SciELO - Scientific Electronic Library Online

 
vol.9 número18Análisis de la evaporación y cambio climático en el centro de MéxicoMedición del volumen de pesas de referencia de balanzas de presión mediante comparador óptico índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Nova scientia

versión On-line ISSN 2007-0705

Resumen

ITURRI-HINOJOSA, A.; MARTYNYUK, A. E.  y  LOPEZ-BONILLA, J. L.. Design of a Horn - RADANT Lens antenna with electronic beam scanning for Ka Band. Nova scientia [online]. 2017, vol.9, n.18, pp.94-117. ISSN 2007-0705.  https://doi.org/10.21640/ns.v9i18.684.

The design of a Horn-RADANT lens with electronic beam scanning for the Ka frequency band is presented. The prototype of the antenna consists of a 2bit Radant lens installed on the aperture of an E-sectorial horn antenna. A pair of grids, with rectangular slot antenna printed on dielectric substrate with PIN diode switch as load in each node generates 90° phase shift of the incident wave with reflection coefficient lower than -4.3 dB, and a transmission coefficient above -0.34 dB. The lens performance designed with three pair of grids, over an E-polarized plane wave, is experimentaly verified. Using a mathematical model for the design, the RADANT lens geometry and the adecuate configuration of the bias switches have been obtained, reaching electronic beam-steering angles of 11.35° and 8.6°, both of them with directivity greater than 14 dB.

Palabras llave : Radant lens; E-sectorial horn antenna; electronically beam scanning; p-i-n diode switches.

        · resumen en Español     · texto en Español     · Español ( pdf )