SciELO - Scientific Electronic Library Online

vol.26 issue6Diversity, most important species and size composition of mollusks in coastal fisheries in Acapulco, Guerrero, MexicoConstruct validation and reliability of self-efficacy to the condom use scale on college Mexican students author indexsubject indexsearch form
Home Pagealphabetic serial listing  

Services on Demand




Related links

  • Have no similar articlesSimilars in SciELO


Acta universitaria

On-line version ISSN 2007-9621Print version ISSN 0188-6266


DIOSDADO DE LA PENA, José Ángel et al. Optimization of Barlat 3 parameter material model with aluminum alloy experimental curves. Acta univ [online]. 2016, vol.26, n.6, pp.35-43. ISSN 2007-9621.

This paper presents computed constants of 3 parameter Barlat material model, hardening coefficient (n), strength coefficient (K) and anisotropic constants (r00, r45, and r90) obtained from tensile test data for sheet type specimens at different rolling direction (0°, 45°, and 90°). These anisotropic parameters from an aluminum alloy sheet are used to feed three parameter Barlat material model in LS-DYNA® software, to generate a file that is required to perform an optimization in LS-OPT® software. Experimental data is used to generate real strain-real stress curves, and are compared with those obtained from LSDYNA® simulations with optimized parameters, getting a closer curve to experimental data, particularly in plastic zone.

Keywords : Optimization; Barlat parameters; hardening exponent; plastic-strain ratio; constant of proportionality.

        · abstract in Spanish     · text in Spanish     · Spanish ( pdf )