Resumen

HAIDER MUSSA, Zainab; FADHIL AL-QAIM, Fouad; YUZIR, Ali  y  SHAMELI, Kamyar. Electrochemical Degradation of Metoprolol Using Graphite-PVC Composite as Anode: Elucidation and Characterization of New by-products Using LC-TOF/MS. J. Mex. Chem. Soc [online]. 2020, vol.64, n.3, pp.165-180.  Epub 04-Jun-2021. ISSN 1870-249X.  https://doi.org/10.29356/jmcs.v64i3.1139.

Metoprolol (MTP) is one of pharmaceuticals used for treatment of heart failure and hypertension. It was frequently detected in wastewater samples either influent or effluent. The application of graphite-PVC composite as anode was investigated for the degradation of metoprolol in the presence of strong electrolyte such as sodium chloride (NaCl). The degradation rate was strongly influenced by initial concentrations of metoprolol, NaCl concentration and applied voltage. An initial concentration of 2 mg/L was eliminated more than 95% after 30 min under optimum conditions; 5000 mg/L NaCl and 5 V. The consumption energy of the electrochemical reaction was 0.665 Wh/mg for metoprolol after 30 min. The kinetic rate constant of metoprolol could be ranged between 0.0016 and 0.0801 min-1. The electrochemical degradation efficiency of metoprolol and its by-products has been achieved. The degradation of metoprolol produced four transformated products as investigated and elucidated using liquid chromatography-time of flight/mass spectrometry. The proposed degradation pathway of metoprolol was schemed on the base of the identified intermediates.

Palabras llave : Metoprolol; electrochemical degradation; by-products; solid phase extraction; LC-TOF/MS.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )