Investigación

 

Topometry and color association by RGB Fringe Projection Technique

 

Y.Y. López Domínguez, A. Martínez, and J.A. Rayas

 

Centro de Investigaciones en Óptica A.C., Loma del Bosque # 115 Col. Lomas del Campestre, León Gto. 37150. e-mail: yanetld@cio.mx, jrayas@cio.mx, Amalia@cio.mx

 

Received 26 June 2012.
Accepted 8 November 2013.

 

Abstract

Three - dimensional object topography is obtained using the fringe projection technique. In fringe projection technique, digitalization is done when black and white fringes are projected over the sample object and the image is captured by the CCD. After that, phases of projected fringes on the surface are evaluated by phase shifting method. This paper presents a proposed method in which red, green and blue fringes are projected. This is very useful when the surface of interest contain large depth discontinuities, because the color encoded stripes avoid losing the fringe order. Doing the phase stepping, topography for each color (RGB) is obtained and the resulting reconstruction is the average of this three images. Using this method, we obtain more information about color, texture and topography details of the object. This method has a lot of applications area, such as archeology and the medical field, because it is possible to duplicate components with major information of color and topography.

Keywords: 3D reconstruction; fringe projection; RGB fringes; color association.

 

PACS: 43.30.-d;43.30.Va;43.30.Wb

 

DESCARGAR ARTÍCULO EN FORMATO PDF

 

Acknowledgements

This research is part of the project supported by Conacyt through grant 180449 and the PhD program scholarship granted by Conacyt.

 

References

1. A. Martínez, J. A. Rayas, H. J. Puga, Katia Genovese, "Iterative estimation of the topography measurement by fringe projection method with divergent illumination by considering the pitch variation along the x and z directions", Vol. 48 N₀ 9, (Optics and Lasers in Engineering, a publicarse en September 2010). pp. 877-881.         [ Links ]

2. J. A. Rayas, R. Rodríguez Vera, A. Martínez, "Three-dimensional micro-topography by Talbot-projected fringes", fifth symposium Optics in Industry, edited by Eric Rosas, Rocío Cardoso, Juan C. Bermudez, Oracio Barbosa García, Proc. Of SPIE, Vol. 6046 (SPIE, Bellingham, WA January 2006), pp. 60461 y-1 to 60461 y-6.         [ Links ]

3. Wei Hung Su, Optics Express 15 (2007) 13167.         [ Links ]

4. Z. H. Zhang, C. E. Towers, D P Towers, Journal of Optics A: Pure and Applied Optics 9 (2007) S81 - S86. Online at www.stacks.iop.org/JOptA/97S81        [ Links ]

5. RS. Huang, Q.Y. Hu, F. Jin, F.R Chiang, Optical Engineering 38 (1999) 1065-71.         [ Links ]

6. O.A. Skydan, M.J. Lalor, D.R. Burton, Optics and Lasers in Engineering 43 (2005) 801 - 14.         [ Links ]

7. Song Zhang, Shing-Tung Yau, Optical Engineering 47 (2008) 123604.         [ Links ]

8. A. Martínez, J.A Rayas, J. M. Flores M, R. Rodríguez Vera, D. Donato Aguayo, Rev. Mex. Fis. 51 (2005) 431 - 436.         [ Links ]

9. Kjell J. Gasvik, "Moiré Methods. Triangulation" en "Optical Metrology, (Wiley 2002, Third Edition). pp 173 - 190.         [ Links ]

10. D. Malacara, M. Servin, Z. Malacara, "Phase shifting interferometry" en "Interferogram analysis for optical testing", Marcel Dekker, Inc 1998, pp 247 - 278.         [ Links ]

11. D. Malacara, "Color vision and colorimetry: Theory and applications", (SPIE Press, USA, 2° Edition 2011).         [ Links ]