SciELO - Scientific Electronic Library Online

vol.28 issue1Adaptation of the agricultural sector to climate change: proposal for measures at a fine spatial scale in Guasave, Sinaloa, MexicoAn epistemological obstacle to the study of technology author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand




Related links

  • Have no similar articlesSimilars in SciELO


Acta universitaria

On-line version ISSN 2007-9621Print version ISSN 0188-6266


LIMON LEYVA, Pablo Alberto et al. Analysis of residual stresses in the Roll Hemming Process using the Barkhausen Magnetic Noise. Acta univ [online]. 2018, vol.28, n.1, pp.57-63. ISSN 2007-9621.

Hemming is a manufacturing process, consisting on folding a sheet metal onto itself or another sheet metal. In this work, Magnetic Barkhausen Noise (MBN) was implemented for the identification of residual stresses and their variations through the stages of Roll Hemming process. Initially, the inspection process over hemmed ASTM A36 specimens is detailed. For this study, a S6519 probe was selected to perform measurements at 5 different regions on the specimens’ edges, obtaining average values of intensity of MBN for each stage of Roll Hemming process. The variation of the obtained results was identified and discussed. Finally, the analysis of the absence or presence of residual stresses and their effect on the magnetic behavior of the material is presented. Obtained results allow us to determine the feasibility of MBN implementation for the inspection of hemmed parts in production lines.

Keywords : Roll Hemming; Magnetic Barkhausen Noise; residual stresses.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )