SciELO - Scientific Electronic Library Online

 
vol.56 issue1Bonding of water to copper atom at an almost random interactionReduction of splice loss between dissimilar fibers by tapering and fattening author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Revista mexicana de física

Print version ISSN 0035-001X

Rev. mex. fis. vol.56 n.1 México Feb. 2010

 

Instrumentación

 

Medidor de distancias con referencia interferometrica

 

A. Jaramillo–Núñez y M. Pérez–Meza*

 

Instituto Nacional de Astrofísica, Óptica y Electrónica, Apartado Postal 51 y 216, Pue., 72000 México, e–mail: ajaramil@inaoep.mx

 

Recibido el 1 de junio de 2009
Aceptado el 18 de enero de 2010

 

Resumen

En este trabajo se describe un instrumento óptico para medir distancias. Su funcionamiento está basado en un interferómetro de desplazamiento lateral y en la observación del paralelismo entre dos patrones de franjas rectas. Cálculos realizados en computadora muestran las distancias que se pueden medir, aunque en la práctica no es posible llegar a las predicciones teóricas ya que el instrumento requiere una calibración previa, por lo que el rango de medición que se analiza es sólo de 3000 mm. Debido a que la distancia se obtiene desplazando una lente, la resolución e incertidumbre de medición del instrumento se ven afectadas por este elemento óptico.

Descriptores: Interferómetros; interferencia; lentes; haz colimado.

 

Abstract

An instrument for measuring distances is described. Its functioning is based in a lateral shearing interferometer and the observation of the collimation of a laser beam. Two interference patterns of straight fringes are used to measure the distance and only when the fringes are parallels the measurement is considered. Results obtained and related with resolution and uncertainty of measurement of the instrument are presented.

Keywords: Interferometers; interference; lenses; collimated beam.

 

PACS: 07.60Ly; 42.25.Hz; 42.79.Bh; 42.79.Ag

 

DESCARGAR ARTÍCULO EN FORMATO PDF

 

Referencias

1. J.Z. Malacara, Angle, distance, curvature and focal length measurements, in Optical shop testing, D. Malacara (Ed) (John Wiley and Sons, 1978) Chap. 18.        [ Links ]

2. A. García–Valenzuela, H. Valenzo–Aoki, C. Sánchez–Pérez y V. Argueta–Díaz, Opt. Eng. 46 (2007) 040505.        [ Links ]

3. D.S. Mehta, P. Singh, M.S. Faridi, S. Mirza y C. Shakher, Opt. Eng. 44 (2005) 063602.        [ Links ]

4. R.S. Sirohi y M.P. Kothiyal, Length measurement techniques, in Optical components, systems, and measurements techniques (Marcel Dekker Inc 1991) Chap. 4.        [ Links ]

5. A. Jaramillo–Núñez y B. Sánchez–Rinza, JART 3 (2005) 187.        [ Links ]

6. M.V.R.K. Murty, Appl. Opt. 3 (1964) 531.        [ Links ]

7. L. Gouhua, Z. Mingstan y Z. Imbm, Appl. Opt. 31 (1992) 4363.        [ Links ]

8. E. Hecht, Óptica, 3ª ed. (Addison Wesley Iberoamericana 1998) p. 160.        [ Links ]

 

Nota:

*. Universidad de la Sierra Sur, Miahuatlán de Porfirio Díaz, Oax., México, e–mail: arielmonp@hotmail.com

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License