SciELO - Scientific Electronic Library Online

 
vol.14 número3Emisiones superficiales de metano en un relleno sanitario en Mérida, Yucatán, MéxicoEstudio de la temperatura de crecimiento sobre la cristalinidad en películas delgadas de BaTiO3 índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Ingeniería, investigación y tecnología

versão On-line ISSN 2594-0732versão impressa ISSN 1405-7743

Resumo

VILLEGAS-CARDENAS, José David et al. Prediction of Hardness of the Zn-Al-Cu Alloys of Agreement by Composition in Weight. Ing. invest. y tecnol. [online]. 2013, vol.14, n.3, pp.311-316. ISSN 2594-0732.

Ten alloys Zn - Al - Cu were developed in two parts, in agreement to two zones presented in the isopleth diagrams (Villas et al., 1995). The percentage of Cu and Al was systematically varied. Subsequently, hardness measurements were performed. These measurements allowed establishing two equations that predict the hardness with an error lower than 5%. With these equations, it is possible to obtain alloys that replace Al base alloys by a Zn base alloy, having the same hardness. This implicates also the elimination of the volumetric change in the presence of ε phase.

Palavras-chave : hardness; phase; dendritic; Gibbs energy; percent by weight; Zn-Al-Cu.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons