SciELO - Scientific Electronic Library Online

 
vol.20 issue3Geochemical characterization and spatial distribution of heavy metals from urban dust in Chetumal, MexicoA low-cost methodology for implementing electronics integrated circuit, an application example author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería, investigación y tecnología

Print version ISSN 1405-7743

Abstract

SANCHEZ-SOTO, José Rafael et al. Vibration analysis system applied to fault detection in wind turbines. Ing. invest. y tecnol. [online]. 2019, vol.20, n.3, e028.  Epub Oct 15, 2019. ISSN 1405-7743.  https://doi.org/10.22201/fi.25940732e.2019.20n3.028.

Wind power is one of the most important renewable energy sources due to its vast availability. Wind turbines are the equipment required to take advantage of the wind energy potential; therefore, a low reliability of these turbines limits the maximum power obtained from the wind. Different techniques and methodologies have been developed to monitor and detect failures in wind turbines in order to prevent undesirable conditions due to different operating conditions. This work presents a system designed to detect failures in wind turbines caused by mechanical vibrations, this system allows to diagnose, online, different structural failures in the wind turbine through a statistical frequency analysis based on LabView and Matlab. The designed system is validated by online measurements, obtained by 3-axis vibrations sensors in a domestic wind turbine. A graphical interface is developed in LabView in order to facilitate the online location and isolation of the detected failures.

Keywords : Wind turbine; fault detection; vibration measurements; wind energy; online monitoring.

        · abstract in Spanish     · text in English     · English ( pdf )