SciELO - Scientific Electronic Library Online

 
vol.46 número1Rendimiento de frijol (Phaseolus vulgaris L.) en relación con la concentración de vermicompost y déficit de humedad en el sustratoComponentes de la producción primaria neta aérea en una plantación de Bambusa oldhamii índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Agrociencia

versão On-line ISSN 2521-9766versão impressa ISSN 1405-3195

Resumo

REYES-AROCA, José F.; BERRIOS-ARAYA, David F.; ORTEGA-BLU, Rodrigo A.  e  ESQUIVEL-FLORES, Wilson D.. Static calibration of a system for automatic control of fertilizer variable dosage. Agrociencia [online]. 2012, vol.46, n.1, pp.51-62. ISSN 2521-9766.

In general, fertilizer seeder machines are designed for a nominal rate range that may vary depending on the type of fertilizer to use, which requires its calibration for each specific type of application. In this experiment a system of automatic control of variable-rate fertilization was implemented and evaluated in the laboratory. The system consists of a microcontroller with liquid crystal display (LCD), a proportional electro-valve of hydraulic flow control, a hydraulic motor mounted on the dispenser shaft of the seeder machine and a speed sensor of rotation of the shaft dispenser. The control software of this system operates with prescription map of fertilizer rate, based on site-specific fertility of soil previously determined. The system was calibrated for rates from 70 to 130 kg ha-1 for a controlled-release fertilizer (FLC) called Basacote Starter (BS) of uniform granulometry, and a rate from 190 to 420 kg ha-1 for a physical mixture (MF) of fertilizer (urea 29 % + diammonium phosphate 71 %). The calibration constants calculated were 259.6 cm3 rev-1 for FLC and 270.2 cm3 rev-1 for MF, which were charged to the microcomputer for a static-automatic calibration. The final automatic calibration indicated that the coefficient of variation in the rate of the automatic system varies from 0.37 % for a target rate of 70 kg ha-1 with Starter Basacote at 3.74 % to a target rate of 420 kg ha-1 in MF. In addition, the expected error of rating of the automatic system in the field can vary from 0.19 kg ha-1 for a target rate of 70 kg ha-1 of Basacote Starter at 29.26 kg ha-1 for a target rate of 420 kg ha-1 of MF.

Palavras-chave : variable rate; dispenser; precision agriculture.

        · resumo em Espanhol     · texto em Espanhol     · Espanhol ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons