SciELO - Scientific Electronic Library Online

 
vol.22 número2Combate químico del agallador Andricus quercuslaurinus Melika & Pujade-Villar (Cynipidae) en Quercus affinis Scheidw.Modelado de la distribución potencial de especies de Pinaceae bajo escenarios de cambio climático en Michoacán índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Revista Chapingo serie ciencias forestales y del ambiente

versión On-line ISSN 2007-4018versión impresa ISSN 2007-3828

Resumen

SOTOMAYOR-CASTELLANOS., Javier R.. Dynamic modulus of rigidity of seven types of Mexican wood determined by torsional vibration. Rev. Chapingo ser. cienc. for. ambient [online]. 2016, vol.22, n.2, pp.125-134. ISSN 2007-4018.  https://doi.org/10.5154/r.rchscfa.2015.03.008.

The modulus of rigidity of wood is useful for the structural calculus and manufacture of wood products. The objective of this research was to determine the modulus of rigidity (GLT) of seven species of Mexican woods (Enterolobium cyclocarpum, Tabebuia donnell-smithii, T. rosea, Swietenia humilis, Lysiloma acapulcensis, Cordia elaeagnoides y T. chrysantha), performing torsional vibration tests. The density, moisture content and natural frequency of smaller specimens were also determined. The GLT values of the seven species are similar to those proposed by the revised authors for woods with comparable density and moisture content. The moduli of rigidity varied between 695 MPa and 2,807 MPa 695 MPa (E. cyclocarpum) y 2,807 MPa (T. chrysantha). The values for each species oscillate around the linear prediction proposed by the elastic model of the wood. The wood density and the natural frequency of vibrations in torsion are predictors of the dynamic modulus of rigidity with coefficients of determination of 0.98 and 0.81 respectively.

Palabras llave : Density; humidity content; torsional natural frequency; mechanical characterization.

        · resumen en Español     · texto en Español | Inglés     · Español ( pdf ) | Inglés ( pdf )