SciELO - Scientific Electronic Library Online

 
vol.14 issue3Superficial Methane Emissions from a Landfill in Merida, Yucatan, MexicoSubstrate Temperature Study in the Crystallinity of BaTiO3 Thin Films author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand

Journal

Article

Indicators

Related links

  • Have no similar articlesSimilars in SciELO

Share


Ingeniería, investigación y tecnología

On-line version ISSN 2594-0732Print version ISSN 1405-7743

Abstract

VILLEGAS-CARDENAS, José David et al. Prediction of Hardness of the Zn-Al-Cu Alloys of Agreement by Composition in Weight. Ing. invest. y tecnol. [online]. 2013, vol.14, n.3, pp.311-316. ISSN 2594-0732.

Ten alloys Zn - Al - Cu were developed in two parts, in agreement to two zones presented in the isopleth diagrams (Villas et al., 1995). The percentage of Cu and Al was systematically varied. Subsequently, hardness measurements were performed. These measurements allowed establishing two equations that predict the hardness with an error lower than 5%. With these equations, it is possible to obtain alloys that replace Al base alloys by a Zn base alloy, having the same hardness. This implicates also the elimination of the volumetric change in the presence of ε phase.

Keywords : hardness; phase; dendritic; Gibbs energy; percent by weight; Zn-Al-Cu.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )

 

Creative Commons License All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License