SciELO - Scientific Electronic Library Online

 
vol.56 issue1Medidor de distancias con referencia interferometricaCalentador de sustratos compacto y de bajo costo para tratamiento térmico in situ de películas delgadas depositadas por rf-sputtering author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Revista mexicana de física

Print version ISSN 0035-001X

Rev. mex. fis. vol.56 n.1 México Feb. 2010

 

Instrumentación

 

Reduction of splice loss between dissimilar fibers by tapering and fattening

 

A. Martínez–Riosª, I. Torres–Gómezª, D. Monzon–Hernandezª, O. Barbosa–Garciaª and V.M. Duran–Ramirezb

 

ª Centro de Investigaciones en Óptica A. C. Loma del Bosque 115, Col. Lomas del Campestre, León, Guanajuato, México, e–mails: amr6@cio.mx, itorres@cio.mx, dmonzon@cio.mx, barbosag@cio.mx

b Centro Universitario de Los Lagos, Universidad de Guadalajara, e–mail: vicduranr@hotmail.com

 

Recibido el 28 de agosto de 2009
Aceptado el 25 de enero de 2010

 

Abstract

A method for reducing splice loss between dissimilar optical fibers is presented. The fibers are first spliced by using a standard fusion splicing procedure, and then the fiber with the greater core is tapered before the splice point, while the fiber with the smaller core is fattened. By using this technique we have consistently obtained splice loss values of 0.13 dB between a DS/SMF and an SMF28 fiber, and 0.09 dB between a 980HP fiber and an SMF28 fiber.

Keywords: Optical fibers; fusion splicing; tapering; fattening.

 

Resumen

Presentamos un método para reducir las perdidas en empalmes entre fibras ópticas con diferentes características. Las fibras son unidas usando un procedimiento de fusión estándar, para luego reducir el diámetro de la fibra con el núcleo de mayor tamaño antes del punto de unión, mientras que la fibra con el diámetro de núcleo menor es ensanchada. Mediante el uso de esta técnica hemos obtenido de manera consistente perdidas de 0.13 dB en un empalme entre una fibra DS/SMF y una fibra SMF28, y perdidas de 0.09 dB en un empalme entre una fibra 980HP y una fibra SMF28.

Descriptores: Fibras ópticas; empalmado por fusión; afilado; engrosado.

 

PACS:42.81.Bm;42.81.Cn

 

DESCARGAR ARTÍCULO EN FORMATO PDF

 

Acknowledgments

This work was supported by CONACYT grant no. 47733.

 

References

1. M. Kihara, S. Tomita, and M. Matsumoto, IEEE Phot. Technol. Lett. 4 (1992) 1390.        [ Links ]

2. Akihiko Ishikura, Yasuyuki Kato, and Mitsuru Miyauchi, Appl. Opt. 25 (1986) 3465.        [ Links ]

3. E.M. O'Brien and C.D. Hussey, Electron. Lett. 35 (1999) 168.        [ Links ]

4. A.D. Yablon and M. Sumetsky, Opt. Lett. 32 (2007) 617.        [ Links ]

5. M. Kihara, M. Matsumoto, T. Haibara, and S. Tomita, J. Lightwave Technol. 14 (1996) 2209.        [ Links ]

6. J.S. Harper, C.P. Botham, and S. Hornung, Electron. Lett. 24 (1988) 245.        [ Links ]

7. A.D. Yablon, Optical Fiber Fusion Splicing (Springer, New York, 2005).        [ Links ]

8. A. Ghatak and K. Thyagarajan, Introduction to Fiber Optics (Cambridge University Press, New York, USA, 1998).        [ Links ]

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License