin deacetylation to varying degrees’. Lizardi-Mendoza, Argüelles-Monal, and Goycoolea-Valencia (2016) highlight that ‘a distinctive feature of the chemical structure of chitosan is the predominant presence of units with amino groups that can be ionized, becoming these groups cationic in acidic media, then promoting the chitosan dissolution and the polyelectrolyte behavior in solution’.

The acetylation degree, which reflects the balance between the two types of residues, differentiates chitin from chitosan. During deacetylation, acetyl groups are removed but also depolymerization reaction occurs, indicated by changes in molecular weight of chitosan (Younes & Rinaudo, 2015).

Chitosan can be found in the shells of marine crustaceans and is also an important component of the cell wall of certain fungi, particularly those belonging to the class Zygomycetes. Chitin can be converted into chitosan by enzymatic preparations or chemical processes. Chemical methods are used extensively for commercial purposes because of their low cost and suitability for mass production.

Antimicrobial properties of chitosan on postharvest fungi and overall mechanisms of action

A number of studies have confirmed the in vitro and in situ fungicidal effect of chitosan on various phytopathogenic fungal families including, among others, Mucoraceae, Pleosporaceae and Glomerellaceae. Commercially important fungi such as Alternaria alternata, Rhizopus stolonifer, Colletotrichum gloeosporioides, Fusarium oxysporum, Aspergillus flavus, and various species of Penicillium can also be seriously affected by the application of this polymer. On the subject, a vast literature reports that the antimicrobial activity of this compound on pathogenic microorganisms depends on different factors, including the strain, molecular weight, concentration, degree of deacetylation, type of chitosan, etc. (Bautista-Baños et al., 2006; Li, Feng, Yang, Wang, & Su, 2008). However, according to Hernández-Téllez, Plascencia-Jatomea, and Cortez-Rocha (2016), the degree of deacetylation is the factor with the most influence on the antimicrobial activity of chitosan, since the number of free amino groups in the chitosan molecule has been related to this activity.

Today, there is clear evidence about the mechanisms by which chitosan acts on phytopathogenic fungi and bacteria. As indicated by numerous studies, changes in cell permeability of the microorganisms are due to the interaction between the polycationic nature of the chitosan amino group and the electronegative charges in the outer surface of the fungal or bacteria membrane, with this electrostatic interaction depending on the composition of the plasma membrane, having higher affinity in sensitive membranes containing a polyunsaturated fatty acid composition (Dutta, Tripathi, Mehrotra, & Dutta, 2009; Palma-Guerrero et al., 2010).

In other studies, Peña, Sánchez, and Calahorra (2013) concluded that the ‘strong binding’ of chitosan to the membrane of the microorganisms leads to serious cellular imbalances of ion omeostasis K+ and Ca2+, causing the efflux of small molecules, including phosphates, nucleotides and substrate of enzyme reactions that eventually affect fungal respiration and fermentation.

Chitosan also interferes with the synthesis of mRNA and proteins through its penetration into the fungal nuclei (Henics & Wheatley, 1999) and acts as a chelating agent of metals and essential nutrients, inducing starvation of fungi and therefore growth inhibition (Ren, Liu, Li, Dong, & Guo, 2012). The interference in protein synthesis as a consequence of the membrane damage caused by charge interaction with chitosan is a mechanism that involves the ability of chitosan to pass through the cell membrane of a microorganism, and subsequently bind to DNA and interfere with protein synthesis. In addition, Gutiérrez-Martínez et al. (2016) in preliminary data of transcriptomic analysis of the chitosan-Colletotrichum-avocado ‘Hass’ interaction, reported significant changes in the gene expression of the pathogen and host.

In addition, Bautista-Baños, Barrera-Necha, Hernández-López, and Rodríguez-González (2016b) mention that the electrostatic interaction between chitosan and the microorganism is noted by dramatic alterations observed from the damaged structure of the cell wall and plasma membrane of the treated fungi. The integrity of organelles including vacuoles is seriously affected leading in some cases to cell lysis. During the host-pathogen interaction, formation of structural barriers by the host, mainly through inter- and intracellular synthesis of phenolic-lignin-like material that stops fungal invasion was also observed (Table 1). In these studies, fungal growth was not beyond the outer cortical area of the infected tissues, while damage on fungi was similar to those observed in in vitro studies.

Table 1 Morphological and cellular alterations of hyphae and conidia of various postharvest fungi after chitosan-treated. 

Fungi Fungal structure Structural changes 1 Morphological changes 2 Cellular changes 3 References
Alternaria alternata Hyphae and conidia - Swelling, abnormal shape and disorganized mycelia. Loosened, broken and uneven cell walls, intense and extended vacuolization, formation of fibrillar material, leakage of cytoplasm, cellular lysis. Sánchez-Domínguez et al. (2011); de Oliveira, el Gueddari, Moershbacher, and Franco (2012a); López-Mora et al. (2013)
Aspergillus niger Conidia - Swelling, aggregates. Alterations in outer cell and nucleus membrane. Plascencia-Jatomea, Viniegra, Olayo, Castillo-Ortega, and Shirai (2003); Liu, Tian, Meng, and Xu, (2008)
Botrytis cinerea Hyphae Swelling, abnormal shapes and disorganized mycelia. Vesicle formation, excessive branching. Cells devoid of cytoplasm. de Oliveira, de Melo, and Teixera (2012b)
Colletotrichum gloeosporioides Hyphae Shrunken, abnormal shapes, deformed and collapsed. - - Jung et al. (2011)
Penicillium expansum Hyphae - Swelling, abnormal shape and disorganized mycelia. - de Oliveira et al. (2012b)
Rhizopus stolonifer Hyphae Excessive branching. Distorted mycelia. Intense dehydration, loosened, irregular and altered cell wall. Ramos-García et al. (2012)

-not reported; 1Optical microscopy; 2Scanning electron microscopy; 3Transmission electron microscopy

About the elicitation properties of chitosan, several studies have reported that chitosan can induce a series of enzyme activities and the production of various compounds on fruit and vegetables that are correlated with plant defense reactions to pathogen attack. On this, among others, Berúmen-Varela, Coronado-Partida, Ochoa-Jiménez, Chacón-López, and Gutiérrez-Martínez (2015), Romanazzi and Feliziani (2016)and Sivakumar, Malick, Korsten, and Thompson (2016) reported that pre- and postharvest applications of chitosan increases phenyl ammonia lyase, chitinase (endo and exochitinases) and β-1,3-glucanase activities in numerous treated tropical and temperate fruit including various cvs. of tomatoes, litchi, grapes, pears, peaches and mangoes. They also found that chitosan application induces fruit disease resistance during fungal infection through regulation of reactive oxygen species (ROS) levels, antioxidant enzymes, and the ascorbate-glutathione cycle.

Chitosan coatings to reduce postharvest decay in horticultural commodities

Chitosan forms a semipermeable film that regulates gas exchange and reduces transpiration loss, thus slowing down fruit ripening. Generally, respiration rate and hence water loss is reduced. In addition, as mentioned previously, chitosan coatings have the ability to retard or avoid the development of numerous fungi during storage of various horticultural commodities. Numerous fruit including, among others, red-mombin, avocado, papaya and dragon fruit have benefited from chitosan application.

The average efficacy of chitosan applied alone for controlling major diseases (anthracnose, brown rot, rhizopus rot, gray mold and blue mold) ranged from 45 to 100 % (Figure 1, Table 2). In addition, studies mention that control may also be subject to the type of host-pathogen interaction, type of chitosan and concentration, and storage conditions. For example, studies about the control of two postharvest diseases with chitosan applications reported unsuccessful control of A. alternata on mango ‘Tommy Atkins’ (Bautista-Baños, Hernández-López, & Bosquez-Molina, 2004; López-Mora, Gutiérrez-Martínez, Bautista-Baños, Jiménez-García, & Zavaleta-Mancera, 2013), but complete control of C. gloeosporioides on this same cultivar (Berúmen-Varela et al., 2015). Additionally, chitosan coating with the highest molecular weight gave the best control of Botrytis cinerea during storage of tomatoes at 2 and 25 ºC (Badawy & Rabea, 2009). For most studies, the concentration of this polymer was a key factor in reducing postharvest disease and, as reported in in vitro studies, as the concentration increased the fungal infection decreased considerably.

Figure 1 Tropical fruit chitosan-treated and untreated. Treated: A1) avocado, B1) papaya and C1) red-mombin. Untreated: A2, B2 and C2. 

Table 2 Chitosan coating and its effect on postharvest rot development on some horticultural commodities. 

Commodity Chitosan Disease Level of control Reference
Dragon fruit Conventional chitosan 2 %. Modified chitosan 0.5 - 2.0 %. Anthracnose 80 % 93 % Ali et al. (2013)
Mango 1.0 and 1.5 % Anthracnose 100 % Berúmen-Varela et al. (2015)
Papaya 1.5 % Anthracnose 70 % Bautista-Baños, Hernández-López, Bosquez-Molina, and Wilson (2003)
Peaches 10 mg∙mL-1 Brown rot 60 % Li and Yu (2000)
Strawberries 2 % Rhizopus rot 45 % Park et al. (2005)
1 % Gray mold 70 % Romanazzi, Nigro, and Ippolito (2001)
Sweet cherries 1 % Gray mold 100 % Romanazzi, Nigro, and Ippolito (2001)
Brown rot 100 % Romanazzi, Nigro, and Ippolito (2001)
Tomato Molecular weight of 5.7 x 104 and 2.9 x 105 g∙mol-1 Gray mold 100 % Badawy and Rabea (2009)
0.5 and 1 % Blue mold 45 % Liu, Tian, Meng, and Xu (2007)
Table grapes 1 % Gray mold 70 % Romanazzi, Nigro, and Ippolito (2001)

1. Chitosan integrated with other alternative methods

A large amount of data indicates that chitosan may interact with other postharvest treatments, which in turn can improve the overall ability to prevent fungal decay of horticultural commodities during storage. The synergistic effects between chitosan formulations combined with physical means, including heat, UV irradiation exposures, modified atmosphere packaging (MAP) and hypobaric storage, are undeniable. In addition, chitosan integrated with natural products such as plant derivatives like plant extracts and essential oils, organic salts and acids, and antagonistic microorganisms, including yeast and bacteria, can be very effective for reducing postharvest fungal rots. Chitosan, synthetic fungicides and other polymers may also potentiate the synergistic effects (Bautista-Baños et al., 2006, 2016a).

a) Chitosan integrated with physical methods

Heat and UV irradiation technologies, MAP and hypobaric storage integrated with chitosan immersions have proven to be effective in controlling important postharvest pathogens.

Generally, heat treatments have been applied either as vapor heat or hot water in many fruit and vegetables to control superficial fungal diseases but when combined with chitosan formulations, reduction of rot development increased. For example, a combined treatment with 0.5 % chitosan and hot water at 50 ºC for 10 min resulted in a significantly higher reduction of overall decay on sweet cherry cv. “Napolyon” during storage compared to chitosan alone and control treatments (Chailoo & Asghari, 2011). Brown rot (Monilinia fructicola) development on peach cv Andros was reduced by 90 % with 1 % chitosan and a curing temperature of 20 ºC for 1 min (Casals et al., 2012), with the combination acting more as a preventive treatment than a curative one.

The technology of irradiation has been used for the preservation and production of foods that are free of pathogenic microorganisms and is therefore an important tool for the control of food-contaminating microorganisms. In addition, this technology combined with chitosan has been used to reduce fungal decay of stored horticultural products. In postharvest, application of UV-C combined with chitosan reduced fungal decay by B. cinerea on red table grapes of various cultivars (Freitas, López-Gálvez, Tudela, Gil, & Allende, 2015; Romanazzi, Gabler, & Smilanick, 2006), while for other tropical fruit such as banana, mango and papaya, development of anthracnose disease was considerably reduced with irradiated chitosan. Formulations of irradiated chitosan at 1 % with 5 kGy completely controlled C. musae in banana fruit, although the authors pointed out that chitosan alone at 1.5 % gave similar results (Jinasena, Pathirathna, Wickramarachchi, & Marasinghe, 2011). For mango fruit, disease symptoms were delayed for up to 5 weeks with an irradiated 1.5 % chitosan (100 and 200 kGy) coating, and infection was notably lower (25 %) compared to the control fruit (100 %) (Abbasi, Iqbal, Maqbool, & Hafiz, 2009). As for papaya fruit, Hewajulige, Sultanbawa, Wijeratnam, and Wijesundara (2009) reported that irradiated and non-irradiated chitosan solutions gave good control of anthracnose in both cvs. tested during five days storage.

MAP integrated with chitosan dip treatments provide an alternative decay control method. On this, Sivakumar et al. (2016) highlighted the positive effects of integrated MAP and chitosan on litchi fruit inoculated by several Penicillium species. Fruit decay incidence due to P. chrysogenum and P. glabrum was completely controlled with MAP and chitosan at 0.1 g∙L-1 and 1 g∙L-1 concentrations during low temperature storage for 21 days at 2 °C. On the other hand, combination treatment with MAP and chitosan at a 1 g∙L-1 concentration effectively controlled fruit decay incidence by P. crustosum and P. expansum under the same storage conditions.

Hypobaric storage involves the cold storage of a horticultural commodity under partial vacuum. On the subject, Romanazzi, Nigro, and Ippolito (2003)reported significant reduction of various postharvest rots of sweet cherries caused by Alternaria, Rhizopus and Penicillium in a two-year experiment. For the first year of trials, the best synergistic effect was obtained by 1 % chitosan combined with 0.50 atm. since the overall average percentage of sweet cherries affected by total rots ranged from 5.7 to 28 % and in the second year, it ranged from 3.6 to 15.5 % compared to 58 % for the untreated fruit.

b) integrated with natural products obtained from plants

Plant extracts and essential oils

Antimicrobial compounds can be present in different plant extracts obtained from leaves, flowers, seeds, roots and stems. About this, numerous reports have demonstrated their positive effect against a great diversity of phytopathogens such as bacteria and fungi, which in turn have been explored together with chitosan for synergistic effects against postharvest fungi (Table 3). On this, there are various studies confirming this effect; for example, on walnuts, overall yeast and molds were controlled with the highest concentration of chitosan incorporating green tea extracts (Sabaghi, Maghsoudlou, Khomeiri, & Ziaiifar, 2015), while for table grapes, during four weeks storage at 1 ºC, decay incidence was controlled above 90 % with a previous fruit immersion in 0.1 % grapefruit seed extracts and 1 % chitosan formulation (Xu et al., 2007). For blueberry fruit, decay was mildly controlled with chitosan and blueberry aqueous leaf extracts at any concentration given, and for inoculated and treated papaya, anthracnose disease was reduced by 50 % with 1.5 % chitosan integrated with papaya seed extracts (Bautista-Baños, Hernández-López, Bosquez-Molina, & Wilson, 2003).

Table 3 Effect of the combination of chitosan with plant extracts and essential oils on fungal incidence, during storage of some fruit and vegetables. 

Commodity Fungal microorganism Chitosan / plant derivative Average effect Reference
Chitosan + plant extracts
Walnut Molds and yeasts Chitosan + tea tree (10-5; 10-10 g∙L-1) Inhibition according to concentration. Sabaghi et al. (2015)
Blueberry ‘Redglobe’ Overall fungi 2 % chitosan + 4, 8, 12 % blueberry leaf Control not too significant. Yang et al. (2014)
Table grapes Botrytis cinerea 1.0 % chitosan + 0.1 % grapeseed Significant control up to 90 %. Xu et al. (2007)
Papaya ‘Maradol’ Colletotrichum gloeosporioides 1.5 % chitosan + papaya seed (2:10 w/v) Only fungistatic effect. Bautista-Baños, Hernández-López, Bosquez-Molina, and Wilson (2003)
Chitosan + essential oils
Tomato Rhizopus stolonifer Chitosan 1 % + beeswax 0.1 % + thyme and lime essential oils 0.1 % No positive effect on the control of R. stolonifera. Ramos-García et al. (2012)
Satsuma mandarin ‘Miyagawa’ Penicillium digitatum Chitosan 1 % + clove essential oil (0.5. 1.0, 2.0 mL∙L-1) No positive effect on the control of P. digitatum. Shao et al. (2015)
Grape ‘Muscatel’ Yeasts and molds Chitosan 1% + bergamot essential oil 2% The combination of chitosan + bergamot essential oil showed the highest antimicrobial activity. Sánchez-González et al. (2011)
Strawberry ‘Camarosa’ Botrytis cinerea Chitosan 1 % + lemon essential oil 3 % Delay in symptoms appearance and lower gray mold incidence. Perdones et al. (2012)
Avocado ‘Hass’ Colletotrichum gloeosporioides Chitosan 1 % + thyme essential oil 1 % Significant incidence and severity reduction of anthracnose. Bill et al. (2014)
Cucumber Phythophthora drehsleri Chitosan nanoparticles 0.3 % + cinnamon essential oil 1.6 g∙L-1 Severity and decay significantly lower than controls. Mohammadi et al. (2015)
Peach ‘Kakawa’ Monilinia fructicola Chitosan/bohemite alumina nanocomposites lidding films + thyme essential oil sachets 75 µl Severity and decay significantly lower than control. Cindi, Shittu, Sivakumar, and Bautista-Baños (2015)

Fungicidal activity by essential oil application has been demonstrated on a wide range of major postharvest fungi. Studies under controlled laboratory conditions have found a marked inhibition of fungal development by applying essential oils either by direct contact or in vapor phase. In relation to chitosan, numerous studies have also confirmed the synergistic effect between this natural polymer and essential oils, particularly lime, thyme, bergamont, clove and cinnamon. Important fungi such as B. cinerea, C. gloeosporioides, P. digitatum and Phythophthora drehsleri, and yeasts and molds on strawberries, figs, avocado (Bill, Sivakumar, Korsten, & Thompson, 2014), cucumber, mandarin and grapes were notably reduced and in some cases symptom appearance was delayed after application (Bill et al., 2014; Mohammadi, Hashemi, & Hosseini, 2015; Muñoz, Moret, & Garcés, 2009; Perdones, Sánchez-González, Chiralt, & Vargas, 2012; Sánchez-González, Cháfer, Chiralt, & González-Martínez, 2010; Shao et al., 2015; Timóteo-dos Santos et al., 2012).

c) Chitosan integrated with organic compounds

Ethanol

Ethanol, also called ethyl alcohol, is considered a common food additive. It can be obtained from, among other horticulture commodities, sugarcane, potato, corn, table grapes and cassava. Romanazzi, Karabulut, and Smilanick (2007) evaluated its effectiveness on table grapes by integrating 0.5 % chitosan and 20 % ethanol. This combination gave the best control of gray mold during 3 months storage at 1 ºC, followed by three days at ambient temperature to simulate commercial marketing.

Oleic and acetic acid

Studies have reported good preservation of strawberry fruit and prickly pear, based on coatings with chitosan combined with organic acids such as oleic and acetic acid (Ochoa-Velasco & Guerrero-Beltrán, 2014; Vargas, Albors, Chiralt, & González-Martínez, 2006). The overall results demonstrated that decay caused by fungi and bacteria was notably reduced. In strawberry, disease symptoms were delayed for 10 days and percentage infection at the end of the 14-day storage period was reduced by more than 70 %. In this study, fungal decay of untreated fruit was 100 %. For white and red prickly pears, bacteria and mold levels were maintained within the accepted levels reported by the Mexican Official Standard, after immersion in 1 % chitosan combined with 2.5 % acetic acid; however, treated fruit was not well-accepted by the sensory panel.

d) Chitosan integrated with inorganic and organic salts

For postharvest disease control, application of inorganic salts combined with chitosan is also reported to reduce fungal infections. On this, in experiments carried out to evaluate the effect of anthracnose on papaya fruit, it was concluded that 1 % chitosan combined with 3 % ammonium carbonate solutions was the best treatment to reduce severity and incidence during 14 days storage; the best combination to significantly inhibit anthracnose was that of 0.75 % chitosan and 2.5 % calcium (Al-Eryani-Raqeeb, Muda-Mohamed, Syed-Omar, Mohamed-Zaki, & Al-Eryani, 2009; Sivakumar, Sultanbawa, Ranasingh, Kumara, & Wijesundera, 2005).

For strawberry fruit coated with 2 % chitosan and 5 % Gluconal® (calcium lactate and calcium gluconate), an important reduction in molds occurred during cold storage. In ‘Driscoll’s’ and ‘Pugent Reliance’ disease inhibition was approximately 50 and 80 %, respectively, while for red raspberry ‘Tullmeen, there were no disease symptoms after 21 days storage. In line with these results, Hernández-Muñoz, Almenar, del Valle, Velez, and Gavara (2008) reported that strawberry ‘Camarosa’ coated with 1.5 % chitosan and 0.5 % calcium gluconate showed no visible symptoms of disease during the whole storage period at 10 ºC.

However, in further experiments, the incidence of gray mold disease was not significantly reduced with preharvest applications of chitosan combined with potassium silicate (Lopes, Zambolim, Costa, Pereira, & Finger, 2014). Likewise, the incorporation of 2 and 3 % potassium sorbate in 2 % chitosan solution slightly controlled R. stolonifer and Cladosporium development on strawberries, after 20 days storage (Park, Stan, Daeschel, & Zhao, 2005).

In other studies, the pear ‘Shuijing’ stored at 20 ºC showed 100 % inhibition of blue mold disease after 5 days of inoculation, due to previous application of 0.5 % chitosan coating combined with 1 % calcium chloride and the antagonist Cryptococcus laurentii (108 cell∙mL-1) (Yu et al., 2012). For grapefruit, 2 % chitosan solution combined with either 2 % sodium benzoate or 2 % potassium sorbate exceeded the effect of the fungicide sodium o-phenylphenate, against major postharvest fungi such as Geotrichum candidum var. citri-aurantii, P. expansum and P. digitatum (Abdel-Kader, El-Mougy, & Lashin, 2011).

e) Chitosan integrated with microorganisms

Biological control of postharvest decay of fruit and vegetables using antagonistic yeasts, bacteria and fungi has been explored as another of the promising alternatives to chemical fungicides.

On the issue, studies mention that a significant suppression (80 %) of blue mold development was achieved on green lemon ‘Eureka’ inoculated with the combination of 0.2 % glycolchitosan and Candida saitona (El-Ghaouth, Smilanick, & Wilson, 2000); authors highlighted that a previous application of sodium carbonate to the chitosan solution with the antagonist gave 95 % disease control. The synergistic effect of the combination of 0.5 % chitosan and the yeast Candida was also confirmed on two cvs. of mango fruit. Anthracnose levels of treated mangoes were 6.7 and 13.3 %, compared to 93.3 and 100 % for the control (Chantrasri, Sardsud, Sangchote, & Sardsud, 2007). For table grape bunches, postharvest application of the combination of 0.1 % chitosan with the antagonist Criptoccocus laurentii reduced decay by 0.15 (based on a 0.1 empirical scale) compared to 0.30 in the untreated fruit (Meng & Tian, 2009). In further research, grape bunches treated with 1 % chitosan and the above-mentioned antagonist showed a decay index of 0.15 compared to 0.35 in the control fruit (Meng, Qin, & Tian, 2010).

f) Chitosan integrated with fungicides

The use of synthetic fungicides is the most common procedure to control postharvest pathogens of fruit and vegetables. However, its integration with chitosan has been little studied. About this, preharvest assays under greenhouse conditions, carried out on strawberry flower ‘Corona’ with a mixture of chitosan (400 µg∙L-1) and different fungicides such as Teldor®, Switch®, Amistar® and Signum®, gave almost the same level of control of gray mold disease as the synthetic fungicides applied alone at 1 % of the recommended dose (Rahman et al., 2014). Overall, results indicated remarkable synergistic effects on disease control with the treatments combined, but by applying lower concentrations than those applied individually. In other studies in orange0 ‘Pera Rio’, the combination of 2 % chitosan with Thiabendazole and Imazalil resulted in fewer black spot lesions than on the untreated fruit (Rappussi, Benato, Cia, & Pascholati, 2011), but the chitosan-fungicide mixture did not surpass the effect of fungicides or chitosan applied individually.

g) Chitosan integrated with other coating materials

Surface coating and films can also provide an alternative for extending the postharvest life of fresh fruit and vegetables. For example, the combination of 1 % chitosan, polyethylene wax microemulsion and the antibiotic natamycin (20 mg∙L-1) improved the storage life of ‘Hami’ melon by decreasing disease incidence (Cong, Zhang, & Dong, 2007). In the study, the applied mixture significantly delayed rot appearance by three days, and at the end of 20 days storage, rot development reached only 17.1 cm2, compared with 313 cm2 on the surface of uncoated melons. In another study, mango fruit ‘Ataulfo’ coated with 1 % chitosan integrated with 1 % starch or 1 % pectin had better storage life in terms of lower percentage weight and firmness loss, and higher TSS content only at a controlled temperature of 10 ºC (Bello-Lara et al., 2016).

2. Chitosan nanoparticles in the control of phytopathogenic fungi

Control of postharvest pathogenic microorganisms by applying nanotechnology is an emerging technology; therefore, there is limited published information on this area. In addition, the literature reports are mainly about in vitro studies (Sotelo-Boyás, Bautista-Baños, Correa-Pacheco, Jiménez-Aparicio, & Sivakumar, 2016). For example, Chookhongkga, Sopondilok, and Photchanachai (2013) evaluated the effect of chitosan nanoparticles on mycelial growth of Rhizopus sp., C. capsici, C. gloeosporioides and A. niger, finding lower mycelial growth of 2.8, 2.2, 2.4 and 5.5 mm, respectively, at 0.6 % concentration. Other studies showed that applying chitosan nanoparticles at 0.1 % inhibited mycelia of A. alternata, Macrophomina phaseolina and Rhizoctonia solani (Saharan et al. 2013). Zahid, Alderson, Ali, Maqbool, and Manickam (2013) reported that low molecular weight chitosan nanoparticles at a 1 % concentration had the best inhibitory effect on conidial germination of C. gloeosporioides.

In further studies, Chowdappa, Gowda, Chethana, and Madhura (2014) reported on mango fruit that chitosan nanoparticles at 0.5 and 1 % reduced anthracnose disease by 45.7 and 71.3 %, respectively, while the combination of chitosan-Ag decreased the disease by 75.8 and 84.6 % at concentrations of 0.5 and 1 %, respectively.

Conclusions

Chitosan, the deacetylated form of chitin, can be extracted from diverse marine organisms, insects and some fungi. As previously stated, it has been considered as a biodegradable and biocompatible material with no toxicity or side effects. Presently, the use of chitosan has been technologically justified in sustainable agriculture programs since it raises no public health and safety concerns. The presence of amino groups (-NH2) in its chemical structure gives chitosan unique and ideal properties in different agricultural systems, including food conservation and food security through development of biodegradable edible coatings and films.

As described above, this biodegradable, bioactive and biosafety product may also be integrated with other methods in the control of postharvest decay of fruit and vegetables; nevertheless, in spite of its demonstrated positive effects, assays about its application to large-scale tests and its integration into postharvest commercial practices are still lacking: therefore, more studies on this subject are required. In addition, the integrated application of chitosan nanoemulsions with other safe non-polluting treatments offers a novel approach to preserve the overall quality of fresh produce during storage. Prior to commercialization, the integrated alternatives need to be tested on particular fruit and vegetable species, including temperate and tropical species.

References

Abbasi, N. A., Iqbal, Z., Maqbool, M., & Hafiz, I. A. (2009). Postharvest quality of mango (Mangifera indica L.) fruit as affected by chitosan coating. Pakistan Journal of Botany, 41(1), 343-357. Retrieved from http://www.pakbs.org/pjbot/PDFs/41(1)/PJB41(1)343.pdfLinks ]

Abdel-Kader, M., El-Mougy, N., & Lashin, S. (2011). Evaluation of grapefruit coating with chemical preservatives as control measure against postharvest decay. Phytopatologia, 59, 25-38. Retrieved from http://www.up.poznan.pl/~ptfit1/pdf/P59/P59_03.pdfLinks ]

Al-Eryani-Raqeeb, A., Muda-Mohamed, M. T., Syed-Omar, S. R., Mohamed-Zaki, A. R., & Al-Eryani, A. R. (2009). Effects of calcium and chitosan treatments on controlling anthracnose and postharvest quality of papaya (Carica papaya L.). International Journal of Agricultural Research, 4(2), 53-68. doi:10.3923/ijar.2009.53.68 [ Links ]

Ali, A., Zahid, N., Manickam, S., Siddiqui, Y., Alderson, P. G., & Maqbool, M. (2013). Effectiveness of submicron chitosan dispersions in controlling anthracnose and maintaining quality of dragon fruit. Postharvest Biology and Technology, 86, 147-153. doi:10.1016/j.postharvbio.2013.06.027 [ Links ]

Badawy, M. E. I., & Rabea, E. I. (2009). Potential of the biopolymer chitosan with different molecular weights to control postharvest gray mold of tomato fruit. Postharvest Biology and Technology, 51(1), 110-117. doi:10.1016/j.postharvbio.2008.05.018 [ Links ]

Bautista-Baños, S., Hernández-López, M., & Bosquez-Molina, E. (2004). Growth inhibition of selected fungi by chitosan and plant extracts. Mexican Journal Phytopathology, 22(2), 178-186. Retrieved from http://www.redalyc.org/pdf/612/61222204.pdfLinks ]

Bautista-Baños, S., Hernández-López, M., Bosquez-Molina, E., & Wilson, C. L. (2003). Effects of chitosan and plant extracts on growth of Colletotrichum gloeosporioides, anthracnose levels and quality of papaya fruit. Crop protection, 22(9), 1087-1092. doi:10.1016/S0261-2194(03)00117-0 [ Links ]

Bautista-Baños, S., Hernandez-Lauzardo, A. N., Velazquez-del Valle, M. G., Hernández-López, M., Barka, E. A., Bosquez-Molina, E., & Wilson, C. L. (2006). Chitosan as a potential natural compound to control pre and postharvest diseases of horticultural commodities. Crop Protection, 25(2), 108-118. doi:10.1016/j.cropro.2005.03.010 [ Links ]

Bautista-Baños, S., Romanazzi, G., & Jiménez-Aparicio, A. (2016a). Chitosan in the Preservation of Agricultural Commodities. USA: Academic Press/Elsevier. Retrieved from http://store.elsevier.com/Chitosan-in-the-Preservation-of-Agricultural-Commodities/isbn-9780128027356/Links ]

Bautista-Baños, S., Barrera-Necha, L. L., Hernández-López, M., & Rodríguez-González, F. (2016b). Morphological and ultrastructural modifications of chitosan-treated fungal phytopathogens. In: Bautista-Baños, S., Romanazzi, G., & Jiménez-Aparicio, A. (Eds.), Chitosan in the Preservation of Agricultural Commodities (pp. 251-271). USA: Academic Press/Elsevier . doi:10.1016/B978-0-12-802735-6.00009-4 [ Links ]

Bello-Lara, J. E., Balois-Morales, R., Juárez-López, P., Alia-Tejacal, I., Peña-Valdivia, C. B., Jiménez-Zurita, J. O., Sumaya-Martínez, M. T., & Jiménez-Ruíz, E. I. (2016). Coatings based on starch and pectin from ‘Pear’ banana (Musa ABB), and chitosan applied to postharvest ‘Ataulfo’ mango fruit. Revista Chapingo Serie Horticultura, 22(3), 209-218. doi: 10.5154/r.rchsh.2015.09.037 [ Links ]

Berúmen-Varela, G., Coronado-Partida, L. D., Ochoa-Jiménez, V. A., Chacón-López, M. A., & Gutiérrez-Martínez, P. (2015). Efecto del quitosanoen la inducción de resistencia contra Colletotrichum sp. en mango (Mangifera indica L.) cv. Tommy Atkins. Investigación y Ciencia, 23(66), 16-21. Retrieved from http://www.redalyc.org/articulo.oa?id=67446014003Links ]

Bill, M., Sivakumar, D., Korsten, L., & Thompson, A. K. (2014). The efficacy of combined application of edible coatings and thyme oil in inducing resistance components in avocado (Persea americana Mill.) against anthracnose during post-harvest storage. Crop Protection,64, 159-167. doi:10.1016/j.cropro.2014.06.015 [ Links ]

Casals, C., Elmer, P. A. G., Viñas, I., Teixidó, N., Sisquella, M., & Usall, J. (2012). The combination of curing with either chitosan or Bacillus subtilis CPA-8 to control brown rot infections caused by Monilinia fructicola. Postharvest Biology and Technology, 64(1), 126-132. doi:10.1016/j.postharvbio.2011.06.004 [ Links ]

Chailoo, M. J., & Asghari, M. R. (2011). Hot water and chitosan treatment for the control of postharvest decay in sweet cherry (Prunus avium L.) cv. Napoleon (Napolyon).Journal of Stored Products and Postharvest Research, 2(7), 135-138. Retrieved from http://www.academicjournals.org/journal/JSPPR/article-full-text-pdf/EFA386E8909Links ]

Chantrasri, P., Sardsud, V., Sangchote, S., & Sardsud, U. (2007). Combining yeasts and chitosan treatment to reduce anthracnose fruit rot in mangoes. Asian Journal of Biology Education, 3, 40-46. [ Links ]

Chookhongkga, N., Sopondilok, T., & Photchanachai, S. (2013). Effect of chitosan and chitosan nanoparticles on fungal growth and chilli seed quality. I International Conference on Postharvest Pest and Disease Management in Exporting Horticultural Crops-PPDM2012, 973, 231-237. doi:10.17660/ActaHortic.2013.973.32 [ Links ]

Chowdappa, P., Gowda, S., Chethana, C. S., & Madhura, S. (2014). Antifungal activity of chitosan-silver nanoparticle composite against Colletotrichum gloeosporioides associated with mango anthracnose. African Journal of Microbiology Research, 8(17), 1803-1812. doi:10.5897/AJMR2013.6584 [ Links ]

Cindi, M. D., Shittu, T., Sivakumar, D., & Bautista-Baños, S. (2015). Chitosan boehmite-alumina nanocomposite films and thyme oil vapour control brown rot in peaches (Prunus persica L.) during postharvest storage. Crop Protection, 72, 127-131. doi:10.1016/j.cropro.2015.03.011 [ Links ]

Cong, F., Zhang, Y., & Dong, W. (2007). Use of surface coatings with natamycin to improve the storability of Hami melon at ambient temperature. Postharvest Biology and Technology, 46(1), 71-75. doi:10.1016/j.postharvbio.2007.04.005 [ Links ]

de Oliveira, E. N., el Gueddari, N. E., Moershbacher, B. M., & Franco, T. T. (2012a). Growth rate inhibition of phytopathogenic fungi by characterized chitosans. Brazilian Journal of Microbiology, 43(2), 800-809. doi:10.1590/S1517-83822012000200046 [ Links ]

de Oliveira, E. N., de Melo, S. I., & Teixeira, F. T. (2012b). Changes in hyphal morphology due to chitosan treatment in some fungal species. Brazilian Archives of Biology and Technology, 55(5), 637-646. doi: 10.1590/S1516-89132012000500001 [ Links ]

Dutta, P. K., Tripathi, S., Mehrotra, G. K., & Dutta, J. (2009). Perspectives for chitosan based antimicrobial films in food applications. Food Chemistry, 114(4), 1173-1182. doi:10.1016/j.foodchem.2008.11.047 [ Links ]

El-Ghaouth, A., Smilanick, J. L., & Wilson, C. L. (2000). Enhancement of the performance of Candida saitoana by the addition of glycolchitosan for the control of postharvest decay of apple and citrus fruit. Postharvest Biology and Technology, 19(1), 103-110. doi:10.1016/S0925-5214(00)00076-4 [ Links ]

Freitas, P. M., López-Gálvez, F., Tudela, J. A., Gil, M. I., & Allende, A. (2015). Postharvest treatment of table grapes with ultraviolet-C and chitosan coating preserves quality and increases stilbene content. Postharvest Biology and Technology, 105, 51-57. doi:10.1016/j.postharvbio.2015.03.011 [ Links ]

Gutiérrez-Martínez, P., Chacón-López, M., Xoca-Orozco, L., Ramos-Guerrero, A., Velázquez-Estrada, R., & Aguilera-Aguirre, S. (2016). Chitosan and changes in gene expression during fruit-pathogen interaction at postharvest stage. In: Bautista-Baños, S., Romanazzi, G., & Jiménez-Aparicio, A. (Eds.), Chitosan in the Preservation of Agricultural Commodities 11, (pp. 299-311). USA: Academic Press/Elsevier . doi:10.1016/B978-0-12-802735-6.00011-2 [ Links ]

Henics, T., & Wheatley, D. (1999). Cytoplasmic vacuolation, adaptation and cell wall. A view of new perspectives and features. Biology of the Cell, 91(7), 485-98. doi: 10.1016/S0248-4900(00)88205-2 [ Links ]

Hernández-Muñoz, P., Almenar, E., del Valle, V., Velez, D., & Gavara, R. (2008). Effect of chitosan coating combined with postharvest calcium treatment on strawberry (Fragaria × ananassa) quality during refrigerated storage. Food Chemistry, 110(2), 428-435. doi:10.1016/j.foodchem.2008.02.020 [ Links ]

Hernández-Téllez, C. N., Plascencia-Jatomea, M., & Cortez-Rocha, M. O. (2016). Chitosan-based bionanocomposites: development and perspectives in food and agricultural applications. In: Bautista-Baños, S., Romanazzi, G., & Jiménez-Aparicio, A. (Eds.), Chitosan in the Preservation of Agricultural Commodities 12, (pp. 315-338). USA: Academic Press/Elsevier . doi: 10.1016/B978-0-12-802735-6.00012-4 [ Links ]

Hewajulige, I. G. N., Sultanbawa, Y., Wijeratnam, R. S., & Wijesundara, R. L. C. (2009). Effect of irradiated chitosan treatment on storage life of fruits of two commercially grown papaya (Carica papaya L.) varieties. Journal of the National Science Foundation of Sri Lanka, 37(1), 61-66. doi: 10.4038/jnsfsr.v37i1.458 [ Links ]

Jinasena, D., Pathirathna, P., Wickramarachchi, S., & Marasinghe, E. (2011). Effect of chitosan (unirradiated and irradiated) treatment on anthracnose disease and its potential to increase the shelf life of "Embul" banana. International Journal of Environmental Science and Development, 2(4), 248. Retrieved from http://www.ijesd.org/papers/132-A10017.pdfLinks ]

Jung, J. H., Kim, S. W., Lamsal, K., Kim, Y. S., Park, H. J., & Lee, Y. S. (2011). Effect of chitosan coated fungicide against Colletotrichum gloeosporioides and powdery mildew. Journal of Agricultural Life and Environmental Sciences, 23(2), 14-22. [ Links ]

Li, H., & Yu, T. (2000). Effect of chitosan on incidence of brown rot, quality and physiological attributes of postharvest peach fruit. Journal of the Science of Food and Agriculture, 81(2), 269-274. doi:10.1002/1097-0010(20010115)81:2<269::AID-JSFA806>3.0.CO;2-F [ Links ]

Li, X. F., Feng, X. Q., Yang, S., Wang, T. P., & Su, Z. X. (2008). Effects of molecular weight and concentration of chitosan on antifungal activity against Aspergillus niger. Iranian Polymer Journal, 17(11), 843-852. Retrieved from http://www.sid.ir/en/VEWSSID/J_pdf/81320081104.pdfLinks ]

Lizardi-Mendoza, J., Argüelles-Monal, W. M., & Goycoolea-Valencia, F. M. (2016). Chemical characteristics and functional properties of chitosan. In: Bautista-Baños, S., Romanazzi G., & Jiménez-Aparicio, A. (Eds.), Chitosan in the Preservation of Agricultural Commodities 1, (pp. 3-31). USA: Academic Press/Elsevier . doi: 10.1016/B978-0-12-802735-6.00001-X [ Links ]

Liu, J., Tian, S., Meng, X., & Xu, Y. (2007). Effects of chitosan on control of postharvest diseases and physiological responses of tomato fruit. Postharvest Biology and Technology, 44(3), 300-306. doi: 10.1016/j.postharvbio.2006.12.019 [ Links ]

López-Mora, L. I., Gutiérrez-Martínez, P., Bautista-Baños, S., Jiménez-García, L. F., & Zavaleta-Mancera, H. A. (2013). Evaluación de la actividad antifúngica del quitosanoen Alternaria alternata y en la calidad del mango 'Tommy Atkins' durante el almacenamiento. Revista Chapingo Serie horticultura, 19(3), 315-331. doi: 10.5154/r.rchsh.2012.07.038 [ Links ]

Lopes, U. P., Zambolim, L., Costa, H., Pereira, O. L., & Finger, F. L. (2014). Potassium silicate and chitosan application for gray mold management in strawberry during storage. Crop Protection, 63, 103-106. doi: 10.1016/j.cropro.2014.05.013 [ Links ]

Meng, X. H., Qin, G. Z., & Tian, S. P. (2010). Influences of preharvest spraying Cryptococcus laurentii combined with postharvest chitosan coating on postharvest diseases and quality of table grapes in storage. LWT-Food Science and Technology, 43(4), 596-601. doi: 10.1016/j.lwt.2009.10.007 [ Links ]

Meng, X. H., & Tian, S. (2009). Effects of preharvest application of antagonistic yeast combined with chitosan on decay and quality of harvested table grape fruit. Journal of the Science of Food and Agriculture, 89(11), 1838-1842. doi: 10.1002/jsfa.3659 [ Links ]

Mohammadi, A., Hashemi, M., & Hosseini, S. M. (2015). Chitosan nanoparticles loaded with Cinnamomum zeylanicum essential oil enhance the shelf life of cucumber during cold storage. Postharvest Biology and Technology, 110, 203-213. doi: 10.1016/j.postharvbio.2015.08.019 [ Links ]

Muñoz, Z., Moret, A., & Garcés, S. (2009). Assessment of chitosan for inhibition of Colletotrichum sp. on tomatoes and grapes. Crop Protection, 28(1), 36-40. doi: 10.1016/j.cropro.2008.08.015 [ Links ]

Ochoa-Velasco, C. E., & Guerrero-Beltrán, J. Á. (2014). Postharvest quality of peeled prickly pear fruit treated with acetic acid and chitosan. Postharvest Biology and Technology, 92, 139-145. doi: 10.1016/j.postharvbio.2014.01.023 [ Links ]

Palma‐Guerrero, J., Lopez‐Jimenez, J. A., Pérez‐Berná, A. J., Huang, I. C., Jansson, H. B., Salinas, J., Villalaín, J., Read, N. D., & Lopez‐Llorca, L. V. (2010). Membrane fluidity determines sensitivity of filamentous fungi to chitosan. Molecular microbiology, 75(4), 1021-1032. doi: 10.1111/j.1365-2958.2009.07039.x [ Links ]

Park, S. I., Stan, S. D., Daeschel, M. A., & Zhao, Y. (2005). Antifungal coatings on fresh strawberries (Fragaria × ananassa) to control mold growth during cold storage. Journal of Food Science, 70(4), 202-207. doi: 10.1111/j.1365-2621.2005.tb07189.x [ Links ]

Peña, A., Sánchez, N. S., & Calahorra, M. (2013). Effects of chitosan on Candida albicans: conditions for its antifungal activity. BioMed Research International, 2013, 1-15. doi: 10.1155/2013/527549 [ Links ]

Perdones, A., Sánchez-González, L., Chiralt, A., & Vargas, M. (2012). Effect of chitosan-lemon essential oil coatings on storage-keeping quality of strawberry. Postharvest Biology and Technology, 70, 32-41. doi: 10.1016/j.postharvbio.2012.04.002 [ Links ]

Plascencia‐Jatomea, M., Viniegra, G., Olayo, R., Castillo‐Ortega, M. M., & Shirai, K. (2003). Effect of chitosan and temperature on spore germination of Aspergillus niger. Macromolecular Bioscience, 3(10), 582-586. doi: 10.1002/mabi.200350024 [ Links ]

Rahman, M. H., Shovan, L. R., Hjeljord, L. G., Aam, B. B., Eijsink, V. G., Sørlie, M., & Tronsmo, A. (2014). Inhibition of fungal plant pathogens by synergistic action of chito-oligosaccharides and commercially available fungicides. Plos one, 9(4), 1-10. doi: 10.1371/journal.pone.0093192 [ Links ]

Ramos-García, M., Bosquez-Molina, E., Hernández-Romano, J., Zavala-Padilla, G., Térres-Rojas, E., Alia-Tejacal, I., Barrera-Necha, L., Hernández-López, M., & Bautista-Baños, S. (2012). Use of chitosan-based edible coatings in combination with other natural compounds, to control Rhizopus stolonifer and Escherichia coli DH5α in fresh tomatoes. Crop Protection, 38, 1-6. doi: 10.1016/j.cropro.2012.02.016 [ Links ]

Rappussi, M. C. C., Benato, E. A., Cia, P., & Pascholati, S. F. (2011). Chitosan and fungicides on postharvest control of Guignardia citricarpa and on quality of 'Pêra Rio' oranges. Summa Phytopathologica, 37(3), 142-144. doi: 10.1590/S0100-54052011000300011 [ Links ]

Ren, J., Liu, J., Li, R., Dong, F., & Guo, Z. (2012). Antifungal properties of chitosan salts in laboratory media. Journal of Applied Polymer Science, 124(3), 2501-2507. doi: 10.1002/app.33612 [ Links ]

Rodríguez-Pedroso, A. T., Ramírez-Arrebato, M. A., Rivero-González, D., Bosquez-Molina, E., Barrera-Necha, L. L., & Bautista-Baños, S. (2009). Propiedades químico-estructurales y actividad biológica de la quitosano en microorganismos fitopatógenos. Revista Chapingo Serie Horticultura, 15(3), 307-319. doi: 10.5154/r.rchsh.2009.15.042 [ Links ]

Romanazzi, G., Nigro, F., & Ippolito, A., (2001). Chitosan in the control of postharvest decay of some Mediterranean fruits. In: Muzarelli, R. A. A. (Ed.), Chitin Enzymology (pp. 141-146). Italy: Atec. [ Links ]

Romanazzi, G., Nigro, F., & Ippolito, A. (2003). Short hypobaric treatments potentiate the effect of chitosan in reducing storage decay of sweet cherries. Postharvest Biology and Technology, 29(1), 73-80. doi: 10.1016/S0925-5214(02)00239-9 [ Links ]

Romanazzi, G., Gabler, F. M., & Smilanick, J. L. (2006). Preharvest chitosan and postharvest UV irradiation treatments suppress gray mold of table grapes. Plant Disease, 90(4), 445-450. doi: 10.1094/PD-90-0445 [ Links ]

Romanazzi, G., Karabulut, O. A., & Smilanick, J. L. (2007). Combination of chitosan and ethanol to control postharvest gray mold of table grapes. Postharvest biology and technology, 45(1), 134-140. doi: 10.1016/j.postharvbio.2007.01.004 [ Links ]

Romanazzi, G., & Feliziani, E. (2016). Use of chitosan to control postharvest decay of temperate fruit: effectiveness and mechanisms of action. In: Bautista-Baños, S., Romanazzi, G., & Jiménez-Aparicio, A. (Eds.), Chitosan in the Preservation of Agricultural Commodities 6 (pp. 155.177). USA: Academic Press/Elsevier . doi: 10.1016/B978-0-12-802735-6.00006-9 [ Links ]

Sabaghi, M., Maghsoudlou, Y., Khomeiri, M., & Ziaiifar, A. M. (2015). Active edible coating from chitosan incorporating green tea extract as an antioxidant and antifungal on fresh walnut kernel. Postharvest Biology and Technology, 110, 224-228. doi: 10.1016/j.postharvbio.2015.08.025 [ Links ]

Saharan, V., Mehrotra, A., Khatik, R., Rawal, P., Sharma, S., & Pal, A. (2013). Synthesis of chitosan based nanoparticles and their in vitro evaluation against phytopathogenic fungi. International Journal of Biological Macromolecules, 62, 677-683. doi: 10.1016/j.ijbiomac.2013.10.012 [ Links ]

Sánchez-Domínguez, D., Ríos, M. Y., Castillo-Ocampo, P., Zavala-Padilla, G., Ramos-García, M., & Bautista-Baños, S. (2011). Cytological and biochemical changes induced by chitosan in the pathosystem Alternaria alternata-tomato. Pesticide biochemistry and physiology, 99(3), 250-255. doi: 10.1016/j.pestbp.2011.01.003 [ Links ]

Sánchez-González, L., Cháfer, M., Chiralt, A., & González-Martínez, C. (2010). Physical properties of edible chitosan films containing bergamot essential oil and their inhibitory action on Penicillium italicum.Carbohydrate Polymers, 82(2), 277-283. doi: 10.1016/j.carbpol.2010.04.047 [ Links ]

Sánchez-González, L., Vargas, M., González-Martínez, C., Chiralt, A., & Cháfer, M. (2011). Use of essential oils in bioactive edible coatings: a review. Food Engineering Reviews, 3(1), 1-16. doi: 10.1007/s12393-010-9031-3 [ Links ]

Shao, X., Cao, B., Xu, F., Xie, S., Yu, D., & Wang, H. (2015). Effect of postharvest application of chitosan combined with clove oil against citrus green mold. Postharvest Biology and Technology, 99, 37-43. doi: 10.1016/j.postharvbio.2014.07.014 [ Links ]

Sivakumar, D., Sultanbawa, Y., Ranasingh, N., Kumara, P., & Wijesundera, R. (2005). Effect of the combined application of chitosan and carbonate salts on the incidence of anthracnose and on the quality of papaya during storage. The Journal of Horticultural Science and Biotechnology, 80(4), 447-452. doi: 10.1080/14620316.2005.11511958 [ Links ]

Sivakumar, D., Malick, B., Korsten, L., & Thompson, K. A. (2016). Integrated application of chitosan coating with different postharvest treatments on the control of postharvest decay and maintenance of overall fruit quality. In: Bautista-Baños, S., Romanazzi, G., & Jiménez-Aparicio, A. (Eds.), Chitosan in the Preservation of Agricultural Commodities 5 (pp. 127-153). USA: Academic Press/Elsevier . doi: 10.1016/B978-0-12-802735-6.00005-7 [ Links ]

Sotelo-Boyás, M. E., Bautista-Baños, S., Correa-Pacheco, Z. N., Jiménez-Aparicio, A., & Sivakumar, D. (2016). Biological activity of chitosan nanoparticles against pathogenic fungi and bacteria. In: Bautista-Baños, S., Romanazzi, G., Jiménez-Aparicio, A. (Eds.), Chitosan in the Preservation of Agricultural Commodities 13 (pp. 339-349). USA: Academic Press/Elsevier . doi: 10.1016/B978-0-12-802735-6.00013-6 [ Links ]

Timóteo-dos Santos, N. S., Athayde-Aguilar, A. J., Vanconceslos-de Oliveira, C. E., Veríssimo-de Sales, C. V., de Melo-e Silva, S., Sousa-da Silva, R., Montenegro-Stamford, T. C., & Leite-de Souza, E. (2012). Efficacy of the application of a coating composed of chitosan and Origanum vulgare L. essential oil to control Rhizopus stolonifer and Aspergillus niger in grapes (Vitis labrusca L.). Food microbiology, 32(2), 345-353. doi: 10.1016/j.fm.2012.07.014 [ Links ]

Vargas, M., Albors, A., Chiralt, A., & González-Martínez, C. (2006). Quality of cold-stored strawberries as affected by chitosan-oleic acid edible coatings. Postharvest Biology and Technology, 41(2), 164-171. doi: 10.1016/j.postharvbio.2006.03.016 [ Links ]

Xu, W. T., Huang, K. L., Guo, F., Qu, W., Yang, J. J., Liang, Z. H., & Luo, Y. B. (2007). Postharvest grapefruit seed extract and chitosan treatments of table grapes to control Botrytis cinerea. Postharvest Biology and Technology, 46(1), 86-94. doi: 10.1016/j.postharvbio.2007.03.019 [ Links ]

Yang, G., Yue, J., Gong, X., Qian, B., Wang, H., Deng, Y., & Zhao, Y. (2014). Blueberry leaf extracts incorporated chitosan coatings for preserving postharvest quality of fresh blueberries. Postharvest Biology and Technology, 92, 46-53. doi: 10.1016/j.postharvbio.2014.01.018 [ Links ]

Younes, I., & Rinaudo, M. (2015). Chitin and chitosan preparation from marine sources. Structure, properties and applications. Marine drugs, 13(3), 1133-1174. doi: 10.3390/md13031133 [ Links ]

Yu, T., Yu, C., Chen, F., Sheng, K., Zhou, T., Zunun, M., & Zheng, X. (2012). Integrated control of Moho azul in pear fruit by combined application of chitosan, a biocontrol yeast and calcium chloride. Postharvest Biology and Technology, 69, 49-53. doi: 10.1016/j.postharvbio.2012.02.007 [ Links ]

Zahid, N., Alderson, P., Ali, A., Maqbool, M., & Manickam, S. (2013) In vitro control of Colletotrichum gloeosporioides by using chitosan loaded nanoemulsions. Acta Horticulturae, 1012, 769-74. doi: 10.17660/ActaHortic.2013.1012.104 [ Links ]

Received: November 24, 2016; Accepted: April 21, 2017

*Corresponding author:sbautis@ipn.mx, tel. 735 394 20 20 ext. 82571.

Creative Commons License This is an open-access article distributed under the terms of the Creative Commons Attribution License