SciELO - Scientific Electronic Library Online

 
vol.3 número4Simulación de grandes escalas de un flujo alrededor de un arreglo de tubos de sección circular índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Ingeniería mecánica, tecnología y desarrollo

versión impresa ISSN 1665-7381

Resumen

BRAVO, Agustín; SCHOUWENAARS, Rafael  y  ORTIZ, Armando. Desarrollo de las técnicas de producción y estudio de la solidificación de las aleaciones Cu-Mg-Sn para aplicaciones tribológicas. Ingenier. mecáni. tecnolog. desarroll [online]. 2010, vol.3, n.4, pp. 151-161. ISSN 1665-7381.

This work reviews the need for new formulations for the ductile triboalloy used in internal combustion engines. The Cu-Mg-Sn system will be identified as an interesting candidate to substitute Cu-Pb alloys. The production of thin slabs is complicated for this kind of alloys; the paper describes the technical solutions introduced, as well as the measurement of temperature during solidification. Attention will be paid to the optimal filtering of the cooling curves measured in the experiments. The feasibility and importance of the techniques developed will be illustrated trough a series of examples of successful castings, analysed by means of scanning electron microscopy. The paper demonstrates that producing and cold working of the thin Cu-Mg-Sn slabs is technically feasible with fairly simple laboratory techniques and will indicate the importance of the associated thermodynamic study. The necessary steps for future investigation are summarised briefly.

Palabras llave : Cu-Mg-Sn alloys; casting; cooling curves; thermodynamic equilibrium; metallography.

        · resumen en Español     · texto en Español     · pdf en Español