SciELO - Scientific Electronic Library Online

vol.21 número3Analysis of the potential upon the floating gate of an FGMOSFET used as a gas sensor índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados




Links relacionados

  • No hay artículos similaresSimilares en SciELO


Superficies y vacío

versión impresa ISSN 1665-3521


MORALES, J. et al. Autoensamble de capas de polímeros iónicos sobre polietileno funcionalizado por plasma de pirrol. Superf. vacío [online]. 2008, vol.21, n.3, pp.1-5. ISSN 1665-3521.

This work presents a superficial modification of low molecular weight polyethylene (PE) with the addition of alkaline phosphatase (FA). This enzyme promotes the biomineralization, hydrolysis of orthophosphates and increase the absorption of calcium. The superficial modification of PE starts with the addition of a thin layer of polypyrrole (PPy) synthesized by plasma to add amine groups on the surface. After that, sequential layers of two polyelectrolytes with different ionic charge were added to the PE-PPy surface by immersion in solutions of poly(allylamine hydrochloride) (+) (PAH) and polystyrene sulfonate (-) (PSS). The polyelectrolytes were self-assembled because of their opposite ionic charge. After this step, another layer of FA was added. Several sequences of polyelectrolytes were tested on the PE-PPy surface.. The characterization of the surfaces was done by attenuated reflectance infrared spectroscopy (ATR-IR) and scanning electron microscopy (SEM).

Palabras llave : Self Assembly layers; Plasma Polymerization; Alkaline Phosphatase; Polyelectrolytes.

        · resumen en Español     · texto en Español     · Español ( pdf )


Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons