Servicios Personalizados
Revista
Articulo
Indicadores
- Citado por SciELO
- Accesos
Links relacionados
- Similares en SciELO
Compartir
Journal of applied research and technology
versión On-line ISSN 2448-6736versión impresa ISSN 1665-6423
Resumen
ROMERO-JABALQUINTO, Alonso; VELASCO-TELLEZ, Abraham; ZAMBRANO-ROBLEDO, Patricia y BERMUDEZ-REYES, Bárbara. Feasibility of manufacturing combustion chambers for aeronautical use in Mexico. J. appl. res. technol [online]. 2016, vol.14, n.3, pp.167-172. ISSN 2448-6736. https://doi.org/10.1016/j.jart.2016.05.003.
The aeronautical sector is strategically important for the economic development of Mexico and has grown steadily over the last 10 years. Furthermore, it generates high added value for its products. In Mexico, the aircraft manufacturing sector mainly focuses on the fabrication of heat exchangers, seals, fuel ducts, and engine support rings. Currently, this sector is not involved in the manufacture of engine hot section components such as combustion chambers and turbine blades. Estimation of the associated costs enables assessment of the feasibility of fabricating such components. This study investigates the feasibility of establishing production lines for aeronautical combustion chamber fabrication in factories dedicated to the manufacture of aeronautical gas turbine engines.
Palabras llave : Combustion chamber; Superalloy; Forming; Forging.