SciELO - Scientific Electronic Library Online

 
vol.9 número18Análisis de la evaporación y cambio climático en el centro de MéxicoMedición del volumen de pesas de referencia de balanzas de presión mediante comparador óptico índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Nova scientia

versão On-line ISSN 2007-0705

Resumo

ITURRI-HINOJOSA, A.; MARTYNYUK, A. E.  e  LOPEZ-BONILLA, J. L.. Design of a Horn - RADANT Lens antenna with electronic beam scanning for Ka Band. Nova scientia [online]. 2017, vol.9, n.18, pp.94-117. ISSN 2007-0705.  https://doi.org/10.21640/ns.v9i18.684.

The design of a Horn-RADANT lens with electronic beam scanning for the Ka frequency band is presented. The prototype of the antenna consists of a 2bit Radant lens installed on the aperture of an E-sectorial horn antenna. A pair of grids, with rectangular slot antenna printed on dielectric substrate with PIN diode switch as load in each node generates 90° phase shift of the incident wave with reflection coefficient lower than -4.3 dB, and a transmission coefficient above -0.34 dB. The lens performance designed with three pair of grids, over an E-polarized plane wave, is experimentaly verified. Using a mathematical model for the design, the RADANT lens geometry and the adecuate configuration of the bias switches have been obtained, reaching electronic beam-steering angles of 11.35° and 8.6°, both of them with directivity greater than 14 dB.

Palavras-chave : Radant lens; E-sectorial horn antenna; electronically beam scanning; p-i-n diode switches.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )