SciELO - Scientific Electronic Library Online

vol.62 issue2Single point calibration for quantitative speciation of selenomethionine in yeast Saccharomyces cerevisiae by HPLC-ICP-MS: using reliable, traceable and comparable measurementsMolecular Modeling and Chiral Separation of Benzodiazepines by Capillary Electrophoresis Using Highly Sulfated Cyclodextrins author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand




Related links

  • Have no similar articlesSimilars in SciELO


Journal of the Mexican Chemical Society

Print version ISSN 1870-249X


PEREZ-PADILLA, Yamile et al. Evaluation of Polydimethylsiloxane-Phenylsiloxane as a Coating for Stir Bar Sorptive Extraction. J. Mex. Chem. Soc [online]. 2018, vol.62, n.2, pp.348-357. ISSN 1870-249X.

Analytical pretreatment has become environmental-friendly because of material science assistance. In stir bar sorptive extraction (SBSE), a coating is typically used to isolate and preconcentrate organic compounds in aqueous samples. Here, a translucent coating based on polydimethylsiloxane and phenyltriethoxysilane was prepared by a sol-gel method. Characterization tests showed that the coating was homogeneous, relatively polar, and both thermally (< 400 °C) and chemically stable. Coated stir bars were evaluated in the SBSE experiments. Benzene derivatives were successfully extracted/preconcentrated from aqueous solutions and environmental waters. Furanic derivatives and antibiotics were moderately extracted from water, but they were extracted from isooctane.

Keywords : Sol-gel; polydimethylsiloxane; coating; SBSE; polyaromatics; furanics; antibiotics.

        · abstract in Spanish     · text in English     · English ( pdf )