SciELO - Scientific Electronic Library Online

 
vol.27 número1Effects of temperature and deposition time on the RF- sputtered CdTe films preparationDesign and simulation of a membranes-based acoustic sensors array for cochlear implant applications índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Superficies y vacío

versión impresa ISSN 1665-3521

Resumen

RAMIREZ-FERNANDEZ, O. et al. Plasma gradient modified scaffolds to generate a chemoattractant surface. Superf. vacío [online]. 2014, vol.27, n.1, pp.20-23. ISSN 1665-3521.

A gradient of plasma polymerization of pyrrole was generated to model a chemoattractant surface; it was obtained by changing the polymerization time to manipulate the thickness and the deposited layer. The polymerization was generated with a power of 30W on a cylindrical vacuum reactor, the coverslip was polymerized covered by a cavity with a surface exposed of 0.7 cm every 35 min., the cells seeded were liver stellate cells (Ito); it was evaluated against a coverslip with continuous plasma polymerization of pyrrole (Ppy). The results show similar protein secretions, but cells proliferation was selective in the surface gradient regions.

Palabras llave : Chemotaxis; Chemoattractant; Plasma Polypyrrole; Ito cells; Cell Culture; Modified Surfaces; Biomaterials.

        · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons