Resumo

VITON-ZORRILLA, Luighi; LEZAMA, Jinmi; ACOSTA, Rubén  e  RIOS-JULCAPOMA, Milton. Design and implementation of an alternative measurement system for MOSFET-Like sensors characterization. J. appl. res. technol [online]. 2018, vol.16, n.3, pp.229-240. ISSN 2448-6736.

This paper describes the design and implementation of an alternative system to measure electrical parameters (voltage and current) in order to characterize MOSFET-Like sensors. To design a signal conditioning circuit is necessary to understand the sensor behavior, therefore knowing its characteristics is essential. As sensor manufacturers do not usually provide the whole technical information about them, a measurement system is proposed to obtain those sensor characteristics with the aim of modeling the sensor device. This system is based on a MCU which generates voltages and measures currents via an external transimpedance amplifier, and it is supported by a software platform developed upon python based open source tools. Such combination offers a low cost system to stimulate and capture sensor responses which could be processed later to extract the characteristic parameters. The system was tested principally with an fon Sensitive Field Effect Transistor (1SFET) and results show the VDS-IDS and Ves curves obtained with it.

Palavras-chave : measurement system; sensor characterization; MCU; 1SFET.

        · texto em Inglês     · Inglês ( pdf )