SciELO - Scientific Electronic Library Online

 
vol.68 número3Al-Si-Cu alloy enhanced to high-temperature application by nickel additionHydrophobization of paper intended for packaging índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


Revista mexicana de física

versão impressa ISSN 0035-001X

Resumo

ESQUIVEL-MENDEZ, L. A. et al. CdTe mini-modules characterization and photovoltaic performance under outdoors conditions. Rev. mex. fis. [online]. 2022, vol.68, n.3, e031005.  Epub 14-Abr-2023. ISSN 0035-001X.  https://doi.org/10.31349/revmexfis.68.031005.

Polycrystalline CdTe thin films deposited in large areas present some difficulties, such as non-uniformity over the entire area. It is well known that the ratio between the thickness and grain size of CdTe thin films is approximately one. In contrast, the pin holes in CdTe should be minimized. CdS thin films as window materials must guarantee a uniform transparent film free of pinholes to avoid short-circuit in the photovoltaic device. In this work, CdTe and CdS thin films are reported in areas of 40 cm2 with optimal physical properties for potential application on solar cells. CdTe mini-modules were fabricated using CdTe and CdS layers obtained and characterized under outdoor conditions. The current-voltage measurements were performed under different load and solar irradiance conditions.

Palavras-chave : CdTe mini-modules; solar cells; thin films; CdS; CdTe.

        · texto em Inglês     · Inglês ( pdf )