Resumo

MIJAREZ-CASTRO, Rito; RODRIGUEZ-RODRIGUEZ, H. Joaquín; PASCASIO-MALDONADO, David  e  GUEVARA-GORDILLO, Ricardo. Communications System for Down-Hole Measurements. J. appl. res. technol [online]. 2013, vol.11, n.6, pp.903-911. ISSN 2448-6736.

Progressively deeper and hotter oil wells have driven design modification that enhances the performance in sensors and downhole electronic instruments. Oil reservoirs in Mexico are located at mean depths of 6,000 m; as a consequence, the requirements for measuring thermodynamic and geophysical parameters are challenging. This paper describes a bidirectional communication system that exchanges data from a down-hole high pressure and high temperature (HP/HT) measurement tool to the surface installation. The communication medium is a 7 km mono-conductor 1K22 logging cable used also as a power supply transmission line. The system consists of a proprietary downhole measurement tool, composed of a HT/HP sensor and a high temperature DSP-based electronic device, and a data acquisition equipment located in the surface installation. The system employs a communication algorithm that automatically changes the carrier frequency of the modulation technique employed, to avoid issues derived from noise interference, cable attenuation and thermal drift of the front end passive elements. The laboratory tests results provide a firm basis for testing and evaluating the system in the field.

Palavras-chave : Down-hole measurements; high temperature; oil wells data logging.

        · resumo em Espanhol     · texto em Inglês     · Inglês ( pdf )