Resumen

HERMANTO, D. et al. Design and synthesis of the polyvinyl chloride (PVC) membrane for Fe(III) ion selective electrode (ISE) based on ester modified humic acid (EHA) as an ionophore. J. appl. res. technol [online]. 2022, vol.20, n.6, pp.631-637.  Epub 08-Mayo-2023. ISSN 2448-6736.  https://doi.org/10.22201/icat.24486736e.2022.20.6.955.

Design and synthesis of the polyvinyl chloride (PVC) membrane as Fe(III) ion selective electrode (ISE) sensor based on ester modified humic acid (EHA) ionophore as an excellent sensory molecule for monitoring Fe(III) in the sample solution had been done. Simple and efficient EHA was made by condensation of carboxylic acid HA with ethanol and sulfuric acid as catalysts. PVC membrane was prepared by mixing all components such as PVC powder, EHA, plasticizer (o-NPOE and DOP), and anion lipophilic (Sodium-TPB and oleic acid) with a total weight of 100 mg and dissolved in 1 mL of dry THF. The electrode membrane responses showed that the electrodes were highly selective to ion Fe3+ at pH 3 with a response time of ±50 seconds. The dynamic range of the membrane ISE sensor was 10-1-10-7 M, with the value of the Nernst factor being ±19 mV per decade. The membrane electrode can be used for at least 5 weeks. The analytical results of Fe(III) measurement showed good conformity with the reference method (AAS), suggesting that the developed analytical tool could be used to measure and monitor Fe(III) in real water samples.

Palabras llave : PVC membrane; Fe(III); ion selective electrode; ester modified humic acid.

        · texto en Inglés     · Inglés ( pdf )