SciELO - Scientific Electronic Library Online

 
vol.12 número3Incorporación de un modelo de generador eólico al análisis de flujos dinámicos de potenciaMaximización del índice vida útil/volumen de los filtros usados en accionadores de máquinas eléctricas índice de autoresíndice de materiabúsqueda de artículos
Home Pagelista alfabética de revistas  

Servicios Personalizados

Revista

Articulo

Indicadores

Links relacionados

  • No hay artículos similaresSimilares en SciELO

Compartir


Ingeniería, investigación y tecnología

versión On-line ISSN 2594-0732versión impresa ISSN 1405-7743

Resumen

MORENO-VIRGEN, M.R. et al. Laser Radiation CO2 Effects in Cement Paste at Different Hydration Stages after Preparation. Ing. invest. y tecnol. [online]. 2011, vol.12, n.3, pp.321-328. ISSN 2594-0732.

In this work the changes occurring in cement pastes irradiated by 10.6¡mi CO2 laser at different stages of hydration after preparation are presented. Raman spectroscopy, X-ray diffraction and Scanning Electronic Microscopy (SEM) techniques were used to observe molecular structural changes. Intensity of cement paste Raman peaks after laser irradiation was monitored in samples irradiated 2, 3, 4, 5, 6, 7, 8, 9,10 and 11 days after their preparation. Applied laser power changed Raman peaks intensity at 187.5cm-1,563cm-1, 695cm-1, 750cm-1, 897cm-1,1042cm-1 and 1159cm-1 that correspond to compounds already present in cement pastes. X-ray diffraction, SEM images and changes in the Raman peaks confirm the recrystalization of cement paste compounds into new phases (alite and belite) after irradiation. The produced changes show a clear dependence on the applied laser power density and age of samples.

Palabras llave : cement paste; laser; characterization; hydration stages.

        · resumen en Español     · texto en Inglés     · Inglés ( pdf )

 

Creative Commons License Todo el contenido de esta revista, excepto dónde está identificado, está bajo una Licencia Creative Commons