SciELO - Scientific Electronic Library Online

 
vol.15 número3Design and evaluation of energy-efficient carbon nanotube FET-based quaternary minimum and maximum circuitsA comparative study of the use of local directional pattern for texture-based informal settlement classification índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Journal of applied research and technology

versión On-line ISSN 2448-6736versión impresa ISSN 1665-6423

Resumen

SARAVANAN, Subramani  y  RAMESH BABU, Neelakandan. A modified high step-up non-isolated DC-DC converter for PV application. J. appl. res. technol [online]. 2017, vol.15, n.3, pp.242-249. ISSN 2448-6736.  https://doi.org/10.1016/j.jart.2016.12.008.

A non-isolated high voltage gain DC-DC converter has been presented in this paper. The boost, SEPIC and modified SEPIC converters were analyzed and their performance was compared with the proposed converter. The proposed converter has been designed for the input voltage of15 V and an output voltage of 150 V with 100 W output power. The efficiency of the converter obtained was 92.5%, which is higher than that ofthe other converter models which were analyzed. Also, the proposed converter utilizes reduced input current and shows low switching voltaje stress. The time response analysis conveys that the proposed converter settles to the steady state voltage and current faster than the other compared converters.

Palabras llave : Boost converter; SEPIC; Photovoltaic; DC-DC power conversión.

        · texto en Inglés     · Inglés ( pdf )